• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.655-662
• /
• 1996

기술적으로는 다짐장비의 개선으로 성토다짐의 시공속도가 매우 빨라지고 있으나 국내에서 적용하고 있는 현장다짐 밀도 및 수분함량 측정 방법(KS F 2311 KS F 2306)$^{(1)}$ 은 신속한 측정을 어렵게 하고 있다. 본 연구는 외국에서 개발 현재 활발히 적용되고있는 방사성동위원소를 이용한 함수량측정기개발의 시작단계로 기본설계 결정을 목적으로 한다. 함수량 측정 RI계기의 원리를 먼저 살펴본 후 실험실 내에서 자연건조된 성토용 흙으로 다짐을 하여 공시체를 제작한 뒤, 실험실용 함수량측정 RI계기를 공시체위에 놓고 폴리에틸렌과 중성자 검출기의 개수를 변화시켜가며 일정시간동안 측정개수를 측정한 값을 분석한 결과 목표측정 시간을 1분으로 하였을 때 신뢰측정개수인 10,000개이상을 계측하면서도 경제적으로 최소인 중성자검출기의 개수는 2개, 폴리에틸렌의 두께는 7cm로 결정되었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.4
• /
• pp.103-111
• /
• 2009

Moisture is one of the important design factors that affects to the changes of physical properties and air permeability in the composting matrix. This study examines the effects of moisture during the wetting and drying procedure on physical properties like bulk density, particle size, free air space and air permeability in the sawdust used as the bulking agent in composting process. During both procedures of wetting and drying of the water, with increasing moisture content, bulk density and particle size increased, but FAS decreased. In the range of near 40 to 60% moisture content on a wet basis, particle size and FAS in wetting procedure were larger and higher than those in drying procedure. During wetting procedure, pressure drop continuously decreased ranging from near 20 to 60% moisture content, despite of decreasing FAS as a consequence of increasing moisture, and then over the range of 60% moisture content, pressure drop rapidly increased to the saturated moisture condition while the pore space was filled with the water. On the other hand, during drying procedure, pressure drop decreased from the saturated condition to 40% moisture content. In the recommended range of 50 to 60% moisture content for composting operation, pressure drop in wetting procedure were lower than in drying procedure. For the enhancement of the air permeability in the composting matrix, the wetting procedure was proper than the drying procedure, and the optimum moisture content for the efficient composting operation was appeared to be near 60%.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.62-63
• /
• 2000

광정보 처리 시스템의 기록매질로 많이 연구되고 있는 포토폴리머는 빛의 세기에 따른 굴절률 변화로 정보를 기록하며, 회절효율이 높은 특성을 가지고 있다. 화학처리 없이 건조처리(dry processing)만으로 쉽게 홀로그램을 제작할 수 있으며, 노출이 곧 자체현상(self-developing)이므로 처리가 간편한 장점을 갖고 있다. 최근에는 높은 저장 밀도와 빠른 액세스 시간을 동시에 제공할 수 있는 홀로그래픽 메모리 시스템의 기록매질로 적용하기 위한 연구가 활발하게 진행되고 있다. (중략)

• 보존과학연구
• /
• s.11
• /
• pp.221-233
• /
• 1990

4종의 상태가 좋은 그리고 2종의 열화된 수침 침엽수재(Pinus massoniana,Pinus.densiflora, Cunninghamia lanceolata, Crypto meria japonica)를 PEG400과PEG4,000용액으로 처리하였다. 모든 종이 안정화처리에 똑같게 반응을 보였다. 전체적으로 건전재나 약간 열화된 수침재는 PEG400 20%용액으로 처리한 결과 치수안정화가 달성되었다. PEG4,000의 50%용액으로 처리한 목재의 건조에 대한 수축은 심하게 열화된 목재에 대해 열화되지 않은 목재에서는 1/2에서 1/3정도 감소하였다. 엄격한 상관관계가 최적안정화를 위해 PEG와 목재의 밀도간에 존재한다. 최적으로 처리된 목재는 86%상대습도 이하에서는 축축하게 되지 않는다. PEG400과 PEG4,000으로 처리한 2단부함침이 황해에서 구조된 중국 정크선의 목재를 안정화시키는데 대해 추천된다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.366-374
• /
• 2017

This study investigates enzyme stabilization in clay-rock bricks through mechanical tests and image processing. Appropriate soil mixtures were designed using clay/crushed rock with ratios of 70/30, 60/40, 50/50, 40/60, and 30/70 by weight to verify the strength of the enzyme brick and soil compaction. The maximum compressive and flexural strengths in the 60/40 ratio mixture were found to be 5MPa and 1.25MPa, respectively; however, the maximum dry unit weight of $2.073g/cm^3$ was found in the 50/50 clay/gravel ratio mixture. Generally, the strength of the enzyme brick was improved by 27%. The paper concludes that in order to achieve optimal strength, soils should be mixed with the 60/40 clay/gravel ratio, which provides an adequate strength, while 50/50 ratio should be used for achieving more compaction. The SEM-EDX observation and Matlab image processing verified how the bond structure appeared after enzyme stabilization. It was found that enzymes created bond with the clay soil and the crushed rock for rendering strength and stability.

• Asian Journal of Turfgrass Science
• /
• v.19 no.2
• /
• pp.131-140
• /
• 2005

This study was conducted to compare cold tolerances and growth rates of 5 basic species, commercial lines, and breeding lines of zoysiagrass. Total 41 zoysiagrasses were tested at the northern part (Jeokseong-myeon) and the middle part (Cheonan) of South Korea. Cold tolerance (survival rate during winter), growth rate, green-up speed, and density data were collected visually. Four types of zoysiagrasses (Z. matrella, Z. tenuifolia, USm, and S4M2) with genetic characteristics of Z. matrella died during winter cold, while the others survived. Midium leaf type zoysiagrasses, such as Anyang1, Samdeock1, Anyang2, SJ21, and Pyeongdong, with genetic characteristics of both Z. sinica and Z. macrostachya showed vigorous growth rate one year after planting at the northern part (Jeokseong-myeon). Twenty nine ($70.7\%$) zoysiagrasses showed vigorous growth rate, but the other twelve ($29.3\%$) zoysiagrasses died by cold and drought condition at the middle (Cheonan) part of S. Korea. Anyang2, AJ9-7, Samdeock1, Samdeock2, Samdeock3, and Zenith-C showed vigorous growth rate even though cold and drought environmental condition were artificially provided at these region. But, SJ2-19, NSm, 88Mey, 88Mey-7S, 88Mey-9S, SJ2l-10, ASm, and DBm which did not die at the northern part, showed serious injury at the middle part of S. korea. From this results, we can conclude that drought is as important factor as low temperature for zoysiagrasses during winter.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.23-27
• /
• 2008

In this experiment, growth and yield were affected by planting density, pinching and mowing dates. The greatest growth and yield were obtained at a planting density of $90cm{\times}30cm$. In this planting density, plant grew to the height of 140 cm, with 32 primary, 164 secondary, and 367 tertiary branches per plant. Weight of dry flowers reached 98 kg per 10a with this planting density, which was 40% increased as compared to planting density of $120cm{\times}30cm$. Stem diameter, shoot dry weight, and weight of dry flowers increased by pinching plants as compared to those of non-pinched plants. The greatest weight of dry flowers was obtained in the plant pinched on July 10 with 102 kg per 10a, a 57% increase as compared to the control. Growth and yield were similar for both palnts which were not mowed and mowed on June 10. However, plants mowed on July 10 had significantly smaller plant height, stem diameter and number of branches than the control. An accumulated shoot dry weight was similar for all mowing treatments. The greatest weight of dry flowers and number of flowers per plant were obtained in June 10 mowing treatment with 123 kg and 2,592 flowers per 10a, respectively.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.652-659
• /
• 2015

The physical properties of wheat kernels were determined as a function of moisture content to optimize the design of equipment for post-harvest management. Several properties, including bulk density, dynamic repose angle, one thousand-kernel weight, specific gravity, length, width, thickness, and area of two wheat cultivars (Baekjjung: B and Jogyeong: J ), were studied in the moisture range from approximately 9% to 30% wet basis. As moisture increased, length increased linearly from 6.42 to 7.20 mm (B) and 8.71 to 9.15 mm (J), width increased from 2.90 to 3.49 mm (B) and 4.12 to 4.43 mm (J), thickness from 2.94 to 3.20 mm (B) and 3.29 to 3.63 mm (J), and area from 14.13 to $19.44mm^2$ (B) and 27.75 to $31.25mm^2$ (J). Additionally, the dynamic repose angle and one thousand-kernel weight increased linearly from $46.3^{\circ}$ to $54.0^{\circ}$ (B) and $46.3^{\circ}$ to $54.5^{\circ}$ (J) and from 32.26 to 41.51 g (B) and 45.30 to 63.07 g (J), respectively, as the moisture content increased. Based on the experimental measurements, only the bulk density and specific gravity decreased from 754.0 to $664.1kgm^{-3}$ (B) and 776.1 to $660.0kgm^{-3}$ (J) and from 1.2950 to 1.2265 (B) and 1.3379 to 1.2671 (J), respectively, as moisture content increased.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.746-752
• /
• 2016

This research was carried out to identify aerodynamic property as a function of moisture content for designing equipment such as for post-harvest management. Terminal velocity of two wheat varieties {Backjjung (B) and Jogyeong (J)} with selected sound, damaged kernel and foreign materials (Wheat stick, Wheat husks) were measured with a designed vertical wind column at different moisture contents from about 9 to 30% wet basis. The results showed that terminal velocity of wheat and foreign materials except of Jogyeong's husks (p<0.05) had a significant difference at p<0.001. With increasing moisture content, the aerodynamic property values of the kernels and foreign materials of the two wheat varieties increased linearly. In detail, terminal velocity of sound and damaged kernel increased from 5.46 to 7.13 m/sec (B) and 7.48 to 8.60 m/sec (J), damaged kernel from 5.91 to 7.00 m/sec (B) and 6.48 to 7.75 m/sec (J). For foreign materials the terminal velocity of wheat stick increased from 2.92 to 4.07 m/sec (B) and 3.74 to 5.22 m/sec (J) whereas that of husks from 1.07 to 1.85 m/sec (B) and 2.02 to 2.33 m/sec (J) each. For air separation of wheat and foreign materials, the air flow should be less than 5.22 m/sec due to the range (1.07~5.22 m/sec) of foreign materials in wheat.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.17-24
• /
• 2008

This study is conducted to investigate the possibility of the utilization of the mixed soil formed by mixing stone sludge, bentonite, and residual soil as a soil sealant sustaining both stability and capacity in the barrier system. A series of tests were performed on the mixed soils to evaluate basic properties such as compaction, compressive strength, permeability and CBR of these materials. The results indicates that as the stone sludge content increases, the optimum moisture content increases a little, but the maximum dry density decreases. The compressive strength and CBR decrease, and the cohesion, internal friction angle and expansion ratio increase. When the bentonite content increases, the maximum dry density decreases, and the optimum moisture content, compressive strength and cohesion, internal friction angle, CBR and expansion ratio increase. Mixing ratio of the mixed soil contained with the stone dust more than 10% and the bentonite less than 10% satisfies the standard of the permeability coefficient as the soil sealant.