• Applied Microscopy
• /
• v.40 no.2
• /
• pp.65-71
• /
• 2010

Kribensis, Pelvicachromis pulcher is a teleost belonging to Cichlidae. The oogenesis was investigated by light microscope. The ovary was located between intestine and air bladder, a yellowish and ellipsoidal shape with the major axis 20mm and the minor axis 5 mm. Cytoplasm of oogonia in early stage was basophilic and many nucleoli were located at inside of nuclear membrane. In primary oocytes, yolk vesicles were distributed only in the marginal area and egg envelope was not formed on the outside of an egg. In secondary oocytes, the egg envelope was formed and yolk vesicles in the cytoplasm were increased than the earlier stage. The basophilic substance of cytoplasm was changed to acidic. Some yolk vesicles started forming small yolk mass except the surrounding nucleus. In case of matured egg, size of egg were increased. The yolk vesicles were changed to yolk mass in accordance with development. The yolk mass contained crystal-like structures. In conclusion, the oogenesis of Pelvicachromis pulcher was summarized by the increase in cell size, the formation and the accumulation of yolk, and the decrease of basophilic substance in the cytoplasm. The oogenesis of Coreoleuciscus splendidus is similar with other teleost. But there were differences in distribution of yolk vesicle and yolk mass containing cristal-like structures.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.41-53
• /
• 2016

Stability of the braced earth wall in the composite ground, which is composed of the jointed base rocks and the soil strata depends on the earth pressure acting on it. In most cases, the earth pressure is calculated by the empirical method, in which base rocks are considered as a soil strata with the shear strength parameters of base rocks. In this case the effect of the joint dips of the jointed base rocks is ignored. Therefore, the calculated earth pressure is smaller than the actual earth pressure. In this study, the magnitude and the distribution of the earth pressure acting on the braced wall in the composite ground depending on the joint dips of the base rocks and the ratio of soil strata and base rocks were experimentally studied. Two dimensional large-scale model tests were conducted in a large scale test facility (height 3.0 m, length 3.0 m and width 0.5 m) by installing 10 supports in a scale of 1/14.5. The test ground was presumed with the base rock ratio of the composite ground of 65%:35% and 50%:50% and with the joint dips for each base rock layer, $0^{\circ}$, $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$, respectively. And then finite element analyses were performed in the same condition. As results, the earth pressure on the braced wall increased as the base rock layer's joint dips became larger. And earth pressure at the rock layer increased as the rock rate became larger. The largest earth pressure was measured when the base rock rate was 50% (R50) and the rock layer's joint dips was $60^{\circ}$. Based on these results, a formular for the calculation of the earth pressure in the composite ground could be suggested. Distribution of earth pressure was idealized in a quadrangular form, in which the magnitude and the position of peak earth pressure depended on the rock ratio and the joint dips.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2007

The purpose of this study was to evaluate the effect that various concentration and application time of hydrogen peroxide had on tooth whitening and physical properties. The hydroxyapatite (HA) discs of $12mm({\Phi}){\times}1.2mm(t)$ in dimensions were made by compression $(100kg/cm^2)$ and sintering (at $1350^{\circ}C$ for 2 hours) All specimens were polished sequentially with '240 through '2000 emery paper and one side of each specimen was polished finally with $0.3{\mu}m$ alumina paste. The discs were placed in sterile whole stimulated saliva overnight at $37^{\circ}C$ in order to form an in vitro pellicle layer. Then the discs were rinsed with distilled water and soaked into staining broth at $37^{\circ}C$ for 7 days. These stained specimens were bleached with hydrogen peroxide according to the change of concentration $(3{\sim}30%)$ and application time ($3{\sim}10$ days). The specimens were analyzed with a spectrophotometer, X-ray diffractometer (XRD), scanning electron microscope (SEM), surface roughness tester, microhardness tester and biaxial flexural strength. The results of present study can be summarized as follows : 1. The bleaching effect was increased with the increased concentration and the extended application time of hydrogen peroxide. 2. The surface roughness was significantly increased from the specimen bleached with 15% hydrogen peroxide for 10 days and with 30% for 7 and 10 days respectively (p<0.05). 3. The changes of crystal phase observed by XRD between before and after bleaching weren't shown of any difference, but microporous structure of surface observed by SEM was shown of increase with the increased concentration and the extended application. 4. The biaxial flexural strength was significantly decreased from bleaching of specimen with 30% hydrogen peroxide for 7 and 10 days respectively (p<0.05) 5. Microhardness was significantly decreased from bleaching with 15% hydrogen peroxide for 10 days and with 30% for 3, 7 and 10 days respectively (p<0.05). Although the tooth bleaching effect was greater when the high concentration was applied, further in vivo experiment will be needed to prove it's safety.

• Korean Journal of Social Welfare
• /
• v.60 no.3
• /
• pp.31-58
• /
• 2008

This study examines applying the elderly poverty labor hypothesis and skill-biased technological change hypothesis to labor force participation rate(LFPR) of older males in Korea. These hypotheses have hardly been examined on the this group. The analysis is based on the data "Summary of economically active population($1965{\sim}2007$)", "Population projection($1965{\sim}2007$)", "Report on wage structure survey($1993{\sim}2005$)" and "Korea Labor and Income Panel Study($1998{\sim}2006$)". The method employed for this study is logistic regression. The main results from this analysis are summarized in five points. Firstly, Korean older males' LFPR have been increasing since 1965 when industrialization was expanding at full steam. This trend has been different from the decreasing trend of industrialized countries. The second finding is that poor older males' LFPR is, on the average, 5.2% higher than that of non-poor older males from 1998 to 2005. The third result is that the non-elderly man has been increasingly positioned at higher grade occupations, while the elderly man has been held at lower grade occupations. The fourth is that labor demand for highly educated workers has exceeded the increased labor supply of the group, while the demand for low educated workers has decreased far beyond the declined labor supply. As a result, college premium has increased from 139% in 1993 to 157.8% in 2005. The final main implication of this study is that the industrialization theory and modernization hypothesis still holds for the LFPR of Korean older males. However, the elderly affluence hypothesis of the LFPR of older males are hardly persuasive in explaining Korean phenomenon. Especially, we find that the elderly poverty is the main mechanism in determining the Korean LFPR in old ages. This supports the elderly poverty labor hypothesis presented in this study. Skill-biased technological change hypothesis partially explains the LFPR of older man. However, we believe that other factors; human capital specially high school education rather than university education and skill required in less skill biased occupations or the poverty; also have taken effect.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.18-27
• /
• 2009

Objective: The purpose of this study was to understand the differences in masseter muscle(MM) between the shifted and non-shifted sides in facial asymmetry patients, and the changes shown by MM after mandibular surgery. Methods: Pre- and post-operative CT scans were performed on 12 Class III patients with facial asymmetry who were treated by intraoral vertical ramus osteotomy and 10 subjects with normal occlusion. Using the V-works 4.0 program(Cybermed, Seoul, Korea), 3-dimensional images of the mandible, and MM were reconstructed, and evaluated. Results: In the asymmetry group, the MM angle between the shifted and non-shifted sides was only significantly different(p<0.05). Compared with normal occlusion, the asymmetry group showed a significantly smaller volume and maximum cross-sectional area in both sides of MM(p<0.05). After mandibular surgery, the angle of MM(p<0.01) and differences in angle between the shifted and non-shifted sides of MM(p<0.05) were significantly decreased. The thickness in the maximum cross-sectional area was significantly increased(p<0.01). After surgery, MM in facial asymmetry patients was similarly changed to those in the normal occlusion group except for widths. Conclusions: MM in facial asymmetry was definitely different from those in normal occlusion. However, this study suggests that MM changed symmetrically in conjunction with the mandible after proper mandibular surgery.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.100-105
• /
• 2005

$Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticles have been prepared by a sol-gel method. The structural and magnetic properties have been investigated by DTA/TGA, XRD, SEM, and $M\ddot{o}ssbauer$ spectroscopy, VSM. $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powder that was annealed at $300^{\circ}C$ has spinel structure and behaved superparamagnetically. The estimated size of superparammagnetic Ni-Zn ferrite nanoparticle is around 10 nm. The hyperfine fields at 13 K for the A and B patterns were found to be 533 and 507 kOe, respectively. The blocking temperature ($T_B$) of superparammagnetic $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle is about 250 K. The magnetic anisotropy constant and relaxation time constant of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle were calculated to be $1.6\times10^6\;ergs/cm^3$ and ${\tau}_0=5.0{\times}10^{-13}$ s, respectively. Also, Temperature increased up to $43^{\circ}C$ within 10 minutes under AC magnetic field of 7 MHz. It is considered that $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powder that was annealed at $300^{\circ}C$ is available for biomedicine application such as hyperthermia, drug delivery system and contrast agents in MRI.

• Solar Energy
• /
• v.20 no.2
• /
• pp.43-54
• /
• 2000

We prepared and characterized $Cu(In_{1-x}Ga_x)Se_2$(CIGS) films using a elemental co-evaporation method for absorbing layer of high efficiency thin film solar cells. The CIGS films deposited on a soda-lime glass exhibited low resistivity because of higher carrier concentration. Na was accumulated at the CIGS surface and the 0 and Se were also accumulated at the surface, suggesting that oxidation is a driving force of Na accumulation. The structure of CIGS film was modified or a secondary phase was formed in the Cu-poor CIGS bulk films probably due to the incorporation of Na into Cu vacancy sites. As the Ga/(In+Ga) ratio increased, the diffraction peaks of $Cu(In_{1-x}Ga_x)Se_2$ films were shifted to larger angle and splitted, and the grain size of $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films became smaller. All $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films showed the p-type conductivity regardless of the Ga/(In+Ga) ratio. Ag/n-ZnO/i-ZnO/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo solar cells were fabricated. The currently best efficiency in this study was 14.48% for $0.18cm^2$ area ($V_{oc}=581.5mV,\;J_{sc}=34.88mA$, F.F=0.714).

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.168-180
• /
• 2017

This study was performed to determine the rapid thawing method for reducing the thawing time of frozen pork loins and to examine the effects of supercooling on the microbiological, physicochemical, and sensory qualities of fresh and frozen-thawed pork during storage at -1.5, 4, and $15^{\circ}C$. Forced-air thawing at $4^{\circ}C$ was the most time-consuming process, whereas radio frequency thawing time was the shortest by dielectric heating. The supercooling storage temperature was chosen to be $-1.5^{\circ}C$ because microstructural damages were not observed in the pork sample after cooling at $-1.5^{\circ}C$ for 24 h. Fresh or frozen-thawed pork loins stored at $-1.5^{\circ}C$ had lower drip loss and total volatile base nitrogen, thiobarbituric acid-reactive substance, and Hunter b* levels than loins stored at 4 and $15^{\circ}C$. In addition, the least degree of increase in preexisting microorganisms counts of the fresh or frozen-thawed pork loin samples was obtained during supercooled storage at $-1.5^{\circ}C$. Sensory quality results of fresh and frozen-thawed pork loin samples stored at $-1.5^{\circ}C$ showed higher scores than the samples stored at 4 and $15^{\circ}C$. These data indicate that supercooling at $-1.5^{\circ}C$ in the meat processing industry would be effective for maintaining the quality of pork meats without ice crystal nucleation and formation.

• Microbiology and Biotechnology Letters
• /
• v.35 no.3
• /
• pp.196-202
• /
• 2007

Mutations in the cystathionine ${\beta}$-synthase (CBS) gene cause homocystinuria, the most frequent inherited disorder in sulfur metabolism. CBS is the unique enzyme using both heme and pyridoxal 5-phosphate (PLP) for activity. Among the reported 140 mutations, one of the most common disease-causing alterations in human CBS is G307S mutation. To investigate the pathogenic mechanism of G307S by spectroscopic methods, we engineered the full length and the truncated G247S mutation of yeast CBS that is corresponding mutation to human G307S. Yeast CBS does not contain heme and thus gives a merit to study the spectroscopic properties. The UV-visible spectra of the purified full length and the truncated G247S yeast CBSs showed the total absence of PLP in the protein. The absence of PLP in G247S mutation was also confirmed by the PLP-cyanide adduct formation experiment, which was conducted by the incubation of the purified enzyme with KCN. The adducts were detected using a circular dichroism (CD) and a spectrofluorimeter. Radio isotope activity assay of full length and truncated G247S proteins also gave no activity. Our yeast G247S mutation data suggested that G307S might make the distortion of the active site so that cofactor PLP and substrate can not fit inside the active site. Our yeast CBS study addressed the reason why the G307S mutation in human CBS makes the enzyme inactive that consequently leads to severe clinical phenotype.

• Journal of Distribution Science
• /
• v.10 no.4
• /
• pp.37-45
• /
• 2012

The popularity of courier services in Korea has made it an essential part of the country's domestic logistics industry, bolstering the growth not only of the national economy, but also the quality of people's daily lives. An effective strategy for courier companies in Korea would be to provide high-quality services to their existing target markets with the goal of maximizing customer loyalty. This study investigates structural relationships between customer loyalty and service quality as a set of factors and between customer trust and customer satisfaction. These antecedent relationships will be used to understand the "performance formation model" through service quality. In this study, service quality, as a set of factors, is considered to be the independent variable, while customer satisfaction and customer trust are both treated as intervening variables. Finally, customer loyalty is the dependent variable. Following a review of the literature, this paper's proffered hypothesis will be investigated in terms of whether the independent and intervening variables significantly affect customer loyalty. A statistical analysis of the empirical research was carried out using both SPSS 18.0 and AMOS 18.0 The results of this study's empirical analysis show three conclusions. First, among the intervening variables (customer satisfaction and customer trust), customer satisfaction is significantly correlated with customer loyalty. Customer trust, however, was shown to have little or no relationship to customer loyalty. Second, the quality of service variable seems to influence customer satisfaction, customer trust, and customer loyalty. Third, with respect to the relationship of intervening variables, customer trust affects customer satisfaction. Thus, the companies that have a competitive advantage in Korea have successfully maximized customer loyalty for their existing customers. Courier companies will need to research and study customer needs. Therefore, this research suggests that effective courier service management can be better understood through the application of the service quality performance formation model, which can enhance the quality of service provided by domestic courier services. This research is limited to investigating qualitative variables, such as the service quality factors, customer satisfaction, and customer trust. It would be helpful for future research on courier services to consider quantitative variables, such as price and weight.