• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.557-565
• /
• 2000

According to CORBA specification, there are some mechanisms for object reference management such as Naming Service and Trading service, but these mechanism cant's supply all functionalities needed fomanagement in MICS. So, We have designed and implemented additional special-purpose IPO manager. It provides load balancing service based on real-time information for IPO and fault-tolerable services with the management of redundant IPOs and also provides transparent configuration of client environment with the lists of registered IPOs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.264-272
• /
• 1998

This paper proposes a fault detection and recovery mechanism for a fault-tolerant Mini-MAP system, and provides detailed techniques for its implementation. This paper considers the fault-tolerant Mini-MAP system which has dual layer structure from the LLC sublayer down to the physical layer to cope with the faults of those layers. For a good fault detection, a redundant and hierarchical fault supervision architecture is proposed and its implementation technique for a stable detection operation is provided. Information for the fault location is provided from data reported with a fault detection and obtained by an additional network diagnosis. The faults are recovered by the stand-by sparing method applied for a dual network composed of two equivalent networks. A network switch mechanism is proposed to achieve a reliable and stable network function. A fault-tolerant Mini-MAP system is implemented by applying the proposed fault detection and recovery mechanism.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.337-343
• /
• 2017

As a shop practice, a strength estimation method for die cast parts is suggested, in which various defects such as pores can be allowed. The equivalent porosity is evaluated by combining the stiffness data from a simple elastic test at the part level during the shop practice and the theoretical stiffness data, which are defect free. A porosity equation is derived from Eshelby's inclusion theory. Then, using the Mori-Tanaka method, the porosity value is used to draw a stress-strain curve for the porous material. In this paper, the Hollomon equation is used to capture the strain hardening effect. This stress-strain curve can be used to estimate the strength of a die cast part with porous defects. An elastoplastic theoretical solution is derived for the three-point bending of a die cast beam by using the plastic hinge method as a reference solution for a part with porous defects.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.3
• /
• pp.173-180
• /
• 2001

고가용도 클러스터 시스템에서 가동되는 인터넷 기반 소프트웨어의 복잡도가 증가됨에 따라 소프트웨어의 설계, 구현, 또는 그 밖의 여러 가지 원인과 관련된 결함으로 인하여 시스템 서비스의 오동작 또는 수행 중단으로 이어지는 사례가 늘어나고 있다. 특히 대량 트랜잭션을 처리하는 인터넷 기반 컴퓨팅 소프트웨어는 빈번한 통신 두절과 데이터 유실로 인하여, 이들이 탑재된 클러스터 시스템의 결함 발생이 더욱 심각할 가능성이 높다. 본 연구는 소프트웨어 재활 결함 허용 기법을 활용하여, 별도의 추가되는 하드웨어 없이도 가용도를 개선할 수 있다는 '소프트웨서 재활 기법을 적용한 다중계 시스템 가용도 분석'에 관한 논문에서 언급된 문제점들에 대한 해결 방안을 제시하였으며, 구체적으로는 1) 주서버의 고장 발생시 여분서버로의 작업전이(switchover) 상태를 클러스터 시스템 모델링에 포함시켰으며, 2) 작업전이 상태와 재활(rejuvenation) 상태에서 머무는 시간을 지수분포 대신에 k-stage Erlangian 분포를 사용하여 확정시간(deterministic time)을 표현할 수 있도록 하였다. 즉 본 논문에서는 고가용도 cold standby 클러스터 시스템의 운영 상태에 대한 상태전이도(state transition diagram)에서, 임의의 상태에서 머무는 시간분포가 memoryless 성질을 만족하지 않아도 되는 semi-Markov 프로세스 문제를 해결하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.2
• /
• pp.56-66
• /
• 2016

Robustness is essential for model based FDI (Fault Detection and Isolation) and it is inevitable to have modeling errors and sensor signal noises during the process of FDI. This study suggests an improved method by applying NARX (Nonlinear Auto Regressive eXogenous) model and Kalman estimator in order to cope with problems caused by linear model errors and sensor signal noises in the process of fault diagnoses. Fault decision is made by the probability of the trend of gradually accumulated errors applying Fuzzy logic, which are robust to instantaneous sensor signal noises. Reliability of fault diagnosis is verified under various fault simulations.

• The KIPS Transactions:PartA
• /
• v.13A no.4 s.101
• /
• pp.289-294
• /
• 2006

Checkpointing is an effective mechanism that allows a process to resume its execution that was discontinued by a system failure without having to restart from the beginning. Especially, page-level incremental checkpointing saves only the modified pages of a process to minimize the checkpointing overhead. This means that in incremental checkpointing, the time consumed for checkpointing varies according to the amount of modified pages. Thus, the efficient interval of checkpointing must be determined on run-time of the process. In this paper, we present an efficient and adaptive page-level incremental checkpointing facility that is based on the cost analysis of process execution time. In our simulation, results show that the proposed mechanism significantly reduced the average process execution time compared with existing fixed-interval-based page-level incremental checkpointing.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.131-136
• /
• 2007

Ad hoc networks enable efficient resource aggregation in decentralized manner, and are inherently scalable and fault-tolerant since they do not depend on any centralized authority. However, lack of a centralized authority prompts many security-related challenges. Moreover, the dynamic topology change in which network nodes frequently join and leave adds a further complication in designing effective and efficient security mechanism. Security services for ad hoc networks need to be provided in a scalable and fault-tolerant manner while allowing for membership change of network nodes. In this paper, we investigate distributed certification mechanisms using a threshold cryptography in a way that the functions of a CA(Certification Authority) are distributed into the network nodes themselves and certain number of nodes jointly issue public key certificates to future joining nodes. In the process, we summarize one interesting report [5] in which the recently proposed RSA-based ad hoc signature scheme, called URSA, contains unfortunate yet serious security flaws. We then propose new scheme by fixing their security flaws.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.479-484
• /
• 2007

This paper explains the design and implementation of the FRA(Fault Recovery Agent). FRA is a system that is suitable for recovering software error for multimedia distance education based on home network environment. In terms of distributed multimedia systems, the most important catagories for quality of service are a timeless, volume, and reliability. In this paper, we discuss a method for increasing reliability through fault tolerance. This paper explains a performance analysis of an error recovery system running on distributed multimedia environment using rule-based DEVS modeling and simulation techniques. In DEVS, a system has a time base, inputs, states, outputs, and functions. The proposed method is more efficient than the other method in comparison with error ration and processing time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1201-1206
• /
• 2013

Defects that occur during the manufacturing process or operation of a wind turbine blade have a great influence on its life and safety. Typically, defects such as delamination, pore, wrinkle and matrix crack are found in a blade. In this study, the detectability of the pores, a type of defect that frequently occur during manufacturing, was examined from the full field strain distribution determined with the image correlation technique. Pore defects were artificially introduced in four-ply laminated GFRP composites with $0^{\circ}/{\pm}45^{\circ}$ fiber direction. The artificial pores were introduced in consideration of their size and location. Three different-sized pores with diameter of 1, 2 and 3 mm were located on the top and bottom surface and embedded. By applying static loads of 0-200 MPa, the strain distributions over the specimen with the pore defects were determined using image correlation technique. It was found the pores with diameter exceeding 2 mm can be detected in diameter.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.585-586
• /
• 2020

본 논문에서는 동적 웹 어플리케이션의 기능 구현에 사용되는 모듈 구현과 모듈 결합 방식에 따른 효율성은 시스템 운영을 위한 매우 중요한 요인이 된다. 사용자들 간의 인터넷 이용률이 높아지면서 웹 어플리케이션에 다양한 기능들이 추가되어 모듈간의 복잡성이 매우 높은 상태에서 정보를 제공하고 있다. 이러한 복잡성을 줄이기 위해 제시된 방법들을 검증하기 위해 만들어진 웹 어플리케이션을 통해 시뮬레이션의 결과를 제안한다. 소프트웨어 개발에 최소한의 비용으로 최대의 효율성을 내기 위해서는 각 모듈의 여러 가지의 구현 방식과 모듈 간 결합을 테스트한 결과를 MVC 패턴 방식으로 구현된 웹 어플리케이션을 통하여 확인하였다. MVC 패턴의 단점인 모델과 뷰 사이 의존성이 높은 문제를 완화하고, 유지보수성과 결함 허용성을 높이는 모듈 구현 및 통합방식의 연구를 위해 외부 모듈과 내부에서 객체로 구현된 모듈을 사용한 웹 어플리케이션의 결합도에 따른 테스트를 통해 각 모듈의 구현 및 통합 방식에 따른 장단점을 서술한다.