• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.841-852
• /
• 2022

In this paper, a 3-phase inverter output waveform generator based on SPWM control was developed to verify the performance of the LCL filter. In order to obtain a test signal for verifying the performance of the filter, first, a DSP-based 3-phase SPWM signal generation algorithm was developed, and then a three-phase voltage source inverter circuit was designed using three half-bridge gate drivers. Next, one LCL filter was experimentally fabricated to verify the effectiveness of the developed SPWM-based 3-phase inverter output waveform generator as a test signal generator, and a DSP-based performance verification system was experimentally constructed. Finally, by comparing the three-phase voltage waveform before and after the LCL filter obtained in the output control experiment with the given time ratio, the effectiveness of the SPWM-based 3-phase inverter output waveform generator was verified.

• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.169-175
• /
• 2014

According to database of medical institutions of health insurance review & assessment service in 2013, 1118 hospitals and clinics have department of radiology in Korea. And there are CT, fluoroscopic and general radiographic equipment in those hospitals. Above all, general radiographic equipment is the most commonly used in the radiology department. And most of the general radiographic equipment are changing the digital radiography system from the film-screen types of the radiography system nowadays. However, most of the digital radiography department are used the film-screen types of the radiography system. Therefore, in this study, we confirmed present conditions of technical items for general radiography used in hospital and research on general radiographic techniques in domestic medical institutions. We analyzed 26 radiography projection method including chest, skull, spine and pelvis which are generally used in the radiography department.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1123-1131
• /
• 2023

This study aimed to present a method to effectively suppress metal artifacts caused by spinal fusion surgery during spinal MRI study. For this purpose, a phantom made of spinal surgery screws was created to reproduce the metal artifact. Then, images were acquired with 1.5T and 3.0T MRI to evaluate changes in metal artifacts according to magnetic field strength. In addition, metal artifacts were evaluated by increasing the receive bandwidth to 200, 400 and 800 Hz/PX. As a result, metal artifacts occurring in images obtained from the 1.5T MRI decreased by approximately 52.2% compared to images obtained from the 3.0T MRI, showing a significant difference (p<0.05). In particular, the signal loss and signal pile up areas were reduced by approximately 52.81% and 42.71%, respectively, showing a significant effect in suppressing metal artifacts. On the other hand, when images were acquired while increasing the receive bandwidth from 200 to 800 Hz/PX, there was no significant effect, with a decrease of up to 8.93% for the 1.5T MRI and up to 10.98% for the 3.0T MRI (p>0.05). As a result of this study, increasing the receive bandwidth reduced signal loss and reduced some metal artifacts, but did not have a significant effect because it did not suppress signal pile up. However, when the magnetic field strength was reduced from 3.0T to 1.5T, signal loss and signal pile up were greatly reduced, effectively improving the metal artifact. Therefore, in order to suppress metal artifacts caused by spinal fusion surgery, study using a low magnetic field MRI can be said to be the most effective method.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.267-275
• /
• 2010

Quality management of an x-ray unit drastically differs according to the type of establishment of medical institutions. Many primary medical institutions have it, but they do not pay much attention to quality management. In the study, Gyeongbuk area has been divided into four zones from January 4, 2010 to September 3, 2010, and four places were designated by city. Among medical institutions located at a total of 16 sites, the target was 8 places with X-ray emission equipment 10 years or more in use as well as 8 places with X-ray emission equipment less than 10 years in use. The 5 essential items of quality control were tested. In the test that checked for equipment it was found that sites with X-ray emission equipment 10 years or more in use didn't have ground connection (6.25%) while all of them passed the current leak test. In the exposure dose reproducibility test 4 sites with X-ray emission equipment 10 years or more in use (25%) and 1 site with X-ray emission equipment less than 10 years in use didn't pass the test. In the KVp accuracy test 5 sites with X-ray emission equipment 10 years or more in use (31.25%) and 2 sites with X-ray emission equipment less than 10 years in use (12.5%) didn't pass the test. In the tube current and tube current amount test 3 sites with X-ray emission equipment 10 years or more in use (18.75%) and 1 site with less than 10 years in use (6.25%) didn't pass the test. According to the findings of the present research, quality control at medical institutions with X-ray equipment 10 years or more in use was poorer than medical institutions with X-ray equipment less than 10 years in use. In this regard, administrative and technical measures need to be taken as soon as possible. In addition, owners of medical clinics or unit managers need to raise awareness, and it is necessary to revise a regular test cycle every year or every two years if they have old equipment or if the equipment is not used on a frequent basis. And it is also important to provide regular educational programs for quality management.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1161-1166
• /
• 2017

Recently, with the development of display technology, AMOLED(Active Matrix OLED) panel production and demand are increasing. Unlike LCD, AMOLED panel basically does not need backlight, so it can output clear images with low power consumption. Therefore, the AMOLED market is growing globally. Accordingly, the demand for inspection devices required for production is also expanding. The inspection device of the AMOLED panel aging system operates in conjunction with MES(Manufacturing Execution System) and MIS(Management Information System), and it is efficient to construct network environment. The inspection device used for panel aging is a pattern generator capable of outputting multiple signals. Efficient design is required to operate multiple signal generators. To solve this problem, the proposed system proposed a method for remotely controlling the signal generator remotely and a method for driving the AMOLED panel. And the timing and power setting results are presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.521-537
• /
• 2000

Ultrasonic imaging is the most widely used modality among modern imaging device for medical diagnosis and the system performance has been improved dramatically since early 90's due to the rapid advances in DSP performance and VLSI technology that made it possible to employ more sophisticated algorithms. This paper describes "main stream" digital signal processing functions along with the associated implementation considerations in modern medical ultrasound imaging systems. Topics covered include signal processing methods for resolution improvement, ultrasound imaging system architectures, roles and necessity of the applications of DSP and VLSI technology in the development of the medical ultrasound imaging systems, and array signal processing techniques for ultrasound focusing.

• Journal of the KSME
• /
• v.34 no.11
• /
• pp.859-866
• /
• 1994

석유화학플랜트에서 운용되는 반응로, 저장탱크, 열교환기 등의 압력용기 그리고 배관 등의 시 설물은 장기간 사용함에 따라 고온, 고압, 부식성 분위기, 열응력, 피로 등 여러 가지 요인으로 경년열화되어 노후화 된다. 일반적으로 이들 설비들에서 작용하는 유체나 가스의 누출은 화재나 폭발과 같은 재해 뿐만아니라 주위 환경을 오염시켜 공해를 유발하게 되며, 이들 시설물에 대한 신뢰성 및 안전성 확보는 국가기간 산업에서 매우 중요하며 이와 관련된 장치의 설계, 시공 뿐만 아니라 시험검사 및 평가기술 측면에서도 중요시되고 있다. 플랜트 시설물에 대한 가동중 주기적인 안전진단은 현상의 파악 뿐만 아니라 인명과 재산의 손실을 미연에 예방하고 경제적 이고 효율적인 운영계획 수립에 필수적인 것이다. 이 글에서는 국내 석유화학플랜트의 검사현 황을 알아보고 앞으로 플랜트의 효율적 운영 및 안전 운전을 위한 가동중검사 기술 및 개선대 책에 대하여 기술하고자 한다.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.449-454
• /
• 2003

In this paper, GU environmental controller is implemented with USB(Universal serial bus) IF(interface). Especially, the performance examination of ultrasound diagnostic device which connects external USB port with front panel is automatically inspected by VC++ examination program. The test program minimizes the operation of inspector with making the examined result audible or visible, and maximizes the productivity of custom device. The GUI environmental controller controls a standard keyboard, a track ball with dedicated buttons to emulate a standard two-button mouse, switches, rotary encoders, an analog potentiometer group, two alpha-numeric displays. and a touch screen; all of which generate events for the host.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.1
• /
• pp.98-105
• /
• 1989

Detection of creep damages in centrifugally cast HK-40 reformer furnace catalyst tube is a common problem for the safety and scheduled operation of chemical plants. This study was focused on the development of an automatic ultrasonic scanning device with which the creep damage of welded zone of HK-40 reformer tubes is detected and evaluated.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.4 no.2
• /
• pp.15-19
• /
• 1985

Computerization of ultrasonic scanner is considered to achieve more quantitative and reliable ultrasonic testing. Testech LS-24 ultrasonic scanner is modified, and step motors in this modified ultrasonic scanner are driven by multiprogrammer controlled by computer. Two step motors can be controlled independently and simultaniously. The performance of computerized ultrasonic scanner is examined entloying modified C scan for a flat bottom hole ultrasonic reference block.