• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.213-218
• /
• 2008

This paper describes hardware-based high speed multimedia data reassembly processor for remote multimedia Set-Top-Box(MSTB) of interactive satellite multimedia communication system. The conventional multimedia data reassembly scheme is based on software processing of MSTB. As increasing of transmission rate for multimedia data services, the CPU load of remote MSTB is increased and reassembly performance of MSTB is limited. To provide high speed multimedia data service to end user, we proposed hardware based high speed multimedia data reassembly processor. It is implemented by using an FPGA, a PCI interface chip, and RAMs. And it is integrated in MSTB and tested. It has been confirmed to meet required all functions and processing rate up to 116Mbps.

• Journal of KIISE:Software and Applications
• /
• v.33 no.8
• /
• pp.681-691
• /
• 2006

Clustering is one of widely used methods for grouping thousands of genes by their similarities of expression levels, so that it helps to analyze gene expression profiles. This method has been used for identifying the functions of genes. Fuzzy clustering method, which is one category of clustering, assigns one sample to multiple groups according to their degrees of membership. This method is more appropriate for analyzing gene expression profiles because single gene might involve multiple genetic functions. Clustering methods, however, have the problems that they are sensitive to initialization and can be trapped into local optima. To solve these problems, this paper proposes an evolutionary fuzzy clustering method, where adaptive a-cut based evaluation is used for the fitness evaluation to apply different criteria considering the characteristics of datasets to overcome the limitation of Bayesian validation method that applies the same criterion to all datasets. We have conducted experiments with SRBCT and yeast cell-cycle datasets and analyzed the results to confirm the usefulness of the proposed method.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.119-127
• /
• 2020

This study numerically investigated a structural behavior subjected to consecutive explosions. To this end, a small scale one-way reinforced slab (RC) with fixed-fixed boundary condition was considered as the target structure, and a commercial software, LS-DYNA, was utilized for finite element (FE) analysis. Prior to performing FE analysis, preliminary tests were carried out to verification of a computational model for the one-way RC slab. In the numerical simulation, identical blast loads were consecutively applied to the structure, and cumulative damage assessment were carried out based on its maximum dynamic displacements. As a result of the numerical simulation, it was found that maximum displacements considering permanent deformation due to a prior explosion were almost linearly increased in every explosion until the hazardous damage threshold.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.78-85
• /
• 2011

In vehicle ad-hoc network (VANET) environments, traffic related information such as accident information, emergency information and real time traffic condition have to be delivered to on-board-unit (OBU) or/and road-side-equipment (RSE) for preventing traffic accidents in advance. In this paper, we introduce a Multi-Channel MAC (MCM) since the existing single channel operation may cause packet transmission delay and unexpected communication failure. To offer a seamless safety message transmission during the various services, it is necessary to manage the MAC scheduler in wireless access in vehicular environments (WAVE) systems. The MCM consists of MAC softwares and MAC hardwares where the former and the later ones are implemented with real time operation system based C language and FPGA module with VHDL language, respectively. The performance and QoS are verified by practical measurements and compared with the scheme using single channel operation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.211-218
• /
• 2017

In this study, we implemented IoT Sensor Network using Mobius Platform and implemented four kinds of Z-wave sensors applicable to smart home service to verify its performance. The 12 common service functions (CSF) provided by Mobius enable application services including status monitoring of sensors to be implemented quickly. The standard service procedures and protocols have eliminated the design process of the system and shortened the meeting time for establishing protocol between application software developer, gateway developer and sensor developer, and discussion time for adjustment of opinion. We confirmed that the application service based on the implemented sensor network and the implementation of IoT sensor can shorten the development schedule, and confirmed that most of the products purchased in the market can be accommodated without change. We hope that such speediness and openness will be able to meet the demands of various services and contribute to expanding services and creating new markets.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.57-64
• /
• 2009

This paper presents the hardware implementation of the pyramidal KLT(Kanade-Lucas-Tomasi) feature tracker. Because of its high computational complexity, it is not easy to implement a real-time KLT feature tracker using general-purpose processors. A hardware implementation of the pyramidal KLT feature tracker using FPGA(Field Programmable Gate Array) is described in this paper with emphasis on 1) adaptive adjustment of threshold in feature extraction under diverse lighting conditions, and 2) modification of the tracking algorithm to accomodate parallel processing and to overcome memory constraints such as capacity and bandwidth limitation. The effectiveness of the implementation was evaluated over ones produced by its software implementation. The throughput of the FPGA-based tracker was 30 frames/sec for video images with size of $720{\times}480$.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.29-39
• /
• 2010

In this study, experimental test and numerical analysis were conducted to investigate the heat transfer characteristics and fiber performance of high strength concrete. The fire characteristics of the high strength concrete that couldn't be obtained through the test due to specific requirements and restrictions were forecast using numerical analysis approach. The outcome from the numerical analysis and the test were compared to verify and improve the reliability of the analysis. A numerical analysis of 80 and 100 MPa high strength concrete cases were carried out to identify the heat transfer characteristics and fire behavior using software, ABACUS (V6.8) From the results of verification experiment, a 25~55% level of beam shrinkage reduction was observed compared to the concrete without Fiber-Cocktail, indicating the improved fire resistance performance, which appeared to be attributable to the function of Fiber-Cocktail that was able to control the heat transfer characteristics and ultimately result in enhancing the fire resistance performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.53-59
• /
• 2009

By the use of open source and 16bit Microcomputer, IDB(Integrated Development Board) for embedded technical education was designed and developed. Based on 16bit MCU H8/300H, LED, LED Matrix, motors, sensors and various I/O circuitry, and the connection to a computer via the SCI, and $16{\times}2$ character LCD was designed and implemented on IDB. In addition, the software development environment was build by the assembler and H8 C compiler which is provided to the open-source software. And memory expansion was considered to include TRON(Real time OS) and uClinux. To verify the developed board, IDB was fabricated by PCB machine, and the fuction was confirmed by the basic I/O control program.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.311-318
• /
• 2020

A virtual power plant is a kind of software power plant that enables participation in power operation by integrally managing individual distributed resources. This paper proposes a common information communication architecture based on the TASE.2 standard and the OpenADR2.0 standard to operate a virtual power plant as a single power system. ESS is designed TASE.2 SBO devices that related objects are mapped to OpenADR2.0 services and composed as a single sequence type. Through simulation verification, it conforms data exchange and operation based on both standards.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1188-1193
• /
• 2004

So far, there have been grossly 3 types of studies on GF(2m) multiplier architecture, such as serial multiplication, array multiplication, and hybrid multiplication. Serial multiplication method was first suggested by Mastrovito (1), to be known as the basic CF(2m) multiplication architecture, and this method was adopted in the array multiplier (2), consuming m times as much resource in parallel to extract m times of speed. In 1999, Paar studied further to get the benefit of both architecture, presenting the hybrid multiplication architecture (3). However, the hybrid architecture has defect that only complex ordo. of finite field should be used. In this paper, we propose a novel approach on developing serial multiplier architecture based on Mastrovito's, by modifying the numerical formula of the polynomial-basis serial multiplication. The proposed multiplier architecture was described and implemented in HDL so that the novel architecture was simulated and verified in the level of hardware as well as software. The implemented GF(2m) multiplier shows t times as fast as the traditional one, if we modularized the numerical expression by t number of parts.