• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.171-183
• /
• 2016

The effects of weather variations on winter hulless barley were analyzed using data obtained from winter crop situation test at Iksan from 1985 to 2015. The wintering stage in the 16 years from 2000 to 2015 has become colder and shorter than that in the previous 15 years from 1985 to 1999. This has resulted in an early sequence of regrowth date, heading date, and ripening date. Heading date of hulless barley was mostly influenced by regrowth date and period of stem elongation. Futher, the regrowth date and period of stem elongation were strongly negatively correlated with the average air temperature in February and the maximum air temperature in March, respectively. The number of spikes per $m^2$ and 1000-grain weight of Saechalssal cultivated from 2003 to 2015 showed strong positive correlations with yield. In early heading years, yield increased with extended ripening period and with increased 1000-grain weight. There was a strong negative correlation between 1000-grain weight and the average temperature during the ripening period. In the 15 years from 1985 to 1999, warm winters contributed to yield increase with increase in the number of spikes per $m^2$ and a long ripening period. In contrast, in the recent 16 years from 2000 to 2015, the large variability in air temperature during the wintering stage, the decreasing number of spikes per $m^2$ and the steadily increasing air temperature and decreasing precipitation during the ripening stage have caused high temperature stress and yield loss in late heading years.

• Korean Journal of Poultry Science
• /
• v.42 no.2
• /
• pp.181-189
• /
• 2015

The objective of this study was to investigate the effect of dietary supplementation of vitamin C and Sea buckthorn on the performance, blood biochemistry and meat quality in old laying hens. A total 200 Hy-Line Brown laying hens (101 weeks old) were randomly allotted to 1 of 5 dietary treatments : (1) Basal : basal diet, (2) Vit. C : basal diet + 0.1% vitamin C, (3) SB 0.1 : basal diet + 0.1% Sea buckthorn, (4) SB 0.5 : basal diet + 0.5% Sea buckthorn, and (5) SB 1.0 : basal diet + 1.0% Sea buckthorn. Each treatment was replicated 4 times with 10 birds units were arranged according to randomized block design. Feeding trial lasted 4 weeks under 16L:8D lighting regimen. The diets were fed to hens on an ad libitum basis for 4 weeks. Result indicated that during feeding trial of the experiment, hen-day egg production and feed conversion ratio were not significantly influenced by treatments. However, feed intake was significantly (P<0.05) higher in Vit. C and SB treated groups than the basal during 1 wks and 3 wks. Egg weight was significantly (P<0.05) higher in basal and Vit. C than the SB 1.0 treatment. There were no differences in carcass yield during feeding trials. However, partial ratio (breast and neck) was significantly (P<0.05) higher in SB 0.5 than other treatment. There were no differences in the level of leukocytes and erythrocytes. There were no significant differences on proximate analysis (DM, crude protein, crude fat, and crude ash), meat color, water holding capacity, cooking loss, and fatty acids concentrations. In conclusion, dietary supplementation of vitamin C and Sea buckthorn to the diet of old laying hens might be a potential ingredient for increasing partial weight (breast) in old laying hens.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.5
• /
• pp.501-508
• /
• 1993

Background: Sleep apnea syndrome is a common disorder which is estimated to affect about 1~4% of adult male population. And if untreated, sleep apnea can cause significant sequelae, such as hypertension, nocturnal cardiac arrhythmia, daytime hypersomnolence, and cognitive impairment. Various kinds of treatment for obstructive sleep apnea (OSA) have been developed. Among them nasal CPAP, first introduced by Sullivan et al in 1981, has received widespread interest and acclaim as a treatment of OSA, and is currently recommended as first-line treatment for OSA. We evaluated the effect of nasal CPAP in OSA and the side effects of nasal CPAP hindering patients from using nasal CPAP. Methods: We performed sleep studies in 20 OSA patients at 2 consecutive nights; baseline night at first day and CPAP night at second day. We compared apnea index, lowest oxygen concentration during apnea, maximal apnea time, and total apnea duration per total sleep time before and after CPAP. We also evaluated the side effects of CPAP with inquiry to the patients. Results: 1) Apnea index was significantly decreased after CPAP in 17 out of 20 OSA patients (85%) and increased in 3 patients (15%). 2) Average apnea index was significantly decreased after CPAP ($34.1{\pm}18.9/h{\rightarrow}15.4{\pm}10.3/h$, p<0.01). 3) Total apnea duration per total sleep time was also significantly decreased after CPAP ($28.5{\pm}16.0%{\rightarrow}11.9{\pm}9.3%$, p<0.05). 4) The lowest oxygen satuation and maximal apnea time were not significantly changed after CPAP. 5) The most frequent side effect of nasal CPAP was mask discomfort (80%), and the next was drying of nasal passages (65%). Conclusion: Nasal CPAP is an effective treatment for OSA. Futher studies should be concentrated on long term follow up of nasal CPAP for its therapeutic effects and the study of methods to enhance patients' compliance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.632-640
• /
• 2002

The objective of the study was to apply the vibration technique to reduce the viscosity of bonding adhesives and thereby compare the bond strength and resin penetration into dentinal tubules achieved with those gained using the conventional technique. Eighty-eight noncarious extracted human permanent molar teeth were sectioned to remove the coronal enamel and were embedded in 1-inch PVC pipe with acrylic resin. The occlusal surfaces were placed so that the tooth and the embedding medium were at the same level to form one flat surface, and the samples were subsequently polished with silicon carbide abrasive papers. The samples were randomly assigned to 4 groups(n=22). On Group 1 and 2, Single Bond(3M-ESPE, St. Paul, USA) was used, and on Group 3 and 4, One-Step(Bisco Inc., Schaumburg, USA) was used, and each was applied according to its manufacturer's instructions. For Group 2 and Group 4, vibration was applied with ultrasonic scaler for 10 seconds, and the adhesive was light-cured for 10 seconds. Resin composite was condensed on to the prepared surface in two increments using a mold kit(Ultradent Products Inc., USA) and each was light-cured for 40 seconds. After 24 hours in tap water at room temperature the specimens were thermocycled, and shear bond strengths were measured with a universal testing machine(Instron 4465, Canton, USA). To investigate infiltration patterns of the adhesive materials, the surface of specimen was examined with scanning electron microscope. The results were as follows. 1. The shear bond strengths of vibration groups(Group 2, Group 4) were significantly greater than those of the non-vibration groups(Group 1, Group 3)(p<0.05). 2. The shear bond strengths of Single Bond and One-Step were not significantly different (p>0.05). 3. The vibration groups showed greater number of resin tags in tubules and lateral branches under SEM.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.410-423
• /
• 1994

Seasonal and diurnal changes of stomatal diffusive resistance(S.D.R.) and transpiration rate(T.R.) were investigated for determining the ecophysiological water relations of economic tree species subjected to chronic water stress or exogenous abscisic acid treatment. Four species of oaks including Quercus serrata, Q. mongolica. Q. acutissima, and Q. variabilis were used as the experimental materials and also Fraxinus rhynchophylla was studied together with oaks. Stomatal diffusive resistances were repeatedly measured on the containerized 1-0 year seedlings subjected to two kinds of soil moisture regime (wet and dry) in June, August, and September by LI-1600 Steady State Porometer of LI-Cor, Inc.. Exogenous abscisic acid (ABA) solutions of 0.5 mM and 0.05 mM in July and August, respectively, were absorbed into shoots cut from the containerized seedlings for determining their effects on stomatal behavior and transpiration. Most of measurements in stomatal diffusive resistance maintained about 5 s/cm in the morning after sunrise despite of different treatments. But the values fluctuated frequently to high level above 20 s/cm through the afternoon until sunset in the seedlings subjected to dry soil moisture regime. Despite of various treatments and environmental conditions, stomatal diffusive resistances of Q. variabilis were more stable than those of Q. serrata or Q. acutissima. Their values of F. rhynchophylla changed more irregularly in comparison with those of oak species. Exogenous abscisic acid absorbed into shoots cut from seedlings increased stomatal diffusive resistance obviously in most of the species studied. The stomatal responses to abscisic acid treatment were more sensitive in July especially in Q. serrata than in Q. variabilis and Q. acutissima. But the effects of ABA treatment were presented more remarkably in Q. acutissima in August. The responses to abscisic acid were not certain in F. rhynchophylla because of their various fluctuation patterns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5915-5922
• /
• 2013

In this study, with the aim of improving the performance of shale to allow for its use as coarse aggregate for concrete, we coated shale aggregates with water repellents and polymers and evaluated their physical properties such as density, water absorption rate, wear rate, and stability depending on the coating method. In addition, the effects of the performance improvement were evaluated by assessing the properties of fresh concrete produced by varying the shale substitution ratio, as well as the compressive strength, flexural strength, and freeze-thaw resistance according to curing ages. The test results revealed that the absolute dry densities of all coated aggregates satisfied the standard density for coarse aggregates for concrete(>$2.50g/cm^3$),and the absorption rate of the shale aggregate coated with water repellent decreased by about 50% compared with that of uncoated shale. The wear rate of the polymer-coated shale decreased by up to 13.0% compared with that of uncoated shale. All coated aggregates satisfied the stability standard for coarse aggregates for concrete(${\leq}12$). The water repellent-induced performance improvement decreased the shale aggregates' slump by about 20~30mm compared with that of the uncoated shale aggregates, and the air content of the repellent-coated shale aggregate increased by up to 0.9% compared with that of the uncoated shale aggregate. The compressive strength of the polymer-coated shale aggregates at a curing age of 28 days was RS(F) 95.7% and BS(F) 90.0%, and the flexural strength was RS(F) 98.0 % and BS(F) 92.0% of the corresponding values of concretes produced using plain aggregates. Furthermore, the concrete using polymer-coated shale aggregates showed a dynamic modulus of elasticity of RS(F) 91% and BS(F) 88% after 300 freeze-thaw cycles, thus demonstrating improved freeze-thaw durability.

• Journal of Korean Society of Forest Science
• /
• v.55 no.1
• /
• pp.30-36
• /
• 1982

Wood biomass production at 1-year, 2-year, and 3-year rotations on both low and upper hills at 2m 2m spacing (25,000 trees/ha) was studied for a six-year period with following 12 species; Lespedeza cyrtobotrya Amorpha fruticosa. Robinia pseudoacacia, Acer saccharinum, Platanus orientalis Populus alba ${\times}$ P. glandulosa $F_1$, Salix alba, Pinus rigida, Alnus hirsuta var. sibirica, A. inokumai A. gultinosa, and A. incana. In One-year rotation, Lespedeza cyrtobotrya produced largest amoung of biomass (2.6 t/ha/year, fresh weight) and Populus alba ${\times}$ P. glandulosa $F_1$ the second largest (2.2 t/ha/year) on low hill. In two-year rotation, the latter produced the largest amount (4.8 t/ha/year) and Alnus hirsuta var. sibirica second largest (2.8 t/ha/year) on low hill. In three-year rotation, the largest weight (11.2 t/ha/year) was produced by Robinia pseudoacacia and the second largest (6.2 t/ha/year) by Alnus hirsuta var. sibirica on low hill Amorpha fruticosa, Acer saccharinum, Platanus orientalis and Salix alba were not suitable for biomass or fuelwood productio due to poor growth. Biomass yield on upper hill was reduced considerably for all tewlve species, with less than 4 t/year at maximum Only nitrogen fixing species (Robinia and Alnus species) are recommended on upper hill for biomass production wood sprouting ability of species was generally associated with good biomass production. Calori values of ovendry wood ranged from 4,485 cal/g for Salix alba to 5,125 cal/g for Alnus glutinosa. For maximum biomass production a three-year ratation with coppice is preferred to one-year and two-year roataions The best species appeared to be Robinia pseudoacacia and Alnus hirsuta var sibirica.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.266-280
• /
• 1994

Upper-air synoptic data and surface weather elements such as temperature, relative humidity, wind speed, cloud and precipitation were analyzed in some detail to determine the characteristics of Nopsae, a foehn-like surface wind over the Youngsuh region of Central Korea. NOAA AVHRR and GMS images are also referenced to identify the distribution of clouds and precipitation to classify the tpyes of foehn over the study area. The data period examined is from 1982 until 1993 of spring and summer months from March through August. Results of the anaylsis are as follows. Warm and dry air penetration over the Younesuh region has experienced on foehn days occured between March 21 and August 10 during study perion. The mean annual number of foehn the days were 28. Foehn phenomena were prominent during March 21-25, April 5-15, May 25-June 10, and June 26-30 pentads. The intensity of the phenomena can be evaluated as the difference of daily maximum temperature and relative humidity between windward sites and leeward sites. The intensity of daily maximum temperature reached 14.5$^{\circ}C$, but most values were in the range of 5.0-7.5$^{\circ}C$ (61%). Although strong intensity of foehns usually develop in June, it is common that farmers in the region experince more aridity during the foehnday of April and May due to the transplantation of rice seedlings. Long-run foehn are not common phenomena and 55% of foehn terminate in one day, but there is a record that Nopsae persisted up to 9 days continuously. The author identified using the cloud and precipitation data out of NOAA-11, AVHRR and GMS images is that one of them has no precipitation over windward side. The available data and the results of the analysis are somewhat inadequate. Since the results imply that wave phenomenon is potentially important in terms of local surface weather and vertical momentum transport, more detailed theoretical and observational studies are necessary to clarify the mechanism and the impacts of Nopsae.

• Radiation Oncology Journal
• /
• v.20 no.4
• /
• pp.303-308
• /
• 2002

Purpose : To determine the optimal radiation dose in a localized non-Hodgkin's lymphoma of the head and neck in the treatment setting for combined chemoradiotherapy. Materials an Methods :Fifty-three patients with stage I and II diffuse large ceil non-Hodgkin's lymphoma of the head and neck, who were treated with combined chemoradiotherapy between 1985 and 1998 were retrospectively reviewed. The median age was 49 years, and the male-to-female ratio was approximately 1.6. Twenty-seven patients had stage 1 disease and 26 had stage II. Twenty-three patients had bulky tumors $(\geq5\;cm)$ and 30 had non-bulky tumors (<5 cm). The primary tumors arose mainly from an extranodal organ $(70\%)$, most cases involving Waldeyer's ring $(90\%)$. All patients except one were initially treated with $3\~6$ cycles of chemotherapy, which was followed by radiotherapy. Radiation was delivered either to the primary tumor area alone $(9\%)$ or to the primary tumor area plus the bilateral neck nodes $(91\%)$ with a minimum dose of 30 Gy $(range\;30\~60\;Gy)$. The failure patterns according to the radiation field were analyzed, and the relationship between the dose and the in-field recurrence was evaluated. Results : The 10-year overall survival and the 10-year disease free survival rates were similar at $75\%\;and\;76\%$, respectively. A complete response (CR) after chemotherapy was achieved in 44 patients $(83\%)$. Subsequent radiotherapy showed a CR in all patients. Twelve patients $(23\%)$ had a relapse of the lymphoma after the initial treatment. Two of these patients had a recurrence inside the radiation field. No clear dose response relationship was observed and no significant prognostic factors for the in-field recurrences were identified because of the small number of in-field recurrences. However, for patients with tumors <5 cm in diameter, there were no in-field recurrences after a radiation dose 30 Gy. The 2 in-field recurrences encountered occurred in patients with a tumor $\geq5\;cm$. Conclusion .A dose of 30 Gy is sufficient for local control in patients with a non-bulky (<5 cm), localized, diffuse large cell non-Hodgkin's lymphoma when combined with chemotherapy. An additional boost dose in the primary site is recommended for patients with bulky tumors $(\geq5\;cm)$.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2015

The aim of this study was to investigate microbiological contamination levels in the manufacturing company of ginseng products (white and red ginseng). Firstly, the contamination level for ginseng and each stage ginseng were 1.8~4.9 log CFU/g (total bacteria), 1.2~3.0 log CFU/g (coliform), 0.8~4.1 log CFU/g (fungi). However, only Bacillus cereus among pathogenic bacteria was detected from a few sample. The contamination of total bacteria tended to decrease as ginseng was being processing. Therefore, that of finished products (white and red ginseng) showed the lowest contamination level among each stage ginseng sample. That of fungi decreased steadily, although the contamination of fungi has tended to increase right after ginseng was steamed. Secondly, the contamination level for working tools and facilities were $1.7{\sim}4.7log\;CFU/cm^2$ (total bacteria), $0.4{\sim}4.0log\;CFU/cm^2$ (coliform), $0.9{\sim}4.2log\;CFU/cm^2$ (fungi). Especially, washing and peeling machines were higher contamination level. Finally, the contamination level of worker who washed and steamed ginseng was higher than worker who shaped, sorted and stored ginseng. Also, Staphylococus aureus was detected at 0.2~0.7 log CFU/hand on some wokers' hands. These results showed proper heating condition (temperature and time) and tidy manufacturing facility are the most important to avoid developing any microbiological problem of Ginseng Products.