• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.231-237
• /
• 2010

Computed tomography (CT) has been established as an important diagnostic tool in clinical medicine and has become a major source of medical exposure. A nationwide survey regarding CT examinations was carried out in 2007. Thanks to the appeasement policy regulating the import of CT scanners, there are 1,825 CT scanners across the country as of the end of March 2010, which means that we have 36.8 CT scanners per one million people. The annual number of examinations was 3.29 million, the number of examinations per 1000 population was 68. The most part of examinations was abdomen and pelvis. and the collective effective dose was in these parts. The effective dose per one population was evaluated as 0.952 mSv.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1155-1160
• /
• 2017

This paper describes a system implementation for the automatic inspection on the ventilating electronic device based on the reliability improvement. To be enhancement, the inspection error is minimized by the automatic inspection system on the ventilating apparatuses against the manual inspecting system. The system consists of the control system, software structure and monitoring system to be scanning the inspection processing. The inspection system for reliability improvement is evaluated in Gage Repeatability and Reproducibility. The experimental results are improved about 2 times inspecting speed, measured error ${\pm}0.02V$, effectiveness of discriminating performance 15%, missing probability 17% and false alarm probability 12% respectively in comparing with the manual inspection based on the wind pressure sensor. The system will be also improved more by making database and product bar codes for the total quality control system to the effective reliability enhancement in the future.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.199-201
• /
• 2010

본 논문에서는 광케이블과 소형렌즈를 검사하기 위한 고해상력 투영검사기를 개발하였다. 개발된 고해상력 투영검사기는 30V/7A 전원장치에서 할로겐램프를 연결하여 원격장치로 램프의 밝기를 조절한다. 개발된 고해상력투영검사기는 관련기술을 확보하였고 수입대체효과를 가져올 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.456-458
• /
• 2008

RV 차량의 쿠션 패널을 생산하여 조립하는 공정은 작업자의 오류로 인한 불량이 많이 발생된다. 본 연구에서는 이러한 불량을 제거하기 위한 화상검사장치를 개발함을 목적으로 한다. 이러한 장치개발은 쿠션패널 고정용 지그, 카메라 인식영역, 이송을 위한 X-Y테이블, 카메라 모듈, 제어기 로 구성되어진다. 본 논문에서 제안한 화상검사장치를 설계하고 화상인식 프로그램을 통해 불량을 판정하여 화상검사 시스템의 타당성을 검증하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.286-291
• /
• 2013

In this paper, in-line type flip chip bump 3D inspection equipment, using white light interferometer with large F.O.V., which is aimed to be used in flip chip bump test process is developed. Results of flip chip bump height measurement in many substrates and repeatability test results for the bumps in fixed location of each substrate are shown. Test results from test bench and those from developed flip chip bump 3D inspection equipment are compared and as a result repeatability is improved by reducing the impact of system vibration. A valuation basis for the testing quality of flip chip bump 3D inspection equipment is proposed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.30-37
• /
• 2003

In order to replace the manual ultrasonic testing(UT) with an automated UT(AUT), a scanner which enables us to control the positions of a transducer is essential. Encoders have been commonly used to obtain the position information from the conventional scanners controlled by motor. Encoders have various advantages in many aspects. However, if the slip of motor wheel occurs during scanning, various errors are involved in the position accuracy. Thus, the position information of encoders becomes meaningless in case of slip. The reliability of AUT results nay become serious problem. Hence, slip must be avoided, but it can not be completely avoided at present time. In this paper, a new idea that surface wave is used to solve this problem and replace encoders has been proposed. It is shown that this idea can be employed in AUT scanner without encoders. That is, one transducer transmitting surface wave is fixed and the other transducer attached to the scanner receives UT signal. Then, computer calculates the present position of scanner based on the information given by surface wave. Thus, the movement of a scanner can be controlled by the amount of input based on the information obtained.

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.305-310
• /
• 2003

In this paper we deal with the system design and development of the high-speed automatic precision inspection for the defects of bolts. In order to inspect bolts continuously, we used the conveyor system. Also, this conveyor includes the servo motor and encoder to achieve accurate movement. According to encoder signal, line-scan camera captures the line-by-line image of bolts and after one frame is accumulated, various parameters are calculated and inspected by image processing algorithms. Experimental results using the developed facilities are presented to demonstrate the efficiency of the proposed equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.4 s.193
• /
• pp.7-14
• /
• 2007

• Annual Conference of KIPS
• /
• 2002.11a
• /
• pp.687-690
• /
• 2002

본 논문은 자동으로 볼트를 검사할 수 있는 장치에 대한 시스템 설계 및 제품 개발에 관해 다룬다. 볼트를 연속적으로 검사하기 위해 컨베이어를 이용하고 이를 동작시키기 위한 서보모터와 엔코더를 부착하여 정확한 이송량를 유지하게 된다. 엔코더 신호를 수신한 라인스캔 카메라의 동작에 따라 프레임 그래버로 볼트 영상을 전송하며 한 프레임을 구성한 후 영상 검사 알고리즘에 의해 파라메터를 측정하고 검사하게 된다. 제작된 결과물을 이용하여 실험을 통해 본 장치의 효용성을 입증하고자 한다.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.1621-1624
• /
• 2010

디스플레이 모듈 검사 장치는 디스플레이 모듈 제조공정 및 품질보증부서에서 주로 사용되며, 디스플레이 모듈의 불량유무를 확인하여 디스플레이 출하 제품의 품질을 높이는 장비이다. 기존의 검사장비는 부피가 크고 별도의 프로그램을 통하여 PC에서 제어하는 형태로 되어 사용이 불편하고 휴대가 어려운 문제가 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 소형 휴대형 디스플레이 모듈 검사 장치를 설계 및 구현하였다. 설정데이터 전송 및 1600*1200크기의 EPD 디스플레이에 JPEG/BMP정지영상을 출력하여 BMP재현함으로 검사기기의 성능을 검증하였다.