• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.99-107
• /
• 2003

In a winding process, important control specifications include regulation of web tension and velocity. In this research, an adaptive controller has been developed for controlling web tension and velocity in winding processes. For the controller design, the linear quadratic regulator theory has been adopted and a gain-scheduling scheme has been incorporated. A prototype winding system has been constructed, and the controller has been implemented in a real-time PC-based environment. The performance of the closed loop system has been evaluated via simulation and experiments, and it was observed that both the web tension and velocity could be regulated within a small tolerance.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.592-600
• /
• 2010

The problem of motion control for AUV (Autonomous Underwater Vehicles) is addressed. The utilization of such robotic vehicles has gained an increasing importance in many marine activities. In this paper the objective is to describe how to design and apply FGS (Fuzzy Gain Scheduling) PD (Proportional Derivative) controller for an AUV (Autonomous Underwater Vehicle) to control the yaw and depth of the vehicle by keeping the path of the navigation to a desired point, and/or changing the path according to a set point.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.567-573
• /
• 2001

A real-time HVAC system is proposed which implements real-time control of thermal environment for virtual reality. It consists of a pair of hot and cold loops that serve as thermal reservoirs, and a mixing box to mix hot and cold air streams flowing if from loops. Their flow rates are controlled in real-time to meet a set temperature and flow rate. A cascade control algorithm along with gain scheduling is applied to the system and test results shows that the closed-loop response approached set values within 3 to 4 seconds.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.48-59
• /
• 2011

This paper presents a new gain scheduling speed controller of permanent magnet synchronous generators(PMSG) for MW-class direct-driven wind turbine systems. The proposed gain scheduling speed controller performs the speed tracking at more than one operating point, and the first-order torque observer estimates the turbine torque which is needed to precisely control the speed of PMSG. The proposed speed controller verifies that the PMSG can successfully follow the reference speed which is determined via the maximum power point tracking(MPPT) control and pitch control under turbulent wind conditions. The proposed speed control algorithm is simulated using Simulink and its performance is confirmed through comparison with the results by PI control method.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.53-64
• /
• 2001

The gain-scheduling control technique is vary useful in the control problem incorporating time varying parameters which can be measured in real time. Based on these facts, in this paper the sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But, in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying inertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we assume that an plant parameter is varying and apply the gain-scheduling control technique design the anti-swing motion control system for the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the simulation result shows that the proposed control strategy is shown to be useful to the case of time-varying system and, robust to disturbances like winds and initial sway motion.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.839-845
• /
• 2013

A CSTR (Continuous Stirred Tank Reactor) is a highly nonlinear process with varying parameters during operation. Therefore, tuning of the controller and determining the transition policy of controller parameters are required to guarantee the best performance of the CSTR for overall operating regions. In this paper, a methodology employing the 2DOF (Two-Degree-of-Freedom) PID controller, the anti-windup technique and a fuzzy gain scheduler is presented for the temperature control of the CSTR. First, both a local model and an EA (Evolutionary Algorithm) are used to tune the optimal controller parameters at each operating region by minimizing the IAE (Integral of Absolute Error). Then, a set of controller parameters are expressed as functions of the gain scheduling variable. Those functions are implemented using a set of "if-then" fuzzy rules, which is of Sugeno's form. Simulation works for reference tracking, disturbance rejecting and noise rejecting performances show the feasibility of using the proposed method.

• 한국항공우주학회지
• /
• 제38권12호
• /
• pp.1170-1176
• /
• 2010

본 연구는 적응제어기법을 이용한 무인항공기이 피치 자세 기동에 대한 연구 내용을 소개한다. 모델기반적응제어(Model Reference Adaptive Control)을 이용하여 피치 자세각과 엘리베이터 입력 사이의 피드백 선형화 과정에서 발생하는 불확실성을 처리하였다. 모델 불활실성 파라미터는 피드백 제어기가 작동하는 중에 적응법칙을 이용하여 추정할 수 있도록 설계 되었다. 안정화 제어기에 의해 달성되는 최종 피치 자세각에 대한 분석을 통해 폐루프 시스템의 특성을 파악할 수 있도록 하였다. 제안된 제어 기법은 기존 제어기에서 주로 채택하고 있는 선형화나 게인 스케쥴링등의 과정이 필요하지 않아 상당한 모델 오차가 존재하는 상황에서 무인항공기의 고기동 피치 제어기 설계에 도움을 줄 것으로 생각한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 추계학술발표대회
• /
• pp.290-293
• /
• 2014

모바일 디바이스의 보급으로 사람들의 생활에 많은 변화를 가져왔으며, 이러한 변화에 따라 점차 수요에 따른 모바일 콘텐츠 시장 또한 확산 되었다. 사람들의 수요에 의해 모바일 애플리케이션은 문서작성, 게임, 사진, 은행 업무, 영화, 벨소리 뿐 아니라 HD 비디오 재생, 스트리밍 AV 서비스 등 하드웨어적 고성능을 요구하는 애플리케이션까지 등장하게 되었다. 이러한 추세에 더불어 모바일 디바이스는 멀티코어의 성능에 이르는 디바이스까지 출시 되었다. 하지만 멀티코어의 효율성은 스케쥴러가 코어에 작업을 할당하는 방법에 따라 달라진다. 이종 멀티 코어 플랫폼에서 애플리케이션의 실행 시간은 실행되는 코어에 의존한다. 본 논문에서는 프로파일에 의해 각 태스크의 실행 시간을 분석하여 태스크 스케쥴링 기법을 제안한다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1997년도 춘계학술대회 발표논문집
• /
• pp.235-246
• /
• 1997

Hybrid fuzzy gain scheduling controller is composed of a PD control and a fuzzy control for taking the advantage of each scheme. The key structure of the hybrid fuzzy gain scheduling control scheme is so called a switch which calculates weighting values between the fuzzy controller and the PD controller. However, due to the requirement of the switch , the hybrid fuzzy gain scheduling control scheme needs extra fuzzy logic processing, thus the structure is complicated. and requires more calculation time. To eliminate the drawbacks, a new hybrid fuzzy gain scheduling control scheme is proposed in this paper. In the proposed scheme, the membership function, for calculating of weithting value, and the input and output membership functions are combined. Thus the proposed hybrid scheme does not require switch for calculation of weighting value, and as a result, the calculation time is faster and the structure is more simple than the existing hybrid controller. Computer simulation results for an inverted pendulum model under Pole-Placement PID controller, fuzzy gain scheduling controller,existing hybrid controller , and proposed hybrid controller are compared to demonstrate the good property of the proposed hybrid controller.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.318-324
• /
• 2014

Recent years have witnessed a growing demand for a wide variety of high-performance industrial robots. In this paper, for accurate gain tuning of a 6-axis articulated industrial robot with reduced noise, a program routine for a dynamic signal analyzer (DSA) using the frequency response method will be programmed using $LabVIEW^{(R)}$. Then, robot transfer functions can be obtained experimentally using the frequency response method with the DSA program. Data from the robot transfer functions are transformed into Bode plots, based on which an optimal gain tuning will be executed. Gain tuning can enhance the response quality of the output signal for a given input signal during real-time control of the robot. The effectiveness of our proposed technique will be verified by implementation with a (lab-manufactured) 6-axis articulated industrial robot (hereinafter called "RS2") and comparison with the zero position gain tuning, as well as other positions.