• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.51-59
• /
• 2011

Tensile stress occurs and random crack develops in concrete pavement slab when it contracts by variation of temperature and humidity. The tensile stress decreases and the random crack is minimized by sawcutting the slab and inducing the crack with regular spacing. The random crack, joint damage, decrease of load transfer efficiency are caused by too wide joint spacing while too narrow joint spacing leads to increase of construction cost and decrease of comfort. A mechanistic-empirical joint spacing design method for the concrete pavement was developed in this study. Structurally and environmentally weakest sections were found among the sections showing good performance, and design strengths were determined by finite element analysis on the sections. The joint width for which the load transfer efficiency is suddenly lowered was determined as allowable joint with referring to existing research results. The maximum joint spacing for which the maximum tensile stress calculated by the finite element analysis did not exceed the design strength were found. And the maximum joint width expected by the maximum joint spacing were compared to the allowable joint width. The new method developed in this study was applied to two zones of Hamyang-Woolsan Expressway being designed. The same joint spacing as a test section constructed by 8.0m of joint spacing wider than usual was calculated by the design method. Very low cracking measured at 6 years after opening of the test section verified the design method developed in this study.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.120-121
• /
• 2003

과수원에서 재배되는 배는 과수원 내의 위치, 시비, 토양 등의 요인에 따라 다양한 품질을 나타내며, 당도와 숙도의 편차가 크기 때문에 과수농가에서는 경험에 의존하여 적정 숙기로 판단되는 배를 수확하고 있다. 그러나 과학적이지 못한 사실에 기초한 수확 관행은 시장유통되는 배에 대하여 소비자들의 신뢰성 저하를 초래하게 되고 소비 감소와 더불어 농가 소득 감소로 이어지게 된다. 최근, 전국의 청과물 산지유통센터에는 근적외선을 이용하여 과일 내부의 당도, 산도, 결함 등을 실시간으로 판정할 수 있는 비파괴 선별기가 보급되고 있으나 이는 수확이후의 선별.규격화 유통을 위한 것이다. 본 연구에서는 이와는 달리, 수확 이전, 즉 재배 단계에서 배의 당도와 숙도를 판정하여 수확적기를 판단할 수 있도록 나무에 매달린 배에 대하여 가시광선과 근적외선 반사스펙트럼을 측정할 수 있고 이를 이용하여 당도와 숙도가 판정가능한 휴대형 센서를 개발하였으며, 개발된 시작기를 이용하여 당도판정의 가능성을 시험하였다. 휴대형 당도판정센서는 광원과 광섬유프로브, 광검출부, 당도판정부, 전원공급부로 구성된다. 광원은 할로겐램프(6V)를 이용하였고, 광섬유프로브는 동심원 형태로서 외부의 광섬유를 통하여 광원에서 시료로 빛이 조사되게 하고, 내부의 광섬유를 통하여 광검출기로 확산반사되는 광이 전달될 수 있도록 하였다. 전원공급부는 휴대와 충전이 가능한 배터리(12V, 2AH)와 이 배터리에서 정전류가 광원으로 보내어 질 수 있도록 제작된 회로로 구성하였다. 당도 판정을 위하여 518nm에서 1046nm의 파장대역에서의 반사스펙트럼을 이용하였고, 레퍼런스로써 백색 테플론 구를 제작하여 사용하였다. 수원 농산물 도매시장에서 판매중인 2002년산 신고 배를 구매하고, 시작기를 이용하여 총 113개의 배에 대한 반사스펙트럼을 측정하였다. 다음으로 굴절당도계로 당도값을 측정하고 반사스펙트림을 이용하여 당도값을 예측하기 위한 부분최소제곱회귀(PLSR)모델을 개발하였다. 여기서 모델의 정밀도는 교차검정법을 이용하여 검증하였다. 시료 표면과 광섬유프로브와의 접촉상태 불균일, 광원의 시간에 따른 경시 변화, 과일 형상의 차이 등에 의하여 측정된 반사스펙트럼은 상당한 변이를 나타내었으므로 이를 보정하기 위하여 반사 스펙트럼은 다분산보정처리하여 이용하였다. 당도 예측용 PLSR모델 개발의 결과, 모델의 결정계수($R^2$)는 0.67, SEC는 $\pm$0.4brix.로 나타났으며, 교차검정에 의한 미지 시료의 예측에서 총 113개의 미지 시료에 대한 결정계수는 0.57, SEP는 $\pm$ 0.46brix.로 나타났으며, 이는 현장에서 충분히 활용가능할 것으로 판단되었다. 금후, 전체 시스템의 부피와 중량을 줄이고 각 부분품들의 전력소모의 최소화할 수 있도록 개선할 계획이다.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.1
• /
• pp.50-60
• /
• 2020

Estimates of project costs in the early stages of a construction project have a significant impact on the operator's decision-making in important matters, such as the site's decision or the construction period. However, it is difficult to carry out the initial stage with confidence because information such as design books and specifications is not available. In previous studies, case-based reasoning was used to predict initial construction costs, and genetic algorithms were used to calculate the weight of the inquiry phase among them. However, some say that it is difficult to perform better than the current year because existing genetic algorithms are calculated in random numbers. To overcome these limitations, correlation numbers using correlation analysis rather than random numbers are reflected in the genetic algorithm by method of local search, and weights are calculated using a hybrid genetic algorithm that combines local search and genetic algorithms. A case-based reasoning model was developed using the weights calculated and validated with the data. As a result, it was found that the hybrid GA-CBR applied with local search performed better than the existing GA-CBR.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.45-66
• /
• 2009

A number of companies are considering for merger and acquisition (M&A) as one of business strategies for their growth and survival. However, many of them do not create the synergy they had sought, and failed M&A, often result in negative outcomes in terms of productivity, market share, profitability and turnover of qualified employees. There have been numerous research studies conducted to analyze the factors that determine the success and failure of M&A, and it has been found that with the increasing dependence of many companies on information systems, post-M&A IS (information systems) integration success has a critical effect on the success of M&A. However, there have been very few studies on post-M&A IS integration success, and most have been restricted to integration of IS organizations or physical information systems. In order to conduct a comprehensive research on the factors that affect the success of post-M&A IS integration, this study surveyed preceding researches on not only information systems but also strategic management, economics, finance, HRM (human resource management) and organization management. Based on the findings, a comprehensive and integrated model of the influential factors on post-M&A IS integration has been proposed. The proposed model categorizes the factors into perspectives of M&A, strategy, organization, HRM and IS, and provides an empirical evaluation of each factor on the success of IS integration based on comparative case studies.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.91-103
• /
• 2008

In order to simulate the behavior of automated manufacturing systems, the performance of material handling systems should be measured dynamically. Multi-Agent technology could be well adapted for the development of simulator for distributed and intelligent manufacture systems. A multi-agent system is composed of one coordination agent and multiple application agents. Issues in AGVS simulator can be classified by the set-up and operating problems. Decisions on the number of vehicles, bi- or uni-directional guide-path, etc. are fallen into the set-up problem category, while deadlock tree algorithm and conflict resolution are in operating problem. In this paper, a multi-agent based deadlock-free simulator for automated guided vehicle system(AGVS) are proposed through the use of multi-agent technologies and the development of deadlock-free algorithm. In this AGVS simulator proposed, well-known Floyd algorithm is used to create AGVS Guide path, through which AGVS move. Also, AGVs avoid vehicle conflict and deadlock using check path algorithm. And Moving vehicle agents are operated in real-time control by coordination agent. AGV position is dynamically calculated based on the concept of rolling time horizon. Simulator receives and presents operating information of vehicle in AGVS Gaunt chart. The performance of the proposed algorithm and developed simulator based on multi-agent are validated through set of experiments.

• Korea journal of population studies
• /
• v.9 no.1
• /
• pp.89-99
• /
• 1986

이 연구는 우리나라에 있어서의 도시로의 인구이동과 도시매력도와의 관계를 <인지-행태>론적인 관점에서 설명하려데 그 목적이 있다. Julian Wolpert (1965)의 "장소효용접근방법"으로 체계화된 이 이론의 요지는 사람들이 이주대상지를 결정함에 있어서 그 대상지의 객과적인 매력도 보다는 자신들이 갖고 있는 정보를 토대로 주관적으로 판단한 이른바 "인지된 매력도"에 좌우된다는 점이다. 이 연구에서는 우리나라의 자료를 토대로 Wolpert의 가설을 검증하여 보았다. 인구이동의 관점에서 본 도시매력도의 구성요소를 (1) 소득수준, (2) 취업기회, (3) 교육기회, (4) 주거사정, (5) 도시시설의 질, (6) 이주시 도움을 받을 수 있는 친지의 유무, (7) 사회적 성장기회 등 7개 항목으로 분류하여 우리나라의 도시들을 객관적인 매력도와 주관적인 매력도로 계량화하였다. 객관적인 매력도는 기존의 통계자료를 지표화하여 측정하였고, 주관적인 매력도는 충청북도 주민들을 대상으로 1983년 현재 인구 10만 이상의 36개 도시에 대한 매력도 순위 설문조사를 통해 계량화하였다. 이들 매력도를 독립변수로 하고 충북으로부터 각 도시로 전출된 인구를 종속변수로 하여 통계적 분석을 한 결과 객관적인 매력도는 인구이동 현상을 55-58% 설명하였으나, 주관적인 매력도는 약 95%정도 설명하는 것으로 나타나 인구이동 의사결정이 주민들에게 인지된 주관적 매력도에 크게 의존하고 있음이 판명되었다. 따라서 학교교육이나 대중매체를 이용한 장기적인 <인포메이션 프로그램>을 개발하여 농촌생활이나 중소도시에서의 생활의 장점을 널리 계몽하여 도시의 주관적 매력도와 객관적 매력도간의 간격을 좁혀주는 정책도 매우 유용한 대도시 인구분석정책대안의 하나가 될수 있을 것이다.정책대안의 하나가 될수 있을 것이다.다. 고로 본고에서는 주사제의 처방설계및 제조(방법, 공정)에 관하여 개괄적으로 논하고자 한다.약화되어 저적면적빈도분포가 정상분포 단계에 도달되기 전에 바로 platykurtic분포로 되는 것이 아니고 leptokurtic 분포적 단계를 거친다고 본다때 시간의 경과를 따라 생성되어지는 Cyclodextrin의 함량의 변화를 추적하여 4시간전후에서 최고량이 되는 것을 볼 수 있으며 동시에 포위화합물을 형성시킬수 있을때는 그 생성률이 큰 영향을 이르킬수 있는 것을 지적할 수 있다.한 특성을 보여 식품제조, 식육연화 등 식품산업 분야에서의 활용가능성이 높을 것으로 보이며, 나아가 단백질이 갖는 식품학적 기능성을 높이는 데에도 사용할 수 있을 것으로 판단된다.를 한 후 저온 냉장차를 이용하여 유통한다면 관행 유통 구조보다 고품질의 포도를 유통시킬 수 있는 것으로 사료되며 앞으로는 완숙된 고 당도(12.0~15.0Bx)$^{\circ}$ 포도를 수확 한 즉시 예냉 처리하고 저온 유통한다면 보다 신선한 과일을 소비자에게 전달 할 수 있을 것이다.갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.573-586
• /
• 2016

In construction jobs, a combination of various kinds of machinery is used to perform earthworks at a large-scale site. Individual equipments essentially cooperate with each other on task such as excavation, load, transfer and compaction. While other area have studied cooperation system, related study in domestic construction is in poor condition. In this study, construction equipment fleet management system is developed for solving this problem and find way to improving efficiency in earthworks site. The entire concept of the fleet management system, including its components and process, has been systematically outlined in this paper. An operational methodology has also been suggested, where a number of machines, such as the excavators, trucks and compactors, are chosen and further grouped into a cluster. A case study verify fleet management system's effectiveness on performing task package by comparing existing work method with methodology in this study. Fleet management system in this study is expected to curtail fuel consumption by the reduction of working time and moving distance. Furthermore, it can be anticipated to declining carbon emission effect.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.50-62
• /
• 2016

The aim of this study was to develop scale of test taker to affect on process of selection of college. The study procedures were performed as follow : establish of study model, item generation, verification of content validity, 1st and 2nd pilot test and verification of construct validity and reliability. In order to verification of validity and reliability, 230 freshman were surveyed and the data were analyzed by mean, standard deviation, skewness. kurtosis, Pearson correlation, Verimax factor analysis and Cronbach's ${\alpha}$. As result of factor analysis, the 15 factors(61 items) that explain 68.37% of the total variance were extracted and each factors were classified by attribution as follow : Information collection-mass media(4items), college activity (3items), support and environment(4items), education(5items), Influential person on decision making(3items), education quality(4items), education service(5items), reputation(3items), accessibility(2items), personal circumstances(2items), college's mass media(5items), promotion (4items), on-line(4items), person's PR (3items), College image(10items). Cronbach's ${\alpha}$ of total items was 0.916 and Cronbach's ${\alpha}$ of each factors were showed range between 0.694~0.878. Measurement scale of this study may be utilized to collect basic data be required to establish policy strategy of local college be faced with difficulty of admission recruitment.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.156-172
• /
• 2011

The purpose of this paper is to highlight the importance of conflict management by local government by explaining a peculiar case of Namyangju city's construction project of landfill site for incineration remnants. Policy stage and internal dynamics of conflict between city and opposition group of local residents are used as major tools of case observation. From this analysis, this study finds that the conflict management effort of local government is critical to bring a success of a public policy. The local government needs to assess possible sources of conflict, and to prepare reasonable solutions through sincere communication with local residents. Also we need to reconsider the concept of administrative efficiency. Sometimes "slow" is better than "fast". Authoritative and hasty policy process may face unexpected obstacles, then consume more time to fulfill the policy goals. It means that the local government needs to spend more time for policy formulation. It also shows the importance of democratic process in reaching a public policy decision. In conclusion, this study confirms that the cooperative relationship between local government and residents, so-called governance, is the key to the success of public policy.

• Cartoon and Animation Studies
• /
• s.32
• /
• pp.289-313
• /
• 2013

According to many researches on brand management, the decision makings on brand marketing should center on the brand identity. Based on the brand management theory, Brand Identity-based OSMU Strategy has been suggested, in which the decision makings for culture content's OSMU should be focused on the brand identity of content to maximize the brand equity. In this study, the effectiveness of suggested brand identity-based OSMU strategy model is empirically studied, together with the effect on the brand equity. The study on the consumer's attitude toward the Harry Potter T-shirt with the associations of 'magic, courage and confrontation against evil' proved that consumers respond more favorably in terms of their recognition of the fit-to-content, preference and perceived quality. With this result, the positive effect of brand identity-based OSMU on consumer attitude is verified. On the other hand, the study on the effect of brand identity bearing T-shirt on brand equity did not support the hypothesis that the brand identity-based OSMU has the positive feedback effect on the brand equity of culture content. Still, while the brand equity is established through the long period of time with consumer's consistent experience on the certain culture content, the effect of brand identity-based OSMU on brand equity has a room for further discussion and research. While the ultimate goal of marketing is to create the power brand with high brand value, the further discussion on the effective culture content OSMU strategy to create a power brand is needed.