• The Magazine for Energy Service Companies
• /
• s.45
• /
• pp.18-21
• /
• 2007

영평기계설비(주)(대표 최영수)는 1992년부터 진행된 아파트지역난방 전환공사의 최초업자로 알려져있다. 지역난방 전환공사, 에너지절약 시설설치 공사 등 다양한 분야에서 설계, 시공 능력까지 고루갖춘 영평은 지난 12월, 에너지진단 전문기관으로 지정됐으며 건물이나 빌딩, 아파트의 에너지 진단을 실시, 최소한의 에너지로 최대한의 에너지절감 효과를 볼 수 있도록 돕고 있다. 수십 년간 에너지절약 사업 외길을 걸어온 영평기계설비(주) 최영수 대표를 만나 얘기를 들어봤다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.176-183
• /
• 2009

Distributed generation(DG) of combined cooling, heat, and power(CCHP)has been gaining momentum in recent year as efficient, secure alternative for meeting increasing energy demands. This paper presents the energy performance of microturbine CCHP system equipped with an absorption chiller by modelling it in hospital building. The orders of study were as following. 1)The list and schedule of energy consumption equipment in hospital were examined such as heating and cooling machine, light etc. 2) Annual report of energy usage and monitoring data were examined as heating, cooling, DHW, lighting, etc. 3) The weather data in 2007 was used for simulation and was arranged by meteorological office data in Daejeon. 4) Reference simulation model was built by comparison of real energy consumption and simulation result by TRNSYS and ESP-r. The energy consumption pattern of building were analyzed by simulation model and energy reduction rate were calculated over the cogeneration. As a result of this study, power generation efficiency of turbine was about 30[%] after installing micro gas turbine and lighting energy as well as total electricity consumption can be reduced by 40[%]. If electricity energy and waste heat in turbine are used, 56[%] of heating energy and 67[%] of cooling energy can be reduced respectively, and total system efficiency can be increased up to 70[%].

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.765-767
• /
• 2016

Building Energy commissioning is a process in which verifying and making the document during entire lifetime including planning, design, construction, test run of equipment, and maintenance to minimize the operational problems of building energy efficiency. The general commissioning is replacing the equipment or reconstructing the skin to achieve the performance for the design. This process is expensive and has the disadvantage of taking a long payback period by one operation. In this paper, we studied the monitoring-based commissioning (MBCx) to increase the energy efficiency of buildings through analyzing energy use data. MBCx is modeling a building energy, comparing the real energy use with it, detecting the cause of falling the efficiency, and running the optimal operation regularly.

• Solar Energy
• /
• v.15 no.3
• /
• pp.119-125
• /
• 1995

Since the using of heating energy associated with infiltration is significant in a building, the efforts to minimize the infiltration while ensuring minimum ventilation rates for various types of occupancy will be beneficial. In constrast to that many efforts have been made to reduce heat loss by improving thermal resistance of building envelope, little has been tried to reduce heat loss from infiltration. For achieving such an objective, measurement of air leakage rate will be pre-requisite as a diagnostic tool. A blower door system, a depressurization/pressurization method, was employed and it demonstrated a good potential for measuring airtightness performance of residential buildings. Based on the test results, annual energy savings for residential heating was estimated by reducing infiltration to a level of reasonably airtight or to a level of ASHRAE Standard 62-1989 for minimum ventilation.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.41-52
• /
• 2011

This study was carried out to investigate the effect of energy saving and sound insulation of building materials mixed with charcoal. To investigate the functionality of building based on the difference of construction materials, three different experimental buildings were constructed. They were buildings built with the conventional construction materials (A), the charcoal construction materials (B), and the charcoal-sericite construction materials (C). The study showed that energy consumption could be reduced approximately 9.5% and 14.5% by replacing A with B and C, respectively. Especially, it is revealed that the lower outdoor temperature was, the higher energy saving effect was. Also, after shutoff the boiler switch the decrease rate of room temperature of the one using B was lower than those of others using A and C so that the room temperature at the building using B was higher by $3.5{\sim}4.2^{\circ}C$ in the 1 meter air above the ground and by $4.4{\sim}5.4^{\circ}C$ on the floor surface after 12 hours passed. In the building noise test the heavy-and light-weight impact sound of the plate, represented by criterion of noise between floors in multi-story building, tended to decrease in the test sample containing charcoal.

• 월간 기계설비
• /
• s.278
• /
• pp.50-53
• /
• 2013

최근 온실가스 배출량 감축 의무화, 고유가 지속에 따른 에너지 시장의 불안, 화석연료의 고갈 등에 따라 신재생에너지에 대한 관심이 크게 증대하고 있다. 따라서 에너지효율 개선을 위해 신축 빌딩을 중심으로 신재생에너지 설비가 크게 주목받고 있다. 본지는 (주)정도설비가 서울시 송파구 신천동 일대 L건설현장에서 시공중인 '광역상수를 이용한 수온차 수축열 냉난방시스템'에 대해 알아본다. 이 시스템은 송파대로를 통과하는 광역상수도 배관(800mm)내 원수(50,000톤/일)의 일정 수온차를 이용해 열교환 후 냉난방에 이용하는 것으로, 건물의 전체 냉난방부하의 약 12%를 담당(설치용량 약3,000RT)할 예정이며 연간 6,800Mwh의 에너지를 절감할 수 있을 것으로 기대하고 있다.

• The Magazine for Energy Service Companies
• /
• s.26
• /
• pp.62-66
• /
• 2004

전미ESCO협회는 현재 미국 내에서 ESCO에 의해 사용되고 있는 M&V방식에 대해 질의하였다. 오늘날 측정평가(M&V)에 있어서 가장 기본적인 방법은 에너지 결정 변수 중의 하나가 측정되는 또는 어쩌면 하나도 측정되지 않는 ''A형 옵션''일 것이다. 이러한 프로젝트에서 절약 보증을 결정하는 데는 사전 설치분석법이 사용되고 있다. 그러나 요구 절감 가치에 대한 분쟁이 발생하는 상황에서 ''A형 옵션''은 상황을 ''조용히'' 해결하는 데 불충분한 정보를 제공할 수 있다. 계약에 충실히 따르는 인기있는 접근법은 설비별 계산서 분석 소프트웨어를 사용하여 건물 전체의 에너지를 분석하는 ''C형 옵션''이다. M&V를 단순화하는 이유는 조명프로젝트의 절약에 대한 이해가 클수록, 신규 설비 위주 프로젝트를 선호하는 고객과 에너지절감 위주 프로젝트를 선호하는 고객간의 대립으로 인한 M&V를 실행하는 비용과 위험성을 감안한 듯 하다.

• KIEAE Journal
• /
• v.13 no.4
• /
• pp.49-54
• /
• 2013

released by IEA, 2010, indicated that Korea's GDP, of 8 countries surveyed-Korea, Frans, Germany, Italy, Japan, the UK, the USA, and Australia-was the lowest, but the electric consumption per head was third, following America and Australia. Thus, our government has been striving to reduce energy usage and especially to lessen the energy used in buildings, proposing a variety of road maps such as 'building energy efficiency rating' and 'energy saving design standards of buildings'. Accordingly, this study investigated the effect of the items of machine part among EPI items on the energy saving rate. I measured energy usage by ECO2 program, for simulation program, that is used for the building energy efficiency rating. Result showed that items concerning control of pumps and fans had much more saving rate than the ones concerning efficiency of heater and cooler that had bigger scores assigned among EPI items. Result showed that items concerning control of pumps and fans had much more saving rate than the ones concerning efficiency of heater and cooler that had bigger scores assigned among EPI items. Therefore, I think that grades assigned to items in energy performance index need to be corrected.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.64-66
• /
• 2005

최근 국제유가의 급등으로 인하여 에너지절약을 위한 방안으로 에너지절약기기의 기술개발과 에너지절약시설에 대한 투자가 급증하고 있다. 이중 한 분야가 열병합발전시스템으로 기존시스템에 비해서 에너지절감과 환경오염방지에 기여하는 시스템이다. 최근에 실증 연구과제로 설치한 6kW마이크로가스열병합시스템의 설계 설치하여 1,032시간 운전한 결과를 소개하고자 한다.

• KIEAE Journal
• /
• v.12 no.4
• /
• pp.105-110
• /
• 2012

Recently, all of the world are facing with a serious environmental crisis of global warming due to excessive energy consumptions. The Korean Government, taking over 97% of dependence on foreign energy, has made various efforts on reducing energy and greenhouse gas emission under the motto of "Low-Carbon Green Growth". Since the building sector takes 24% of domestic energy consumption, many design standards and regulations on saving energy in new buildings have been established. However, applications of energy saving designs and techniques on the remodeling process at deteriorated buildings including educational ones have been lack. Under a situation where the number of deteriorated schools accounts for up to 50%, this paper evaluated the performances of factors for reducing energy at deteriorated middle school buildings through an energy simulation tool on a standard school model. As a result, among factors of insulation, window's SHGC, southern louver, indoor setup temperature, and system efficiency, all other factors except window's SHGC and southern louver proved contribute to reduce energy at deteriorated middle school buildings, compared with the baseline energy consumption.