• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.377-380
• /
• 2007

Formwork is a very important work in the construction. Various research and development about formwork has been going on, many methods are developed. And the effort to reduce the cost has been progressed at oversea. And a lot of attempts have been in motion in domestic field. But the systematic researches to apply to field are scarced. So, some problems pointed out at the stage of application. Therefore through comparison analysis of other formwork problems are derived and it's solution were suggested in this study.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.523-526
• /
• 2002

In the bearing wall systems, a form work has a lot of room that saves cost because it takes a substantial proportion of construction cost. Therefore the systemic and efficient methods are required in the form work. This study focuses on methods that enhance the quality and the productivity of form work and presents the kicker form as an alternative plan to simplify the form work through being modular and automatical it. Work sampling method is used for productivity measurement. It is expected that it will reduce the work process and improve the Qualify and the podructivity of construction.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.1
• /
• pp.175-181
• /
• 1993

콘크리트 구조체공사의 가장 큰 영향을 미치는 것은 거푸집공사이며, 구조체공사의 합리적 관리는 거푸집공사의 작업생산성에 관한 기초자료를 확보함으로써 가능하다. 본 연구에서는 거푸집공사의 과학적 관리기반을 구축하기 위하여, 구조체 기준층을 대상으로 작업측정을 하여 유로폼공법, 재래식 거푸집공법 등 주요공법의 생산성을 도출하였다. 또한, 거푸집공사의 주요 작업인 조립, 해체, 운반등 단위 공정의 소요작업 품을 산출함으로써, 작업개선을 위한 실용적인 자료를 제시하였다. 마지막으로 거푸집 면적이 생산성과 상관관계가 매우 높다는데 착안하여 소요작업품을 예측할 수 있는 상관관계식을 유도함으로써, 공정관리 및 기능공의 수급예측이 가능토록 하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.4 s.16
• /
• pp.88-95
• /
• 2003

Dewatering mold form get many holes on the surface to drain excessive water from combine concrete. While fiber is adhered to the forms inter surface, that makes it possible to improve concrete workability by draining excess water through the holes. We can expect the outer layer to solidify and to compact and get improvement of concretes durability. Maybe, it is valuable enough that dewatering mold form is put to practical use. On this study, the purpose is to obtain fundamental data for effective dewatering mold and properties of exposed concrete with the form, and ultimately, is to propose practical theory.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.187-191
• /
• 1999

공사현장에서 사용하고있는 거푸집의 대체를 오랫동안 연구 끝에 가로(60cm) 세로(120cm)의 규격의 PE-FORM을 개발한바 있으나, 일반 건설 현장에서 어떠한 형태의 구조물 시공을 위한 형틀을 제작함에 있어 통상적으로 기존 합판거푸집을 사용하고 있으나, 현재 국내에서 사용되고 있는 합판은 전량 수입에 의존하고 있어 외화낭비가 심할 뿐 아니라 평균 2-3회 정도밖에 사용하지 못해 자원 낭비를 초래하고 있으며, 합판 거푸집을 사용한 경우, 목공이 구조물의 형태에 맞춰 FORM을 일일이 제작해야하므로 시간과 비용의 소모가 크고 또한 FRP-FORM, EURO-FORM, STEEL-FORM GANG-FORM SYSTEM-FORM 등 구조물의 성격 형태에 따라 각종 개량된 거푸집을 사용한다고 해도 그것은 단순한 구조물의 형상을 만들어 내기 위한 형틀로써만이 이용되고 있을 뿐, 그 이상의 목적으로는 활용 할 수 없기 때문에 구조물의 특성상 방수 방식의 기능이 요구될 경우, 거푸집 해체 후 벽체의 내부 또는 외부에 액체, 몰탈, 에폭시, 쉬트 방수등 별도의 후속 공정이 추가되 번거로움이 있는 반면, 그 효과는 기대에 크게 미치지 못하고 있는 점을 착안, 수년 전부터 연구에 착수, 콘크리트 구조체의 방수ㆍ방식 문제를 해결 할 수 있는 획기적인 공법의 PE-PANEL의 요철형 거푸집 및 방수ㆍ방식공법을 개발해내는데 성공함으로써 지금까지 난제로만 여겨졌던 목재 거푸집의 대체 자재개발과 아울러 거푸집 겸 콘크리트 표면의 마감 처리을 동시에 해결한 매우 혁신적인 신기술이라 할 수 있다. (중략)

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.2
• /
• pp.136-144
• /
• 2011

The form-work operation of concrete structures is a major element determining the period and cost of construction projects. However, the selection of the appropriate form-work system is dependent on the experience of the site personnel only. In this paper, existing methods (Aluminum form, Sky deck) and new slab form-work methods (AFB: Aluminum panel Form with dropping Beam) were selected. Each method was estimated by means of Delphi techniques based on the qualitative analysis data. This paper suggests an evaluation methodology of slab form-work application in construction sites by calculating qualitative evaluation scores. The methodology finding quantified scores of qualitative criteria can be available to be applied to other construction operation evaluation methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.25-28
• /
• 2006

The contiguous construction in downtown area requires an appropriate substructure construction method since it results in the insufficient working spaces and frequent public resentment by noise and vibration. In particular, Top-down method usually is applied for downtown construction, and followed by several difficulties in casting the slab concrete for substructure. In this study, we focus on the improvement workability for substructure construction.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.536-543
• /
• 2001

Nowadays, with high-stoned and large-sized of structures, high-strength concrete is applicable to various methods. When high-strength concrete is used jointly with system form, seizing on the development of compressive strength at early age is very important in aspect of construction process. Because system form is stripped more faster than ordinary form. But, we have little data of compressive strength before system-form is stripped, and it isn't yet established that decision criterion of the time when system-form is stripped. So this paper deals with the development of compressive strength at early age before system-form is stripped. In this study, the experimental results indicate the boundary of curing temperature and mixing factor that is able to get needful early-strength in the application of slip-form method, and curing temperature must be kept over 15 degrees in winter season.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.56-68
• /
• 2019

An optimal selection of form-work is very important in the construction project in terms of construction cost and duration management. Also, it substantially affects the quality of the structure and the finishing work. However, in South Korea, the decision making on the selection of form-work has been based on the experience and intuition of construction practitioners not on the objective data or rational decision-making system. In order to solve the problem, several types of research on the selection of form-work has been processed. However, they did not consider the construction site condition, which is one of the most important factors for the selection of form-work. Thus, the objective of this study is developing the objective decision supporting system considering the site condition. This study provides the quantitative decision support model for optimal form-work based on construction site type. It is expected that the decision support model will help the practitioners decide optimal form-work based on the objective data. It will ameliorate the existing decision making process using experience and intuition. In addition, because the model considers site-conditions, it will provide more accurate and appropriate decision on the selection of an optimal form-work.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.105-113
• /
• 2010

Method or work type improvement is needed in relation to reducing cost and increasing efficiency by ensuring construction quality and reducing labor in the form work process. This would have a great influence on the entire construction process, and make the process of adopting materials and methods more rational and economic. Hence, this study aimed to develop a Synthetic Resins Euroform that could improve durability, water-proofing, sophistication, and organizational unity through the use of injection modeling. Accordingly, this paper first investigated various performance requirements and necessary techniques, and then verified feasibility by evaluating the physical safety and technical validity when it is applied to construction field. In addition, this study evaluated the constructability, safety performance, environmental performance, and systemic excellence in terms of maintaining convenience of Synthetic Resins Euroform. Moreover, to verify feasibility in the construction field, this study analyzed and evaluated the maximum stress by measuring the load and deformation of the space of the horizontal furring, which is attached to Euroform as an armature.