• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.23-30
• /
• 2005

In this paper, OPPS(oxidized porous poly-silicon) field emitters were fabricated by using various emitter-electrode metal and these electron emission characteristics were investigated for different thermal annealing effects. The addressed OPPS field emitter with Pt/Ti emitter electrode annealed at $300^{\circ}C$-1hr showed the efficiency of $2.98\%$ at $V_{ps}$=12 V and one annealed at $350^{\circ}C$-1hr showed the highest efficiency of $3.37\%$at $V_{ps}$=16V. They are resulted from the improvement of interfacial contact characteristics of thin emitter metal to an oxidized porous poly-silicon and the decrease of electrical resistance of emitter metal. The brightness of the OPPS field emitter increases linearly in $V_{ps}$ and after oxidation process for $900^{\circ}C$-50min, the brightness of the OPPS field emitter with the as-deposited Pt/Ti emitter electrode was 3600 cd/$m^2$ at the $V_{ps}$=15 V, 6260 cd/$m^2$ at the $V_{ps}$=20 V. Thermal treatment improved the adhesion between the Ti buffer layer and the oxidized porous poly-silicon and also played an important role in the uniform distribution of electric field to the emitter electrode.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.510-519
• /
• 2011

Intra mode decision is a useful coding tool in Distributed Video Coding (DVC) for improving DVC coding efficiency for video sequences having fast motion. A major limitation associated with the existing intra mode decision methods, however, is that its efficiency highly depends on user-specified thresholds or modeling parameters. This paper proposes an entropy-based method to address this problem. The probabilities of intra and Wyner?Ziv (WZ) modes are determined firstly by examining correlation of pixels in spatial and temporal directions. Based on these probabilities, entropy of the intra and the WZ modes are computed. A comparison based on the entropy values decides a coding mode between intra coding and WZ coding without relying on any user-specified thresholds or modeling parameters. Experimental results show its superior rate-distortion performance of improvements of PSNR up to 2 dB against a conventional Wyner?Ziv coding without intra mode decision. Furthermore, since the proposed method does not require any thresholds or modeling parameters from users, it is very attractive for real life applications.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.21-31
• /
• 2014

This study aims to comparison of spatial composition that Okhojeong garden and Seokpajeong garden. Construct background and space structure in both of Okhojeong garden and Seokpajeong garden is analyzed. The results were as follows. First, Okhojeong garden and Seokpajeong garden of the nobles gardens in late Joseon dynasty. They had the advanced techniques of contemporary based on their political power and wealth, and therefore could built garden and enjoy the garden culture of the upper layer. Furthermore, composition of the Okhojeong garden can be assumed that it is related to construction of the Seokpajeong garden through analysis of the relationship between builders. Secondly, Space structure of Okhojeong garden and Seokpajeong garden is divided into pavilion unit of small gardens with living space as the center. Construction pavilion in each garden space imbues certain landscape theme. In addition, authorization of characteristics of a place in each area is attempted through boundary establishment and selective garden culture of varied seasonal landscape. Thirdly, In Seokpajeong garden, most of construction characteristics of Okhojeong garden are appeared. This indicates that Seokpajeong garden was affected by space-configuration-technique of Okhojeong garden such as acceptation or modification recreation. Fourth, In many cases, fanciers regarding floriculture are expanded to enthusiasts in late Joseon dynasty. In Okhojeong garden and Seokpajeong garden, herbaceous ornamental is considered to be precious and garden materials such as water tray, stone couch, oddly shaped stone, potted plant, artificial hill, wisteria trellis are diversified at the time.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.85-100
• /
• 2010

Devonian Cairn Formation is one of the important hydrocarbon reservoirs in Alberta, Canada. However, the Cairn Formation, outcropped in the study area, is not prospective reservoir with poor porosity and permeability by some late diagenetic processes. In this study, geochemical characteristics of the Cairn Formation were studied to use these preliminary results for advanced geological and geophysical petroleum explorations in the near future. Rock-Eval pyrolysis showed that total organic carbon content is less than 0.3 wt.%, indicating a minor amount of bitumen and/or other hydrocarbons. The carbonates in the Cairn Formation are mainly composed of subhedral and anhedral dolomites. Pore sizes in the carbonate are various, ranging from nanometer to micrometer. Clastic sediments increase in the upper and lower parts of the Cairn Formation, probably due to changing its depositional conditions. The Cairn Formation can also be divided into several intervals based on Ca/Mg ratio in dolomite and degree of amount of calcite. These could be formed by different sedimentary environment, degree of cementation and recrystallization, different saline/fresh water, etc.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.227-239
• /
• 2008

Processing LiDAR (Light Detection And Ranging) data obtained from ALS (Airborne Laser Scanning) systems mainly involves organization and segmentation of the data for 3D object modeling and mapping purposes. The ALS systems are viable and becoming more mature technology in various applications. ALS technology requires complex integration of optics, opto-mechanics and electronics in the multi-sensor components, Le. data captured from GPS, INS and laser scanner. In this study, digital image processing techniques mainly were implemented to gray level coded image of the LiDAR data for building extraction and superstructures segmentation. One of the advantages to use gray level image is easy to apply various existing digital image processing algorithms. Gridding and quantization of the raw LiDAR data into limited gray level might introduce smoothing effect and loss of the detail information. However, smoothed surface data that are more suitable for surface patch segmentation and modeling could be obtained by the quantization of the height values. The building boundaries were precisely extracted by the robust edge detection operator and regularized with shape constraints. As for segmentation of the roof structures, basically region growing based and gap filling segmentation methods were implemented. The results present that various image processing methods are applicable to extract buildings and to segment surface patches of the superstructures on the roofs. Finally, conceptual methodology for extracting characteristic information to reconstruct roof shapes was proposed. Statistical and geometric properties were utilized to segment and model superstructures. The simulation results show that segmentation of the roof surface patches and modeling were possible with the proposed method.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.183-199
• /
• 2008

This study is focused on characterization of the physio-chemical and mineralogical properties, investigation of their vertical changes in the tailing profile of the Guryoung mining area, classification of the profile into distinct zones, and condition conceptual model of physio-chemical conditions and phases-water relationships controlling the element behaviors in the tailings. The upper part of the groundwater is characterized by the high contents of $Fe_2O_3$ and $SO_3$ for whole rock analysis, low pH, and the occurrence of jarosite, schwertmannite and Fe-oxyhydroxide as the secondary mineral phases. The tailing profile can be divided into the covering soil, jarosite zone, Fe-sulfate zone, Fe-oxyhydroxide and gypsum-bearing pyrite zone, calcite-bearing pyrite zone, soil zone, and weathered zone on the based of the geochemical and mineralogical characteristics. The profile can be sampled into the oxidized zone and the carbonate-rich primary zone with the dramatic changes in pH and the secondary mineral phases. The conceptual model proposed for the tailing profile can be summarized that the oxidation of pyrite is the most important reaction controlling the changes in pH, the dissolution of the primary silicates and carbonates, the precipitation of secondary mineral phases, acid-neutralizing, and heavy metal behaviors through the profile.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.110-118
• /
• 2018

Due to recent earthquakes, there is a growing awareness that Korea is not a safe zone for earthquakes any more. Therefore, the review of various aspects of the seismic safety of the infrastructures are being carried out. Because of the characteristics of the underground structure buried in the ground, the electric power utility tunnels must be considered not only for the inertia and load capacity of the structure itself but also the characteristics of the surrounding soils. An extensive and accurate numerical analysis is inevitably required in order to consider the interaction with the ground, but it is difficult to apply the soil-structure interaction analyses, which generally requires high cost and extensive time, to all electric power utility tunnel structures. In this study, the major design variables including soil characteristics are considered as independent variables, and the seismic safety factor, which is the result of the numerical analysis, is considered as a dependent variable. Thus, a method is proposed to select vulnerable electric power utility tunnels with low seismic safety factor while excluding costly and time-consuming numerical analyses through the direct correlation analysis between independent and dependent variables. Equations of boundary limits were derived based on the distribution of the seismic safety factor and the cover depth and rebar amounts with high correlation relationship. Consequently, a very efficient and simple approach is proposed to select vulnerable electric power utility tunnels without intensive numerical analyses. Among the 108 electric power utility tunnels that were investigated in this paper, 30% were screened as fragile structures, and it is confirmed that the screening method is valid by checking the safety factors of the fragile structure. The approach is relatively very simple to use and easy to expand, and can be conveniently applied to additional data to be obtained in the future.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.121-136
• /
• 2002

The $CO_2$-rich springs in the Kyungpook Province has been found at 16 locations. Most of the $CO_2$-rich springs outflow along either fault zones or the geologic boundary between Mesozoic granites and their adjacent rocks. The $CO_2$-rich water samples show a high $CO_2$ concentration ( $P_{CO2}0.46 to 5.21 atm), weak acidic pHs, wide electrical conductivity values ranging from 422 to 2,280 $\mu\textrm{S}$/cm, and high re content. They are classified into the ca-HC $O_3$ type in chemical composition.$\delta$$^{18}$ O and $\delta$$^2$H data indicate that $CO_2$-rich water is meteoric origin. The $\delta$$^{13}$ C values (-1.5$\textperthousand$ to -6.1$\textperthousand$ PDB) suggest that dissolved $H_2$C $O_3$$^{0}$ C $O_3$- are mainly derived from a deep-seated $CO_2$ and carbonate minerals. The thermodynamic equilibrium state between $CO_2$-rich water and major minerals, and hydrochemical characteristics indicate that major source minerals determining the chemical composition of $CO_2$-rich water are carbonate minerals, plagioclase, K-feldspar and Fe-oxides. Under high $CO_2$ pressure and the weak acidic condition, most of the $CO_2$-rich water samples are thermodynamically in the dissolution state with respect to albite and carbonate minerals.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.77-81
• /
• 2013

The objective of this study is experimentally to investigate natural convective heat transfer characteristics of the ferrofluid for a concentric annuli under rotating magnetic field with variations of the revolution and the magnetic field strength. The rotating magnetic field was provided by induction motor with 6 poles and 3 phases and the revolution and the magnetic field strength were controlled by an inverter driver and a voltage meter, respectively. Temperatures of the inner pipe and the outer pipe in the tested concentric annuli were maintained at $30^{\circ}C$ and $25^{\circ}C$, respectively, during the test and the direction of the rotating magnetic field was a counterclockwise. As a result, the natural convective heat transfer characteristics of the ferrofluid for a concentric annuli were increased with the rise of the revolution and magnetic field strength due to the increased heat dissipation between hot side and cold side of the concentric annuli.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.125-133
• /
• 1993

Most studies on the vibration analysis of a beam-column with ends elastically restrained and various intermediate constraints have been based on the Euler beam theory, which is inadequate for beam-columns of low slenderness ratios. In this paper, analytical methods for vibration and dynamic sensitivity of a Timoshenko beam-column with ends elastically restrained and various intermediate constraints are presented. Firstly, an exact solution method is shown. Since the exact method requires considerable computational effort, a Rayleigh-Ritz analysis is also investigated. In the latter two kinds of trial functions are examined for comparisions : eigenfunctions of the base system(the system without intermediate constraints) and polynomials having properties corresponding to the eigenfunctions of the base system. The results of some numerical Investigations show that the Rayleigh-Ritz analysis using the characteristic polynomials is competitive with the exact solutions in accuracy, and that it is much more efficient in computations than using the eigenfunctions of the base system, especially in the dynamic sensitivity analysis. In addition, the prediction of the changes of natural frequencies due to the changes of design variables based on the first order sensitivity is in good agreements with that by the ordinary reanalysis as long as the changes of design variables are moderate.