• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.3
• /
• pp.95-106
• /
• 2003

This study evaluated the architectural density of urban district using airborne laser scanning(ALS) that is a method used in urban planning, water resources and disaster prevention with high interest recently. First, digital elevation model(DEM) and digital surface model(DSM) was constructed from Light detection and ranging(LiDAR). For getting the height of building, ZONALMEAN filter was used in DEM and ZONALMAJORITY filter was used in DSM. This study compared the floor from filtering with the floor from survey and got standard error, which is ${\pm}0.199$ floor. Also, through the overlay and statistical analysis of total-area layer and zone layer, we could present floor area ratio by zone. As a result of comparison with floor area ratio between airborne laser scanning data and survey data, the standard error of floor area ratio shows ${\pm}2.68%$. Therefore, we expect that airborne laser scanning data can be a very efficient source to decision makers who set up landuse plan in near future.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.80-89
• /
• 2011

In this paper, a new real time video scaling technique which preserved the contents of a movie was proposed. Because in a movie a correlation exists between consecutive frames, in this paper by determining the seam of the current frame considering the seam of the previous frame, it was proposed the real time video scaling technique without the shaking phenomenon of the contents even though the entire video is not analyzed. For this purpose, frames which have similar features in a movie are classified into a scene, and the first frame of a scene is resized by the seam carving at the static images so that it can preserve the contents of the image to the utmost. At this time, the information about the seam extracted to convert the image size is saved, and the sizes of the next frames are controlled with reference to the seam information stored in the previous frame by each frame. The proposed algorithm has the fast processing speed of the extent of being similar to a bilinear method and preserves the main content of an image to the utmost at the same time. Also because the memory usage is remarkably small compared with the existing seam carving method, the proposed algorithm is usable in the mobile terminal in which there are many memory restrictions. Computer simulation results indicate that the proposed technique provides better objective performance and subjective image quality about the real time processing and shaking phenomenon removal and contents conservation than conventional algorithms.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.90-102
• /
• 2011

Recently, the grade of users using wireless communication services which transmits and re-transmits to the signal via the broadcasting satellite have a variety. However the ships not preparing of H.264 standard devices should not received the realtime data because the broadcasting stations have transmitted the compressed video data through the satellite communication. Therefore this paper proposes H.264 to MPEG-2 transcoding for the ships using MPEG-2 devices. Proposed method improves a speed and object quality in H.264 to MPEG-2 transcoding by analysis features of macroblock modes in H.264. In the Intra mode of P-frame, it proposes new method by computing coincidence proportion after comparing of Intra mode methods of H.264 and MPEG-2. In the Inter mode, it proposes a PMV(predictive motion vector) considering movement of motion vectors in H.264 decoder. we reuses a PMV directly as like the final MV in MPEG-2 encoder and refinements the MV after coincidence ratio comparing of variable motion vectors of H.264 and these of MPEG-2. The experimental results from proposed method show a considerable reduction in processing time, as much as 70% and 67% respectively, with a small objective quality reduction in PSNR.

• Composites Research
• /
• v.28 no.4
• /
• pp.168-175
• /
• 2015

Recently, the applications of carbon fiber reinforced plastics (CFRPs) have become broader than ever when it comes to such industries as automotive, ships, aerospace and military because of their lightweight-ness and high mechanical properties. Thermosetting plastics like epoxy are frequently used as the binding matrix in CFRPs due to their high hardness, wetting characteristics and low viscosity. However, they cannot melted and remolded. For this reason, thermosetting plastic wastes have caused serious environmental problems with the production of fiber reinforced plastics. Thus, many studies have focused on the carbon fiber reinforced thermoplastics (CFRTPs) and recycling carbon fiber. In this study, recycled carbon fiber (RCF) was prepared from CFRPs using a pyrolysis method, which was employed to separate resin and carbon fiber. The degree of decomposition for epoxy resin was confirmed from thermal gravimetric analysis (TGA) and scanning electron microscope (SEM). The RCF was cut and ground to prepare a carbon fiber composite sheet (CFCS). CFCS was manufactured by applying recycled carbon fibers and various thermoplastic fibers. Various characterizations were performed, including morphological analyses of surface and cross-section, mechanical properties, and crystallization enthalpy of CFCS at different cooling conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.729-738
• /
• 2017

With the signing of the Paris Agreement, which is the new climate change agreement at the end of 2015, it will have a great impact on Korea environmental policy. The construction industry, which accounts for 42% of Korea's total $CO_2$ emissions, has been implementing various policies to improve the environmental problems. However, it is only applying passively to other projects except eco-friendly building certification. This is because most of the eco-related systems are based on building facilities. Therefore, there is a need for a new eco - friendly design evaluation model that can be widely applied not only to architecture but also to civil engineering facilities. In this study, a new model is developed based on the existing VE model, which adds new factors to evaluate the environmental friendliness, potential environmental pollution concept and environmental risk of facilities. This model is an eco-friendly design evaluation model that enables decision makers to effectively select alternative environmental criteria at the design stage. As a result of the case analysis of the block retaining wall and the alternative retaining wall, the value of the eco - friendly value of the alternative was 1.026 times higher than the original one. If this model is used at the design stage, it is expected to contribute not only to the construction of environmentally friendly facilities but also to the reduction of carbon emissions.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.110-110
• /
• 2010

2009년 7월 23일-24일 양일간의 APEC MTF 컨퍼런스는 APEC 회원 경제가 아시아-태평양지역에서 광업부문의 지속가능한 발전의 주제를 토의할 기회를 제공했다. 본 컨퍼런스는 APEC의 광업부문의 지속가능한 발전이라는 프로젝트의 중요 부분이며 컨퍼런스의 활발한 참여는 프로젝트의 성공을 증진시켰다. 지속가능한 발전에 대한 안건이 수년간 APEC의 핵심부분이었으며, 특히 광업장관(MRM)회의에 상정되어 왔다. 2004년 6월 칠레 안토파가스타의 제1차 회의에서, 광업장관들은 APEC 지역에서 광업 및 금속산업의 지속가능한 발전은 부를 창출하고, 환경사업을 창출하며, 사회적으로 책임있는 발전을 도모하며 사회를 위한 향상된 가치를 만들어낸다는데 동의했다. 초기의 action item들 중에서 지속가능한 발전에 있어서 광물 및 금속의 기여를 규명하는 것도 있었다. 광업에 있어서 지속가능한 발전에 대한 안건의 토의는 2005년 10월 한국의 경주 제2차 APEC MRM 회의에서 속계되었다. 관련된 action task는 채광 후 토지운영 뿐만 아니라 에너지 효율기술, 광업 오염 통제 기술과 같은 환경친화적인 채광기술에 대한 정보교환 및 협조를 독려하는 것이었다. 2007년 호주 퍼스의 제3차 회의에서 APEC MRM 회의는 특히 지구화의 시대에 APEC 지역 광물자원의 지속가능한 발전에 대한 긴밀한 지역적 협조에 대한 필요성을 인지하고 있다. 장관들은 역시 광업부문에서 지속가능한 발전에 대한 APEC 위상을 정립하기 위한 작업을 주도하기로 했으며 APEC 경제의 공통관심사를 UNCSD에 반영키 위한 자료제공을 하기로 결정했다. APEC 광업분야의 지속 가능한 개발에 관한 APEC MTF회의는 호주, 캐나다, 칠레, 중국, 인도네시아, 일본, 말레이시아, 파푸아 뉴기니, 페루, 필리핀, 한국, 러시아, 싱가포르, 타이완, 태국, 미국, 베트남에서 자신들의 지속 가능한 개발을 위한 활동에 관한 발표나 의견을 제시하였다. 세계 은행이나 AIM에서도 발표를 하였다. 중요한 소주제들은 다음과 같다. $\cdot$ APEC MTF가 APEC 광업분야의 지속 가능한 발전을 추구하는데 있어 적절한 포럼이라는 것 $\cdot$ 기업들이 사회적 책임(CSR)을 성실히 이행할 필요가 있다는 것 $\cdot$ 수자원과 인적자원의 부족을 다룰 필요가 있다는 것 $\cdot$ 적절한 광산 복구가 필요하다는 것이다. 한국은 "광업분야의 지속가능한 발전을 위한 환경과 광업간의 균형"이라는 프로젝트 아이디어를 제안했다. 인도네시아와 말레이시아는 한국측 프로젝트 수행의 중요성을 강조했다. 러시아 연방은 "광업에 있어 투자 활성화"라는 프로젝트 아이디어를 제안했다. 이 관점에서 MTF는 APEC 투자전문가 그룹과의 협력을 지지했으며 이 포럼간 활동을 활성화시키기 위하여 APEC 사무국에 요청했다. 이 프로젝트는 세계 광업분야의 투자를 증진시키는 최적관행 분석에 따라 제안될 것이고 수행될 것이다. 말레이시아는 광업 및 광업 산업의 지속가능한 발전지시자를 위한 역량구축 프로젝트를 제안했다. 태국은 말레이시아의 제안을 지지했으며 공동프로젝트를 제안했다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.463-469
• /
• 2016

In this paper, compressive strength and water permeability performance for two types of crack self-healing materials such as SH-PO-0 composed of mineral admixtures(expansive agent, swelling material and crystal growth agent) and SH-PO-(5, 15, 30) blended with SH-PO-0 and phosphate additive(PO) dissolving easily calcium ion, were evaluated. The test results show that the water flow of SH-PO-0 decreased steeply at the early age although compressive strength decreased about 9% at 28 days compared with OPC. The higher PO replacement ratio is, the lower compressive strength and more improved water permeability performance is, and thus, based on such results, adequate PO replacement ratio is 15%. It is also found that the self-healing performance of SH-PO-15 was quite improved at the early ages and however, the performance of SH-PO-15 is similar to one of SH-PO-0 at long-term ages, and 28 days compressive strength of SH-PO-15 decreased about 8% compared with SH-PO-0. In addition, it is confirmed from the analysis of SEM-EDS that calcium ions of SH-PO-15 were crystallized more than those of SH-PO-0.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.89-95
• /
• 2010

The chalcopyrite $Cu(In_xGa_{(1-x)})Se_2$ (CIGS) is considered to be one of the effective light-absorbing materials for thin film photovoltaic solar cells. We describe the electrodeposition of CIGS thin films in ambient laboratory conditions, and suggest the electrochemical conditions to prepare stoichiometric CIGS thin films of Ga/(In + Ga) = 0.3. In acidic solutions containing $Cu^{2+}$, $In^{3+}$, $Ga^{3+}$ and $Se^{4+}$ ions, the CIGS films of different Cu/In/Ga/Se chemical compositions were electrodeposited onto Mo/Glass substrate. The structure, morphology and chemical composition of electrodeposited CIGS films were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Energy dispersive X-ray spectroscopy (EDS), respectively.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.4
• /
• pp.97-104
• /
• 2020

One of the main challenges of electrochemical water splitting technology is to develop a high performance, low cost oxygen-evolving electrode capable of substituting a noble metal catalyst, Ir or Ru based catalyst. In this work, CoFe₂O₄ nanoparticles with sub-44 nmsize of a inverse spinel structure for oxygen evolution reaction (OER) were synthesized by the injection of KNO₃ and NaOH solution to a preheated CoSO₄ and Fe(NO₃)₃ solution. The synthesis time of CoFe₂O₄ nanoparticles was controlled to control particle and crystallite size. When the synthesis time was 6 h, CoFe₂O₄ nanoparticles had high conductivity and electrochemical surface area. The overpotential at current denstiy of 10 mA/㎠ and Tafel slope of CoFe₂O₄ (6h) were 395 mV and 52 mV/dec, respectively. In addition, the catalyst showed excellent durability for 18 hours at 10 mA/㎠.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.410-418
• /
• 2000

An in vitro study was performed to evaluate the effect of four variables on the temperature rise produced by polishing of restorations. The four variables were : restorative material, base, thickness of remaining dentin, continuous polishing or intermittent polishing. Class V cavities were cut on extracted molar and restored with composite resin, resin-modified glass ionomer cement, compomer, amalgam on the various bases (glass ionomer cement, zinc oxide eugenol cement, zinc phosphate cement) Dentin thickness under the restoration was 0.5mm, 1.5mm. Polishing was done with an aluminum oxide-coated disc. Polishing time was continuous or intermittent for up to 1 minute. Intra-pulpal temperature increased almost linearly in all cases. Amalgam produced highest temperature rises at the pulp, while the composite resin, resin-modified glass ionomer cement and compomer were not different for each other. The rate and extent of temperature rising of amalgam restoration was reduced by presence of a cement base. Zinc oxide eugenol cement bases showed the highest temperature rise, while glass ionomer cement, zinc phosphate cement were not different to the untreated tooth Thickness of remaining dentin was only significant for the amalgam restoration. Continuous polishing produced higher temperature rise than intermittent polishing.