• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.50-50
• /
• 2003

본 연구에서는 행성 근접통과(Gravity Assist, Swingby, Flyby)를 이용한 행성간 탐사선의 궤도를 설계할 수 있는 알고리즘 개발을 자체적으로 수행하였다. 미 항공우주국(NASA)에서는 이를 이용한 행성간 탐사선의 궤도에 관한 연구를 이미 1950년대부터 시작하여 왔으며, 1973년 Mariner 10호가 한번에 두 행성, 금성과 수성을 탐사하는데 성공하였다. 행성간 임무에 있어서 행성 근접통과를 적절하게 이용한다면 임무 수행시 요구되는 에너지를 최소화 시킬 수 있어 발사비용의 절감효과와 함께 한번의 발사로 여러 행성의 탐사가 가능하여 임무의 효율성을 증대 시킬 수 있다. 행성 근접통과를 이용한 행성 탐사선의 궤도설계를 위해서는 근접 통과하는 행성(Flyby planet)에서의 진입속도벡터( $V_{\infty}$$^{ -}$) 및 출발속도벡터( $V_{\infty}$$^{+}$)의 크기, 근접 통과시의 비행 고도(Flyby altitude), 근접 통과 행성과의 충돌여부 분석(B-plane analysis), 최종적으로 도착하고자 하는 행성(Target planet)의 위치 등 많은 제한조건이 고려되어야 한다. 연구된 알고리즘의 결과를 미 항공우주국 (NASA)의 임무였던 Mariner 10호의 결과와 비교하여 보았으며, 우리나라가 향후 목성으로 탐사선을 보낸다고 가정하였을 경우, 행성 근접통과를 이용한 탐사선의 발사시기(Launch Window), 요구되는 발사 에너지(C3)값, 그리고 각각에 따른 궤적들을 산출하여 보았다. 이미 기술 개발을 완료한 국가들이 관련 기술의 제휴를 기피하고 있는 현 상황에서 이와 관련된 연구는 우주개발의 시대를 열고 있는 우리나라의 우주개발관련 기초 기술 분야를 위해 선행 연구되어야 할 부분이다. 기초 기술 분야를 위해 선행 연구되어야 할 부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.13-24
• /
• 2017

System buckling analysis is usually used to determine the critical buckling load in the buckling design of cable-stayed bridges. However, system buckling analysis may yield unexpectedly large effective lengths of the members subjected to a relatively small axial force. This paper proposes a new method to determine reasonable effective lengths of girder and tower members in steel cable-stayed bridges using fictitious axial forces. An improved inelastic buckling analysis with modified tangent modulus is also presented. The effective lengths of members in example bridges calculated using the proposed method are compared with those obtained using the conventional buckling analysis method. The proposed method provides much more resonable effective lengths of the members. When girder and tower members are built with HSB800 steel instead of conventional steel, the effective lengths of the members under a small axial force slightly decreases in the inelastic buckling analysis without fictitious axial forces, while the proposed method that considers fictitious axial forces provides almost no changes in such lengths.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.7-17
• /
• 2007

An analysis and design theory of an aperture-coupled cavity-fed back-to-back microstrip directional coupler is presented for the efficient and optimized design. For this purpose, an equivalent network is developed, and simple but accurate calculations of circuit element values are described. Design equations of the coupler are derived based on the equivalent circuit. In order to determine various structural design parameters, the evolutionary hybrid optimization method based on the genetic algorithm and Nelder-Mead method is invoked. As a validation check of the proposed theory and optimized design method, a 10 dB directional coupler was designed and fabricated. The measured coupling was 10.3 dB at 3 GHz, and the return loss and isolation were 31.8 dB and 30.5 dB, respectively. The directional coupler also showed very good quadrature phase characteristics. Good agreements between the measured and the design specifications fully validate the proposed network analysis and design procedure.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.82-90
• /
• 2011

Because of the development of Smart phone devices, the demands of high performance FPU(Floating-point Unit) becomes increasing. Therefore, we propose the high-speed single-/double-precision FPU design that includes an elementary add/sub unit and improved multiplier and compare and convert units. The most commonly used add/sub unit is optimized by the parallel rounding unit. The matrix operation is used in complex calculation something like a graphic calculation. We designed the Multiply-Add Fused(MAF) instead of multiplier to calculate the matrix more quickly. The branch instruction that is decided by the compare operation is very frequently used in various programs. We bypassed the result of the compare operation before all the pipeline processes ended to decrease the total execution time. And we included additional convert operations that are added in IEEE754-2008 standard. To verify our RTL designs, we chose four hundred thousand test vectors by weighted random method and simulated each unit. The FPU that was synthesized by Samsung's 45-nm low-power process satisfied the 600-MHz operation frequency. And we confirm a reduction in area by comparing the improved FPU with the existing FPU.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2009

This study was conducted to find out an alternative way of rapid and accurate analysis of forage quality. Near reflectance infrared spectroscopy (NIRS) was used to evaluate the possibility of forage analysis and collect 258 samples such as barley for whole crop silage, forage corn and sudangrass from 2002 to 2007. The samples were analyzed for CP (crude protein), CF (crude fiber), ADF (acid detergent fiber), NDF (neutral detergent fiber) and IVTD (in vitro true digestibility), and also scanned using NIRSystem with wavelength from $400{\sim}2,400nm$. Multiple linear regression was used with wet analysis data for developing the calibration model and validate unknown samples. The important index In this experiment was SEC and SEP $r^2$ for CF, CP, NDF, ADF and IVTD in calibration set were 0.70, 0.86, 0.94, 0.94 and 0.89, also 0.47, 0.39, 0.89, 0.90 and 0.61 in validation sample, respectively. The results of this experiment indicates that NIRS was reliable analytical method to assess forage quality, specially in CF, ADF and IVTD, sample should be included for respective forage samples to get accurate result. More robust calibrations can be made to cover every forage samples if added representative sample set.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.86-95
• /
• 2014

Productivity improvement of a shipbuilding company depends on how efficiently its limited resources are managed and utilized. Recently, research on modeling and simulation (M&S) to support shipyard production management system has been being under study. The production management based on M&S rejects decision making on experience, and it can establish productivity improvement method based on quantitative and specific data. In this paper, M&S is applied to the long-term plan as a part of the production planning in shipyards. To this end, the long-term plan processes and related management systems are analyzed. Based on the analysis, a simulation model and an application system using commercial simulation software are suggested. And basic structure of the suggested system is based on web technology such as Rich Internet Application, web services protocol for compatibility with existing shipyard enterprise systems. Utilizing the results of this study, it is expected that shipyard production planners can settle down work flow, in which one can establishes the production plan, simulates the plan, and analyzes the results, enabling a more reliable production plans.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.310-313
• /
• 2009

Several high nitrogen stainless steel ingots(100kg) were fabricated with changing Ni and $[N]_2$ contents by Pressurized Vacuum Induction Melting(P_VIM). After free forging process, chemical compositions, microstructure and mechanical properties were estimated. Hardness was increased with the increase of $[N]_2$ content. Furthermore, microstructure including a lot of tempering twins was observed with optical microscope. Mechanical properties were estimated as function of solution treatment temperature and cooling method(air/water) under duration time of 1 hr on sample that were fabricated with Ni content under the atmospheric $[N]_2$ pressure. At solution treatment range of $1050{\sim}1100^{\circ}C$, hardness was decreased with the increase of solution temperature and there were little discrepancy of microstructure and hardness with cooling method. Computer simulation was carried out in order to inspect pass schedule in cold rolling process. When the condition of simulation was roll speed of 2.5mpm, rolling rate $15{\sim}17%$ per pass, it was ascertained that the formation such as deformation by sticking and lamellar sliver etc. was restricted from a simulation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.41-47
• /
• 2015

To determine the accurate height, it should be considered geometric height difference obtained by levelling as well as the physical height difference what so called orthometric correction. The orthometric correction amount is small enough to ignore at flatland but the amount is big at high mountains, so it should be considered to obtain accurate height at high mountains. But the calculation process is difficult and complex, not easy to calculate. So, to make the process easy using a user-friendly visual, a orthometric correction calculation program Ortho-Calc. v1.0 was developed in this study. This program was adopted the algorithm of Nassar and Hwang & Hsiao, and Strang Van Hees and it could be to selectivily calculate the correction amount. The inspection result exhibited high accuracy with the standard deviation of 0.024mm by the comparison of previous study. Therefore, This program Ortho-Calc. v1.0 developed in this study, will contribute orthometric correction calculation quickly and easily. And, if this program is widely popular, it could be expected to make a contribution the Benchmark's official height renewal using orthometric correction.

• Journal of the Korean association of regional geographers
• /
• v.21 no.2
• /
• pp.379-393
• /
• 2015

The fire damage has been increased as the frequency of fire incidence decreases with increasing in death and economic loss. Local governments are dependent on the activities of fire-fighters with crude preparedness and prevention for fire incidence. Most of researches on fire safety have focused on descriptive statistics which show general trends in fire incidence and condition. Here we tried to make a mutual causal model for fire damage, to make three big hypotheses with laying three small hypotheses under each big hypothesis. Five years statistics from public domains in the form of hardcopy or softcopy were collected and fifteen independent variables were selected to explain the number of death, the number of fire incidence and the amount of economic loss from fire incidence. The significances of statistics are different among the regional characteristics. The hypotheses were partially rejected and the meanings of rejected factors will refresh the tentative prejudice. It is necessary to revise the principle that the number of population and size of area are regarded as the most important criteria to allocate resources for fire control and to have the criteria flexible with results of our research such as the number of the weak to fire disaster.

• Management & Information Systems Review
• /
• v.39 no.3
• /
• pp.83-98
• /
• 2020

This study analyzes how investors' irrational behavior (or pessimistic sentiment) affects stock market returns and investors' market activity using mass media that delivered public information from January 1998 to December 2012 as a sample. According to pessimistic investor theory, investor pessimism leads to downward pressure on the price of equity capital, thereby making market sentiment pessimistic and lowering market yields. It also shows that investor pessimism increases transaction costs in the market, which in turn dampens investors' trading activities. In other words, pessimistic reporting on public information disseminated by mass media induces investors to act irrationally, eventually having a direct impact on the stock market. This study conducted an empirical analysis of the existing theoretical and empirical studies using domestic mass media as a sample. First, the study revealed a negative correlation between pessimistic reporting and returns as well as excess returns, while it did not show statistically significant results. Second, evidence has been suggested that pessimistic sentiment in the stock market has a negative impact on future pessimistic reporting by mass media. Third, the analysis of the impact of pessimistic reporting on investors' market activity using proxy variables for various market activities found that pessimism dampens market activity, while it did not show statistically significant results. It is assumed that low statistical significance is due to the fact that sample collection was carried out on a monthly basis. While the results of the study have low statistical significance, statistical signs support predictions of the theory.