• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.25-32
• /
• 2009

The present paper focuses on the analysis of aero-acoustics characteristic by appling different four boundary conditions. The high-order and high-resolution numerical schemes are used for discrete accurate computation of compressible flow. The four boundary conditions include extrapolation, characteristic boundary condition, zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated against measurement data and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. The characteristics of secondary frequency is predicted by three kinds of boundary conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.3960-3969
• /
• 1996

A fluid flow inside a circular cylinder subject to horizontal and circular oscillation is analyzed theoretically. Under the assumption of small-amplitude oscillation, the governing equations take linear forms. The velocity field is obtained in terms of the first kind of Bessel function of order 1. It was found that a particle describes an orbit close to a circle in the central region and an arc near the side wall. We also obtained the Stokes' drift velocity induced by the traveling wave along the circumferential direction. The Eulerian streaming velocities at the edge of the bottom and side boundary layers were also obtained. It was shown that the vertical component of the steady streaming velocity on the side wall is almost proportional to the amplitude of the free surface motion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.802-813
• /
• 2000

This paper represents numerical computations of the interaction between the longitudinal vortex and a flat plate 3-D turbulent boundary layer. In the present study, the main interest is in the behavior of longitudinal vortices introduced in turbulent boundary layers. The flow field behind vortex generator is modeled by the information that is available from studies on the delta winglet. Also, the Reynolds-averaged Navier-Stoke equations for three-dimensional turbulent flows, together with a two-layer turbulence model to resolve the near-wall flow, is solved by the method of pseudo compressibility. The present results show that the boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall, and have a good agreement with the experimental data.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.113-114
• /
• 2003

도시지역 하층대기의 오존 연직분포는 지표부근의 NOx배출의 영향과 대기경계층의 일변화 및 구조적 특성에 의해 시·공간적으로 큰 변화를 나타낸다. 일반적으로 야간에는 역전층 내의 건성침적과 NOx 적정작용에 의해 오존농도가 감소하며, 하층 안정층과 분리되어 있는 잔류층(residual layer)의 오존농도와 큰 차이를 보이게 된다. 아울러 일출 후 안정층 파괴와 혼합고 성장에 의해 지표부근의 오존농도가 증가하고 연직적으로 비교적 일정한 오존분포가 나타난다(Zang et al., 1998; Berkowitz et al., 2000). (중략)

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.5
• /
• pp.33-41
• /
• 2000

Three dimensional flow fields around passenger car body was computed by PAM-FLOW, well-known and validated computer program for thermal and fluid analysis. Regarding the computational method, a Navier-Stokes solver based on finite element method with various turbulent models and adaptive grid technique (H-refinement)was adopted. The results were physically reasonable and compared with experimental data, giving good agreement. It was found that three dimensional flow simulation with H-refinement technique had potential for prediction of low fie이 around vehicle and the ability to predict vortex in the wake, which is vital for CFD to be used for automobile aerodynamic calculation.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1775-1780
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of an epicyclic gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.437-443
• /
• 1988

We calculate the distribution of the current on the strip by the incident waves on the infinite conducting strip line. The boundary equations represented as the spatial domain function become very complicated equations including convolution integral. Transformed it to the spectral domain, we have a very simple equation is composed by some algebraic multiplication of the current density function and Green's function. the acceleration of iteration procedure is achieved by Kastner's method. The result of iteration gives us the optimum value when it satisfies the iteration stop condition presented in this paper. We confirmed that the induced current density distribution on the stripline has been changed as variaties of the width.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.79-81
• /
• 2006

커널(Kernel)을 이용한 분류 방법은 넓은 마진(large margin) 분류기로서 SVM(Support Vector Machine)을 주로 사용하게 된다 하지만, 이 방법은 라그랑제 파라미터(Lagrange Parameter)의 최적화 과정을 포함함으로써 학습 과정을 쉽지 않게 만든다. 이 최적화 과정은 특히 DNA computing과 같은 단순한 과정의 설계를 통해 결과를 얻어야 하는 새로운 계산 모델에 커널을 적용하고자 했을 경우 큰 장벽이 된다. 본 논문에서는 넓은 마진을 목표로 하는 최적화 과정이 아닌 다른 라벨(label)의 데이터간의 경계 파악을 위한 간단한 커널 갱신 방법의 도입을 통해 분류기를 설계한다. 이 방법을 가우시안 커널에 적용시켜 본 결과, 반복을 통해 데이터의 구조를 찾아갈 수 있는 특성을 보여주며, 결국 넓은 마진의 최적화된 파라미터를 찾게 됨을 보여준다. 본 논문에서는 이 최적화 방법을 DNA 분자를 이용한 커널 생성 모델인 DNA 커널에 적용시켰을 때 잘 알려진 AML/ALL 데이터를 잘 분류해 냄을 보여준다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.6
• /
• pp.541-548
• /
• 2000

An area light source in the three dimensional space shines past a scene polygon, to generate two types of shadow volumes for each scene polygon, i.e., one with partial occlusion and the other with the complete occlusion. These are called, penumbra and umbra, respectively. In this paper, consider the problem for computing the umbra of a convex polygon from convex quadric light sources such as circles, ellipses, spheres, ellipsoids and cylinders. First, we give characteristics of the boundary surfaces of the umbra and then propose an algorithm for generating the umbra using them.

• Annual Conference of KIPS
• /
• 2003.11b
• /
• pp.911-914
• /
• 2003

The prevention of D-Dos Attack requires to install filters at As border routers. This follows that finding minimum number of filters - VC(Vertex Cover), which is NP-complete problem. So, We propose improved 'Approximate VC' which is more efficient to real AS topology using topology property. Simulation shows that our algorithm, improved 'Approximated VC' enables us to reduce 25% VC nodes in comparison with 'Approximated VC'.