• Tribology and Lubricants
• /
• v.12 no.3
• /
• pp.12-25
• /
• 1996

The friction and wear behaviors of ceramics against steels with lubricants were investigated and compared with those observed in air. Lubrications wbre done by a water and a commercial engine oil as received. The investigated ceramics were $Al_{2}O_{3}$, SiC, and $Si_{3}N_{4}$. Steels with 0.2 wt.% C were heat treated to obtain tempered structure. A cylinder-on-plate tribometer with rotated sliding motion was used to carry out the experiments. In the experiments reported here, the ranges of different testing speeds and loads were used. It was found that the friction and wear characteristics of tested pairs were significantly influenced by environments. In water and oil environments the wear of ceramics was reduced from 10$^{-6}$ g/s down to 10$^{-8}$ g/s in dry sliding at the same values of the frictional power which are the products of the friction coefficient, the load and the sliding speed. SiC showed excellent wear resistant behavior in water sliding, which was the lowest among tested ceramics, but it was, very poor in oils. In case of $Si_{3}N_{4}$, the wear rates were very low under oil environment, but the highest in water. The wear rates of $Al_{2}O_{3}$ were very low in both lubricating conditions at low values of the frictional power, but high at high values of the frictional power.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.11-21
• /
• 2014

Multi-scale image segmentation is important in many applications such as image stylization and medical diagnosis. This paper proposes a novel segmentation algorithm based on MSER(maximally stable extremal region) which captures multi-scale structure and is stable and efficient. The algorithm collects MSERs and then partitions the image plane by redrawing MSERs in specific order. To denoise and smooth the region boundaries, hierarchical morphological operations are developed. To illustrate effectiveness of the algorithm's multi-scale structure, effects of various types of LOD control are shown for image stylization. The proposed technique achieves this without time-consuming multi-level Gaussian smoothing. The comparisons of segmentation quality and timing efficiency with mean shift-based Edison system are presented.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.43-43
• /
• 2011

본 연구에서는 한강제방 취약구간인 성산대교와 잠실철교 부근 지역에 대한 홍수범람을 수치모의 하였다. 사용된 수치모형은 스위스의 Beffa에 의해 개발된 FLUMEN(FLUvial Modeling ENgine)으로서 스위스, 독일, 오스트리아 등에서 홍수범람해석에 사용된 바 있는 모형이다. 제방 취약지역은 한강 하천정비기본계획(2002)과 대학과 연계한 하천관리에 관한 연구용역(2단계 4차년)에 제시된 HEC-RAS 부등류 해석에 의해 계산된 홍수위와 기존 제방의 높이를 비교하여 산정하였다. 범람모의를 위해 HEC-RAS 부정류 해석을 통해 경계조건을 산정하고, FLUMEN을 이용하여 한강제방의 취약지역에 대한 범람모의와 파제 시나리오를 작성하여 파제에 따른 범람모의를 실시하고 적용성을 검토하였다. 제방 취약지역에서 월류로 인한 범람이 발생하였고, 이로 인해 일부 주거지역이 침수되었다. 가상 파제시나리오를 통한 수치모의 결과에서 여의도에서 $2.179km^2$의 넓은 지역에 침수현상이 계산되었으며, 최대 침수심은 5.054m로 성산대교 남단의 가상 파제 시나리오에서 계산되었다. 수치모의 결과 FLUMEN은 한강유역의 범람모의에 적합하다고 판단되며, 본 연구는 홍수 방어대책을 수립함에 있어 홍수 취약지역의 선정과 수공구조물의 설치 방향을 결정하는데 기초자료로 활용이 기대 된다. 정확도를 높이려면 보다 정밀한 제내지, 제외지의 측량자료의 적용, 내수 침수모형과의 연계, 조밀한 불규칙 삼각망의 작성이 필요하며, 국내실정에 맞는 정확한 적용기준마련과 유역의 수리학적 특성이 고려된 홍수해석 모형의 개발이 필요하고 보다 정확한 조도계수의 산정을 위한 지속적인 연구가 필요하다.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2002.10a
• /
• pp.17-30
• /
• 2002

삼척-도계지역 일대에 분포하는 조선누층군의 풍촌층 석회석은 품위 및 암상에따라 상부고품위대와 하부석회암대로 분대가 가능한데, 이는 삼척-태백간을 북북동으로 흐르는 오십천을 경계로 서쪽에 분포하는 풍촌층과 비교할 때 다소간의 암상차이를 보인다. 즉, 풍촌층의 특징중에 하나인 중부백운암대가 본 역 일대에서는 백운암화가 미약하여 비교적 소폭으로 확인되며, 상부백색대 역시, 발달정도가 미약한 특징을 보인다. 시추탐사결과 확인된 삼척-도계지역의 풍촌층 상부고품위대는 일반적으로 상부백색대$(\pm15m)$ - 백운암대$(\pm5m)$ - 암회색대$(\pm50m)$로 구분되는 것으로 나타났다. 각각의 품위는 상부백색대 : CaO $53_4\~55.6\%$, 백운암대 : MgO $3.0\~18.4\%$, 암회색대 : CaO $50.4\~54.2\%$로 나타나 제철용으로의 사용이 가능하나 백운암대에 대한 선별채광이 부분적으로 요망된다. 이들 석회석은 오십천대단층의 수반단층인 수조의 NNE계열 정단층들에 의해 빈번히 단절되어 있으며 일부지역에서는 EW향의 역단층에 의해 규제되기도 한다. 상기 제단층들은 석회암층을 단절시킬 뿐만 아니라 단층각력, 단층점토, 암맥 등의 불순대를 수반하므로 개발에 장애요소가 되고 있다. 상부고품위대 부존표고는 지역에 따라 다소 차이가 있으나 200ML 내외에서 대부분 확인이 가능하며 지표노출 규모는 작은 편이나 $10^{\circ}$이하의 완경사로 화절층 하부에 부존되어 있어 갱도 채광에 적합한 형태를 이루고 있다.

• Journal of Environmental Science International
• /
• v.21 no.2
• /
• pp.145-152
• /
• 2012

The mean wind speed and turbulence intensity profiles in the atmospheric boundary layer were extracted from a LIDAR remote sensing campaign in order to apply for CFD validation. After considering the semi-steady state field data requirements to be used for CFD validation, a neutral atmosphere campaign period, in which the main wind direction and the power-law exponent of the wind profile were constantly maintained, was chosen. The campaign site at the Pohang Accelerator Laboratory, surrounded by 40~50m high hills, with an apartment district spread beyond the hills, is to be classified as a semi-complex terrain. Nevertheless, wind speed profiles measured up to 100m above the ground fitted well into a theoretical-experimental logarithmic-law equation. The LIDAR remote-sensing data of the sub-layer of the atmospheric boundary layer has been proven to be superior to the data obtained by conventional extrapolation of the wind profile with 2 or 3 anemometer measurements.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.165-171
• /
• 2012

Here is implemented MATLAB program to analyze the characteristic curves of cyclic voltammetry which involves the multi-electron electrode reaction considered as key processes in electrochemical systems. For the electrochemical mass-transfer system, Fick's concentration equation subject to semi-infinite diffusion model for the boundary condition was discretized and solved by the explicit finite difference method. The resulting concentration values were converted into currents at each node by using Butler-Volmer equation. Based on the good agreement between the present numerical solution and the existing experimental results, effects of kinetic constants and CV scan rates on the reaction mechanism in multi-electron transfer processes were investigated effectively.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.27-34
• /
• 1995

In this paper, an X-band TDRO(transistor dielectric resonator oscillator) is designed and experimented with the oscillator constructed. Design of the TDRO is carried out by deriving analycally the coupling parameters between a microstrip line and a dielectric resonator. The coupling parameters take account of the relations among substrate material, ground plane, metallic boundaries surrounding the resonator, distance between a microstrip line and a resonator. Two criteria, external quality factor and coupling coefficient, have been chosen in order to evaluate the performance of the TDRO designed. TDRO studed in this paper may be useful for the application of a microwave system requiring a stable and effective oscillator frequency.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.606-613
• /
• 2004

One of the major forces that causes landslide is the amount of underground water resulted from rainfall and shear strength. As a result of close study on the landslide area affected by typoon Rusa it is observed that many landslides took place at the interface of rock and soil. Based on this observation that shear strength at the interface played a great role in landslide of the hilly area, two shear strengths were measured on different places, one at the interface between rocks and soil and the other just on soil. The two values thus derived were compared and used to review the safety factor for the hilly areas already collapsed. Back analysis was also used to calculate the ground water table according to the different rock types at the time when degradation happened.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.79-89
• /
• 2002

A synchronization method is presented for IEEE 802.11a wireless OFDM system. First the coarse symbol synchronization is achieved by measuring the moving power average of the received envelope signal. The detection probabilities and optimum thresholds for the symbol synchronization are derived. By measuring the correlation between the short training signal and received envelope signal, fine symbol synchronization can be acquired. And the frequency synchronization is achieved using long training signal. A symbol synchronization error causes a phase rotation of the constellation. After the compensation for fading channel, the rotation due to the symbol timing error can be corrected. With this method, synchronization can be well achieved over frequency selective channels.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.3
• /
• pp.65-72
• /
• 1990

Theoretical expressions were dcrived for the numher of fibers per unit cross-sectional area in fiber reinforced concrete, with due consideration given to the effects of the surrounding boundaries. The number of fibers per unit cross-sectional area in steel fiber reinforced concrete was also measured experimentally for the specimens incorporating various volume fractions of fibers of different types. Statistical evaluation of the measured value was then performed in order to assess the differences in fiber concentration at different location on tbe cross section. Degree of reorientation of steel fibers in concrete occuring during vibration was examined by com¬paring the differences in the computed and measur'ed values of the number of fibers per unit cross-sectional area.