• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.47-50
• /
• 2006

In the aeroacoustic application of computational fluid dynamics, the physical phenomena like the crackle in the unsteady compressible jets should be based on very time-accurate numerical solution. The accuracy of the present numerical scheme is extended to the fifth order, using the WENO filter to the sixth-order central difference computation. However, the computational capacity is very restricted by the environment of computational power, so therefore the quadrilateral adaptive grids technique is introduced for this high-order accuracy scheme. The first problem is the multi-dimensional interpolation between fine and coarse grids. Some general benchmark problems are solved to show the effectiveness of this method.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.525-533
• /
• 2022

We propose an effective method for suppressing both side and grating lobes by applying 2-dimensional Fourier Transform to the received channel data during the receive focusing process of an ultrasound imaging system. When the signal from the image point is focused, the channel signals have the same DC value across the channels. However, even after echoes from outside an imaging point are focused, they are manifested as having different spatial frequencies depending on their incident angles. Therefore, after the receive focusing delay time is applied, 2-D Fourier Transform is performed on the time-channel data to separate the DC component and other frequency components in the spectral domain, and the weighting value is defined using the ratio of the two values. The side lobe and grating lobe were suppressed by multiplying the ultrasound image by a weighting value. Ultrasound images with a frequency of 5 MHz were simulated in a 64-channel linear array. The grating lobe appearing in the ultrasound image was completely removed by applying the proposed method. In addition, the side lobe was reduced and the lateral resolution was greatly increased. Results of computer simulation on a human organ mimicking image show that the proposed method can aid in better lesion diagnosis by increasing the image contrast.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.203-203
• /
• 2020

동해안에 위치한 영동지역은 산지로 둘러싸여 있어 지형적인 여건으로 지상강우관측망의 밀도가 낮으며, 지상관측소의 관측한계를 보완하기 위해 사용되고 있는 기존 대형 레이더는 지형 차폐로 인해 영동지역에서는 정확한 강우정보를 관측하기 어렵다. 강우정보는 홍수예측을 위해 필수적인 정보이므로, 집중호우와 태풍으로 인한 홍수재해가 빈번히 발생하는 영동지역에서는 관측공백의 해소가 필요하다. 이를 위해 환경부에서는 동해안 지역에 2기의 전파강수관측소를 설치, 운영 중에 있다. 해당 관측소 자료는 30km 관측반경 범위 내에서 수 백 미터 이하의 격자 강우자료를 생산할 수 있는 장점이 있다. 본 연구에서는 전파강수관측소의 자료를 강우 및 홍수 재해정보 생산에 활용하고자 한다. 대상지역은 영동지역에 위치한 삼척오십천으로 해당 지역은 친수적으로 조성되어 강우로 인한 시민의 인명피해가 위험이 존재하는 곳이다. 본 연구에서는 새로 설치된 삼척 전파강수관측소로 관측된 자료를 이용하여 고해상도 격자 및 유역평균강우정보를 생산하고, 지역특성을 반영하여 강우정보 기반으로 하천홍수 위험을 판단할 수 있는 하천흐름계산도표를 개발하여 평가하고자 한다. 생산된 고해상도 격자 강우자료는 70m 격자 해상도를 갖으며, 분포형 비차등위상차를 이용하여 추정된 강우정보이다. 유역평균강우는 삼척오십천 유역과 삼척시 동단위 행정구역별로 산출된다. 또한 하천흐름계산도표는 삼척오십천 유역의 현장답사를 통해 시민의 접근성, 하천수위 급상승으로 인한 피해가능성을 고려하여 6개 지점을 선정하여 개발하고, 전파강수관측소 관측강우정보를 활용하여 홍수예측정보로의 적절성을 평가한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.72-83
• /
• 2018

In this study, a series of CFD analyses were carried out for a hydrogen rocket combustor with a single shear coaxial injector. A hybrid RANS/LES approach was used for the turbulent combustion analysis with a two-dimensional axisymmetric configuration. Three reaction mechanisms, three spatial discretization methods, and three levels of grid resolution were compared to determine an appropriate CFD approach. The performance of the CFD prediction were investigated by comparing the wall heat flux with experimental data. Investigation of the flow field results provides an insight into the characteristics of the turbulent reacting flow of a rocket combustor with a shear coaxial injector.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.316-320
• /
• 2002

폭풍해일이나 파랑에 대한 보다 정확한 예측을 위해서는 해상에서의 바람장에 대한 정확한 추산이 선행되어야 하며, 특히 해상ㆍ연안재해를 유발시키는 최대풍이 주로 태풍상황에서 발생되기 때문에 이에 대한 정확한 예측이 매우 중요하다. 태풍은 일반적인 온대성 저기압이나 고기압과는 달리 그 중심부근에서 기압과 바람의 시공간적 변화가 크고 태풍의 중심이 빠른 속도로 이동되기 때문에 일반적인 기상자료 분석에 의해 산출된 바람장은 해양모델에서 요구되는 상세한 변화를 나타내지 못하고, 특히 실제 관측된 기상자료가 전무한 해상으로 태풍이 이동했을 경우에는 일기도 격자점 상의 기압으로 해상풍을 구하는 것은 큰 오차를 유발한다(해양수산부, 2001). (중략)

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.4
• /
• pp.270-279
• /
• 2017

Regional assessment of crop productivity using a gridded simulation approach could aid policy making and crop management. Still, little effort has been made to develop the systems that allows gridded simulations of crop growth using ORYZA 2000 model, which has been used for predicting rice yield in Korea. The objectives of this study were to develop a series of data processing modules for creating input data files, running the crop model, and aggregating output files in a region of interest using gridded data files. These modules were implemented using C++ and R to make the best use of the features provided by these programming languages. In a case study, 13000 input files in a plain text format were prepared using daily gridded weather data that had spatial resolution of 1km and 12.5 km for the period of 2001-2010. Using the text files as inputs to ORYZA2000 model, crop yield simulations were performed for each grid cell using a scenario of crop management practices. After output files were created for grid cells that represent a paddy rice field in South Korea, each output file was aggregated into an output file in the netCDF format. It was found that the spatial pattern of crop yield was relatively similar to actual distribution of yields in Korea, although there were biases of crop yield depending on regions. It seemed that those differences resulted from uncertainties incurred in input data, e.g., transplanting date, cultivar in an area, as well as weather data. Our results indicated that a set of tools developed in this study would be useful for gridded simulation of different crop models. In the further study, it would be worthwhile to take into account compatibility to a modeling interface library for integrated simulation of an agricultural ecosystem.

• Journal of the Korean Geographical Society
• /
• v.44 no.2
• /
• pp.122-145
• /
• 2009

Terrain parameters calculated from digital elevation models (DEM) have become increasingly important in current spatially distributed models of earth surface processes. This paper investigated how the ability of upslope area for predicting the spatial distribution of soil properties varies depending on the selection of spatial resolutions of DEM and algorithms. Four soil attributes from eight soil-terrain data sets collected from different environments were used. Five different methods of calculating upslope area were first compared for their dependency on different grid sizes of DEM. Multiple flow algorithms produced the highest correlation coefficients for most soil attributes and the lowest variations amongst different DEM resolutions and soil attributes. The high correlation coefficient remained unchanged at resolutions from 15 m to 50 m. Considering decreasing topographical details with increasing grid size, we suggest that the size of 15-30 m may be most suitable for soil-landscape analysis purposes in our study areas.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.88-97
• /
• 2011

We present a method for modelling the terrain response of gravity gradiometry surveys utilising an adaptive quadtree mesh discretization. The data- and terrain-dependent method is tailored to provide rapid and accurate terrain corrections for draped and barometric airborne surveys. The surface used in the modelling of the terrain effect for each datum is discretized automatically to the largest cell size that will yield the desired accuracy, resulting in much faster modelling than full-resolution calculations. The largest cell sizes within the model occur in areas of minimal terrain variation and at large distances away from the datum location. We show synthetic and field examples for proof of concept. In the presented field example, the adaptive quadtree method reduces the computational cost by performing 351 times fewer calculations than the full model would require while retaining an accuracy of one E$\"{o}$tv$\"{o}$s for the gradient data. The method is also used for the terrain correction of the gravity field and performed 310 times faster compared with a calculation of the full digital elevation model.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.504-505
• /
• 2003

국지규모의 기상해석을 위한 기존의 방법은 중규모 모델로부터 down-nesting에 의한 방법으로 모델의 해상도를 향상시켜 기상장을 해석하는 것이 일반적이다(Clark and Farley, 1984). 그러나, 이 방법은 단지 물리적인 격자구조만을 향상시킨 것으로 근본적인 모델 내부 구조의 향상을 가져온 것은 아니다. 따라서, 다양한 토지 피복이 혼재해 있는 도심지를 대상으로 하는 고해상도의 국지기상 모델에 대하여 계산시간과 정확성을 고려한 효율적인 지표면 열수지 모델의 구축이 요구되고 있다. (중략)

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.35-40
• /
• 2011

While high-definition precipitation maps with a 270 m spatial resolution are available for South Korea, there is little information on geospatial availability of precipitation water for the famine - plagued North Korea. The restricted data access and sparse observations prohibit application of the widely used PRISM (Parameter-elevation Regressions on Independent Slopes Model) to North Korea for fine-resolution mapping of precipitation. A hybrid method which complements the PRISM grid with a sub-grid scale elevation function is suggested to estimate precipitation for remote areas with little data such as North Korea. The fine scale elevation - precipitation regressions for four sloping aspects were derived from 546 observation points in South Korea. A 'virtual' elevation surface at a 270 m grid spacing was generated by inverse distance weighed averaging of the station elevations of 78 KMA (Korea Meteorological Administration) synoptic stations. A 'real' elevation surface made up from both 78 synoptic and 468 automated weather stations (AWS) was also generated and subtracted from the virtual surface to get elevation difference at each point. The same procedure was done for monthly precipitation to get the precipitation difference at each point. A regression analysis was applied to derive the aspect - specific coefficient of precipitation change with a unit increase in elevation. The elevation difference between 'virtual' and 'real' surface was calculated for each 270m grid points across North Korea and the regression coefficients were applied to obtain the precipitation corrections for the PRISM grid. The correction terms are now added to the PRISM generated low resolution (~2.4 km) precipitation map to produce the 270 m high resolution map compatible with those available for South Korea. According to the final product, the spatial average precipitation for entire territory of North Korea is 1,196 mm for a climatological normal year (1971-2000) with standard deviation of 298 mm.