• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.480-487
• /
• 2009

The herbicide dicamba (2-methoxy-3,6-dichlorobenzoic acid) in soil and plants was determined by gas chromatography-mass spectrometry (GC/MS). The samples were extracted with diethyl ether at pH 2, and washed with 0.1 N HCl, and then dried. The dried residue was derivatized in 1 mL of 10% $H_2SO_4$-MeOH for 2 hr at $80^{\circ}C$. The reaction mixture was neutralized with 4 mL of sodium bicarbonate solution and reextracted with 5 mL of diethyl ether. After the extract was concentrated, dicamba was determined by GC/MS-SIM mode. There was good linearity above 0.999 in the ranges of the $1.0{\sim}100{\mu}g/kg$. Total 42 sample including 32 soil samples and 10 plants samples were analyzed by developed method. Dicamba was detected in the concentration range of $2.9-123.9{\mu}g/kg$ in 15 samples among 32 soil samples and in the concentration range of $43-33,252{\mu}g/kg$ in 5 samples among 10 plants samples. A cause of the wither and die of the pine trees is suspected to spray dicamba around or directly to them.

• Microbiology and Biotechnology Letters
• /
• v.37 no.3
• /
• pp.231-237
• /
• 2009

This paper aimed to develop a solvent extraction and purification process to recover high-purified ${\beta}$-carotene from recombinant Escherichia coli. Cells harvested from the culture broth were treated through numerous steps: dehydration, solvent extraction, crystal formation and separation. To optimize the extracting condition, experiments were carried out to investigate the effect of cell disruption, temperature, organic solvents, solvent-biomass ratio on the yield of ${\beta}$-carotene extracted from cells. The result indicated that no significant differences of extraction yield were observed from cells with or without step of cell disruption. Among different extracting solvents, the highest extraction yield of ${\beta}$-carotene, 30.3 mg-${\beta}$-carotene/g-dry cells, was obtained with isobutyl acetate at solvent-biomass ratio 25 mL/g-dry cells at $50^{\circ}C$. Notably, in case of acetone, the extraction yield was quite low when using acetone itself, but increased almost up to the highest value when combining this solvent and olive oil. The purity of ${\beta}$-carotene crystals obtained from crystallization and separation was 89%. The purity degree was further improved up to 98.5% by treating crude crystals with additional ethanol washing.

• Composites Research
• /
• v.14 no.3
• /
• pp.18-31
• /
• 2001

Interfacial and microfailure properties of the modified steel, carbon and glass fibers/cement composites were investigated using electro-pullout test under tensile and compressive tests with acoustic emission (AE). The hand-sanded steel composite exhibited higher interfacial shear strength (IFSS) than the untreated and even neoalkoxy zirconate (Zr) treated steel fiber composites. This might be due to the enhanced mechanical interlocking, compared to possible hydrogen or covalent bonds. During curing process, the contact resistivity decreased rapidly at the initial stage and then showed a level-off. Comparing to the untreated case, the contact resistivity of either Zr-treated or hand-sanded steel fiber composites increased to the infinity at latter stage. The number of AE signals of hand-sanded steel fiber composite was much more than those of the untreated and Zr-treated cases due to many interlayer failure signals. AE waveforms for pullout and frictional signals of the hand-sanded composite are larger than those of the untreated case. For dual matrix composite (DMC), AE energy and waveform under compressive loading were much higher and larger than those under tensile loading, due to brittle but well-enduring ceramic nature against compressive stress. Vertical multicrack exhibits fur glass fiber composite under tensile test, whereas buckling failure appeared under compressive loading. Electro-micromechanical technique with AE can be used as an efficient nondestructive (NDT) method to evaluate the interfacial and microfailure mechanisms for conductive fibers/brittle and nontransparent cement composites.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.204-211
• /
• 2006

For the production of the recombinant human interferon-gamma(rhIFN-${\gamma}$) in Escherichia coli, human glucagon and ferritin heavy chain were used as fusion partners. Even though rhIFN-${\gamma}$ is expressed as an inclusion body form in E. coli because of strong hydrophobicity of itself, over 50% of fused rhIFN-${\gamma}$ was expressed as soluble form in E. coli $Origami^{TM}$(DE3) harboring pT7FH(HE)-IFN-${\gamma}$ which encodes ferritin heavy chain-fused rhIFN-${\gamma}$. In the case of using glucagon-ferritin heavy chain hybrid mutant as a fusion partner, 6X His-tag was additionally introduced to N-terminus of GFHM(HE)-IFN-${\gamma}$ for enhancing purification yields of rhIFN-${\gamma}$. Fusion protein HGFHM(HE)-IFN-${\gamma}$ with two 6X His-tag was more effectively bound to Ni-NTA agarose bead than GFHM(HE)-IFN-${\gamma}$ with a 6X His-tag. rhIFN-${\gamma}$ was completely purified from enterokinase-treated HGFHM(HE)-IFN-${\gamma}$ by Ni-NTA affinity column. For high-level production of rhIFN-${\gamma}$, glucose was used as the sole carbon source with simple exponential feeding rate($2.4{\sim}7.2g/h$) in fed-batch process. The effective lactose concentration for the expression of the rhIFN-${\gamma}$ was $10{\sim}20mM$. Under the fed-batch culture conditions, rhIFN-${\gamma}$ production yield reached 11 g DCW/L for 6 hours after lactose induction.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.18 no.2
• /
• pp.35-42
• /
• 2018

Purpose: To follow up Korean patients with metabolic and endocrine disorders ascertained by Korea Genetics Research Center, and assess the long-term effectiveness of extended newborn screening program in Korea. Methods: From January 2000 to December 2017, tandem mass spectrometry and fluoroimmunoassay were employed in extended newborn screening (NBS). The NBS program obtained dried blood spots from 283,626 babies, 48 hours after birth, and screened for galactosemia, congenital hypothyroidism (CH), congenital adrenal hyperplasia (CAH), and 50 preventable inborn errors of amino acid, fatty acid, and organic acid metabolism. Results: 28 cases of amino acid disorders, 75 cases of organic acid disorders, 27 cases of fatty acid disorders, 51 cases of urea cycle disorders, 127 cases of CH, 14 cases of CAH, and 15 cases of galactosemia were ascertained through NBS and subsequent confirmatory laboratory tests. Patients with amino acid metabolic disorders, galactosemia, CH, or CAH were more likely to have a better long-term outcome if detected early. Early management of MSUD led to much better outcome in over 90%. Despite early intervention, 32% of other organic acidemia cases still resulted in developmental delay and neurological problems. Fatty acid disorders showed varied results; those with EMA and MCAD had a good outcome, but those with VLCAD had serious neurological problems and considerably higher mortality. 75% with UCD experienced serious neurological complications and higher mortality. Conclusion: The nation-wide NBS program must be accompanied by comprehensive long-term management and physician and family education of inborn errors of metabolism for a better outcome.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.169-187
• /
• 2023

Aggregates from 84 cities and counties in Korea were tested for quality to allow analysis of the physical characteristics of aggregates from river, land, and forest environments. River and land aggregates were analyzed for 18 test items, and forest aggregates for 12 test items. They were classified according to watershed and geology, respectively. The observed physical characteristics of the river aggregates by basin were as follows: aggregates from the Geum River basin passed through 2.5, 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; clay lumps constituted the Nakdong River basin material; aggregates from the Seomjin River basin passed through 10, 5, and 2.5 mm sieves; those from the Youngsang River basin passed through 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; and aggregates from the Han River basin passed through 10, 5, 2.5, 1.2, 0.6, 0.3, and 0.08 mm sieves, Stability; Standard errors were analyzed for the average amount passing through 10, 0.6, and 0.08 mm silver sieves, and performance rate showed different distribution patterns from other physical characteristics. Analysis of variance found that 16 of the 18 items, excluding the absorption rate and the performance rate, had statistically significant differences in their averages by region. Considering land aggregates by basin, those from the Nakdong River basin excluding the Geum River basin had clay lumps, those from the Seomjin River basin had 10 and 5 mm sieve passage, aggregates from the Youngsang River basin had 0.08 mm sieve passage, and those from the Han River basin had 10, 0.6, and 0.08 mm sieve passage. The standard error of the mean of the quantity showed a different distribution pattern from the other physical characteristics. Analysis of variance found a statistically significant difference in the average of all 18 items by region. Analyzing forest aggregates by geology showed distributions of porosity patterns different from those of other physical characteristics in metamorphic rocks (but not igneous rocks), and distributions of wear rate and porosity were different from those of sedimentary rocks. There were statistically significant differences in the average volume mass, water absorption rate, wear rate, and Sc/Rc items by lipid.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.356-361
• /
• 2007

Cyanobacteria are a very old group of prokaryotic organisms that produce very diverse secondary metabolites, especially non-ribosomal peptide and polyketide structures. Although some cyanobacteria produce lethal toxins such as microcystins and anatoxins, some may be useful either for development into commercial drugs or as biochemical tools. Detection of unknown secondary metabolites was carried in the present study by a screening of 98 cyanobacterial strains from Cyanobiotech GmbH in order to establish a screening process, isolate pure substances and determine their bioactivities. A degenerated polymerase chain reaction technique as molecular approaches has been used for general screening of NRPS gene and PKS gene in cyanobacteria. A putative PKS gene was detected by DKF/DKR primer in 38 strains (38.8%) and PCR amplicons resulted from a presence of NRPS gene were showed by MTF2/MTR2 primer in 30 strains (30.6%), respectively. A screening of interesting strains was performed by comparing PCR screening results with HPLC analyses of extracts. HPLC analysis for a detection of natural products was performed in extracts from biomass. 5 strains were screened for further scale-up processing. 7 pure substances were isolated from the scale-up cultures and tested for bioactivities under consideration to purity, amount and molecular weight of substances. One substance isolated from CBT 635 showed cytotoxic activity. This substance may be regarded as Microcystin LR.

• Analytical Science and Technology
• /
• v.23 no.5
• /
• pp.485-491
• /
• 2010

A certified reference material (CRM) of KRISS 109-03-SSD was developed for the analysis of hazardous elements in soil. The target elements were As, Cd, Cr, Cu, Hg, Ni, Pb, Zn being regulated by the Soil Environment Conservation Act. Starting material was collected from tailing dump of an unworked tungsten mine at Sangdong (Gangwon-do, Korea). The starting material under-went through a series of fabricating process steps of screening, drying, grinding, sieving, blending, bottling, sterilization and was certified according to the ISO Guide 35. Isotope dilution-inductively coupled mass spectrometry (ID-ICP/MS) and instrumental neutron activation analysis (INAA) were used for the measurement. Homogeneity was tested according to ISO 13528 annex B. The certified values were determined using the results from two different methods or from two independent measurements using a method. Finally, certified values of seven elements of arsenic, cadmium, chromium, copper, lead, nickel and zinc were determined. Mercury did not satisfied the criteria of homogeneity and the result would be provided for information only, together with iron and tungsten. It was also studied, the extractable fraction of elements by aqua regia according to the ISO 11466 protocol being frequently studied for the purpose of environmental monitoring. It was performed as a inter-laboratory study by 6 laboratories of a public institute and universities. Standard deviation among the laboratories was much bigger than the uncertainty of the certified value. The result of inter-laboratory study on the extractable fraction will be provided for information, only.