• Applied Microscopy
• /
• v.27 no.1
• /
• pp.101-109
• /
• 1997

The nonstoichiometric ordering of Mg and Nb cations in undoped and La-doped lead magnesium niobate solid solutions has been investigated by means of high-resolution transmission electron microscopy and computer image simulation. High-resolution lattice images were obtained under various microscope imaging conditions and objective apertures. Computer image simulations were performed for a wide range of sample thickness, defocusing value, and long-range order parameter. The simulated images revealed that the lattice images of the ordered regions were predominantly dependent on the long-range order parameter. From the comparisons of the experimental and simulated images for the ordered regions, the long-range order parameter approximately ranged 0.2 to 0 7. It was also found that the ordered structure has a $(NH_4)_3-FeF_6$ structure, which consists of alternating Mg- and Nb-preferred sublattices along the (111) directions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.74-86
• /
• 2021

The composite lattice structure is a structure that supports the required load with the minimum weight and thickness. Composite lattice structure is manufactured by the filament winding process using impregnating high-strength carbon fiber with an epoxy resin. Filament winding process can laminate and manufacture only structurally necessary parts, composite lattice structure can be applied to aircraft fuselages, satellite and launch vehicles, and guided weapons to maximize weight reduction. In this paper, the development and evaluation of the composite lattice structure corresponding to the entire process from design, analysis, fabrication, and evaluation of large-scale cylindrical and conical composites lattice structure were performed. To be applicable to actual projectiles and guided weapons, we developed a cylindrical lattice structure with a diameter of 2,600 mm and a length of 2,000 mm, and a conical lattice structure with an upper diameter of 1,300 mm, a lower diameter of 2,500 mm, and a length of 900 mm. The performance of the developed composite lattice structure was evaluated through a load test.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.2 s.13
• /
• pp.71-76
• /
• 2004

To investigate the inundation of tsunamis in the vicinity of a circular island, a numerical model has been developed based on quadtree grids. The governing equations of the model are the nonlinear shallow-water equations. The governing equations are discretized explicitly by using a finite difference leap-frog scheme on adaptive hierarchical quadtree grids. The quadtree grids are generated around a circular island where refined with rectangular or circular domain. Obtained numerical results have been verified by comparing to available laboratory measurements of run-up heights. A good agreement has been achieved.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.705-713
• /
• 2003

To investigate the run-up heights of nearshore tsunamis in the vicinity of a circular island, a numerical model has been developed based on quadtree grids. The governing equations of the model are the nonlinear shallow-water equations. The governing equations are discretized explicitly by using a finite difference leap-frog scheme on adaptive hierarchical quadtree grids. The quadtree grids are generated around a circular island where refined with rectangular or circular domain. Obtained numerical results have been verified by comparing to available laboratory measurements. A good agreement has been achieved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.95-95
• /
• 1999

격자부정합한 반도체 양자점은 광전소자 분야의 활용가능성으로 인하여 많은 연구가 진행되고 있다. 특히 반도체 레이저 분야에서는 양자우물 레이저에 비하여 낮은 문턱전류 밀도, 높은 이득, 높은 양자효율, 그리고 극한 물성 등의 장점을 가지고 있다. 격자부정합한 구조로 양자점을 형성시키는 대표적인 물질이 InAs이다. InAs(격자상수 6.058 $\AA$)는 GaAs(격자상수 5.653 $\AA$)와 약 7%의 격자부정합을 가지고 잇기 때문에 GaAs 기판위에서 Stranski-Krastanov-like한 성장모드를 가지게 되고, 그로 인하여 자연적으로 양자점이 형성되게 된다. 3차원적으로 양자화된 특성을 가지는 InAs 양자점은 기저준위의 실온연속발진이 보고 되고 있으나 그 특성은 이론적으로 예측한 것과는 많이 다른 양상을 보이고 있다. 이것의 주된 원인으로는 양자점 크기 및 조성의 균일화, 그리고 양자점 크기 및 밀도의 최적호가 아직까지 이루어지고 있지 못하기 때문이다. 따라서 정밀하게 양자점을 제어하는 기술이 매우 중요하다. 이에 본 연구에서는 분자선 에피택시(MBE)방법으로 GaAs(100) 기판위에 InAs 양자점을 크기에 따라 형성시키고, 양자점의 성장 형상을 AFM으로, 그리고 분광학적 특성을 Photoluminescence로 측정하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.934-940
• /
• 1991

A modified quantizing method is introduced to teach single layer learning algorithm, which is implemented optically. The proposed optical system consists of input masks, holographic diffraction grating. LCD and CCD camera. The 2 dimensional interconnections between input neurons and output neurons are realized using holographic phase grating, which is fabricated for equal intensity distribution of diffraction orders. The two gray levels of LCD act as binary weights for each interconnection. The weights are compensated according to the learning algorithm in which the amount of weights to be compensated is determined by comparing the output patterns with target patterns. The learning process is iterated until the predetermined conditions are satisfied. Optical experiments are performed for two learning rates, 0.5 and 0.9 and the experimental results show that the proposed system is useful for optical neural networks.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.45-45
• /
• 2015

고전전인 천수방정식을 적용한 도시침수 해석모형에서 건물의 영향을 고려한 정확한 해석을 수행하기 위해서는 고해상도 격자가 요구되며 이는 계산시간의 증가가 야기된다. 고전 천수방정식을 적용한 도시침수해석 모형의 이러한 문제점을 극복하기 위해서 본 연구에서는 도시지역에 존재하는 건물 체적에 레이놀즈 이송이론을 적용한 수정 천수방정식을 제안하고, 제안 천수방정식을 이용한 효율적인 2차원 도시침수해석 모형을 개발하였다. 도시지역의 침수 모델링을 위해 고전 천수방정식은 건물을 고려하기 위해 고해상도 격자를 사용하는 것과 달리 수정 천수방정식은 건물의 영향을 매개변수화함으로서 저해상도 격자의 사용에도 고전 천수방정식과 유사한 정확도를 얻을수 있다. 건물의 영향을 매개변수화하기 위해서는 건물로 인한 저류와 흐름방향의 변화를 지배방정식이 고려할 수 있도록 수정하였다. 즉. 수정 천수 방정식은 고전 천수방정식을 기본으로 하여 건물의 저류영향을 고려하기 위해 각 계산격자에 적용되는 체적 매개변수와 건물의 흐름방향을 고려하기 위해 흐름방향과 직각방향에 위치한 선분(격자를 구성하고 있는 경계선)에 적용되는 면적 매개변수가 추가된다. 수정 천수방정식을 검증하기 위해 개발모형을 건물이 균일하게 위치한 실험하도와 비균일하게 위치한 실험하도에 적용하고 그 결과를 고전 천수방정식을 사용한 계산결과 및 계산시간과 비교함으로서 개발모형의 정확성과 효율성을 검증하였다.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.53-58
• /
• 2017

This paper presents the design and fabrication of a planar nano-diffraction grating for an integrated miniature spectrometer module. The proposed planar nano-diffraction grating consists of nonuniform periods, to focus the reflected beams from the grating's surface, and an asymmetrical V-shaped groove profile, to provide uniform diffraction efficiency in the wavelength range from 400 to 650 nm. Also, to fabricate the nano-diffraction grating using low-cost UV-NIL technology, we analyzed the FT-IR spectrum of a uvcurable resin and optimized the conditions for the UV curing process. Then, we precisely fabricated the polymeric nano-diffraction grating within 5 nm in dimensional accuracy. The integrated spectrometer module using the fabricated polymeric planar nano-diffraction grating provides spectral resolution of 5 nm and spectral bandwidth of 250 nm. Our integrated spectrometer module using a polymeric planar nano-diffraction grating serves as a quick and easy solution for many spectrometric applications.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.192-197
• /
• 2017

Typical materials including concrete behaves with positive poisson's ratio when external force is applied. However, it is also available to manufacture a grating system which has negative poisson's ratio(Auxetic). In this study, double arrow type 2-D auxetic mesh was manufactured and mechanical behaviors were observed. Also, direct tensile tests of cementitious composites reinforced by auxetic mesh were performed and the results were compared with composites reinforced by typical mesh. The results showed that auxetic mesh more effectively restrained the deformation(shortening) of cementitious composites perpendicular to the load direction comparing with typical mesh.

• Journal of Korea Water Resources Association
• /
• v.41 no.11
• /
• pp.1123-1133
• /
• 2008

It needs to conceptualize watershed with triangular or rectangular elements and to analyze the changes in hydrological components of each element for distributed modeling of rainfall-runoff process. This study is the network analysis of watershed grid for flow routing occurred in each element when analyzing rainfall-runoff process by one-dimensional kinematic wave equation. Single flow direction from D8-method(deterministic eight-neighbors method) is used, and the information of flow direction and flow accumulation are used to determine the computation order of each element. The application theory of finite volume method is suggested for each flow direction pattern between elements, and it is applied it to calculate the flow of each grid. Network analysis method from this study is applied to GRM(Grid based Rainfall-runoff Model) which is physically based distributed rainfall-runoff model, and the results from simplified hypothetical watersheds are compared with $Vflo^{TM}$ to examine the reasonability of the method. It is applied to Jungrangcheon watershed in Han river for verification, and examination of the applicability to real site. The results from Jungrangcheon watershed show good agreement with measured hydrographs, and the application of the network analysis method to real site is proper.