• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.9-16
• /
• 2005

The performance of satellite range measurement using tone method was analyzed in the presence of satellite link AWGN. The phase errors in range measurement are generated by AWGN of satellite up- and down-link and the degradations of satellite range measurement are dependent on the transmission mode and loop bandwidth of satellite measurement system. The analyzed effects for satellite measurement in presence of satellite link noise were also analyzed with the measured satellite range data via satellite range measurement system operating in satellite link AWGN. In RAU mode, the satellite range differences of 14.4 to 40.6 m were occurred according to the loop bandwidth of satellite range measurement system and the degradation of 0.3 dB compared with theoretical value was generated under condition of the signal-to-noise ratio of 43 dB. In RAU and TM mode, the performances of range measurement were approximately agreed to the that of RAU mode. In order to get the equal performance characteristics with RAU mode, the signal-to-noise ratio of satellite link for RAU and TM mode should be increased by signal power of 2.3 dB, which is a power loss due to transmission of telemetry signal.

• Journal of Digital Contents Society
• /
• v.11 no.2
• /
• pp.117-122
• /
• 2010

This is a study on the analysis of vibration mode of a laser doppler. We measure the vibration mode of a doppler and analyze each component, and want to estimate three dimensional properties from 2-dimensional data. The vibration mode relies on a range detector that uses a distance sensor. Since the outputs are determined by the measured distance, we want to study how 3-dimensional vibration mode is generated from 2-dimensional ones. The study will include the patterns of generating a 3-dimensional vibration mode as well as the relationship between the distance and the vibration mode.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.163-166
• /
• 1998

Toen 방식을 사용하는 거리 측정시스템의 잡음 및 간섭에 대한 열화 도를 분석한다. 위성 링크상의 잡음 및 다중 변조 방식에 의한 전송 신호간 간섭들로 인하여 위상차 측정에 열호가 발생하며, 열화 도는 ranging 측정 시스템의 잡음 대역폭에 의존한다. Ranging 측정 모드에서는 잡음 대역폭 8Hz, 4Hz 그리고 1Hz에 대하여 0.3dB 열화가 방샐하였으며, ranging 및 원격 측정 데이터 전송 모드에서는 대역폭에 따라 6.4dB, 4.2dB, 4dB가 발생하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.17-24
• /
• 2013

The localization accuracy in wireless sensor networks using ranging-based localization algorithms is greatly influenced by the ranging accuracy. Software implementation of HAL(Hardware Abstraction Layer) and MAC(Medium Access Layer) should seamlessly deliver the raw performance of ranging-based localization provided by hardware capability fully to the applications without degrading the raw performance. This paper presents the design and implementation of the software stack for IEEE 802.15.4a which supports normal ranging mode of the Nanotron's NA5TR1 RF chip. The experiment results shows that average ranging error rate with our implementation is 24.5% for the normal mode of the SDS-TWR ranging scheme.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.318-325
• /
• 2003

The new biotelemetry method and system that the installation and the treatment of equipment is convenient and the instantaneously detailed position of the fish attached the pinger is able to track comparatively easily had been developed, an availabilities of it were verified in water tank by using hydrophone and pinger. First of all, the receiving system for biotelemetry was calibrated so as to measure tracking of high precision or wide detection range. In the next place, the precision at narrow and wide beam array of receiving system by using hydrophone was investigated and the actual position was compared with measured hydrophone position. The mean standard deviations of the position by narrow beam array of receiving system were 6.4em in phase beam of fore-aft pair and 6.3em in starboard-port pair, and the wide beam array were 24em and 23em respectively. The precision of distance, position, and velocity at narrow beam array of receiving system by using pinger were investigated and the actual values were compared with measured values. The distance from receiving system to pinger was measured by the pinger synchronizing method, angle of direction of pinger was detected by the super short base line (SSBL) method. The three dimensional position of pinger to the receiving system was measured by combining of two kinds of methods (SPB method), the velocity of pinger was obtained with a differential of the three dimensional positions. The mean standard deviations of the distance by pinger synchronizing method in narrow beam array of receiving system was 1. 8 em, that of the position by SPB method was 7.7cm.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1412-1413
• /
• 2008

본 연구에서는 산업용 거리 계측기에서 정밀한 측정에 요구되는 오차 보정 기법을 제시하였다. 제시한 기법은 본 연구에서는 산업용 거리 계측기에서 보다 정밀한 측정을 위한 방법으로 측정하고자 하는 기법을 전원회로에서의 잡음, 공급 전원의 잡음, 공통모드에서의 잡음, 중간주파수에 섞여 있는 잡음 및 비교기에서의 오차 저감 기법을 제시하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1266-1273
• /
• 1991

Attenuation losses and repeater spans of single-mode optical fibers installed in the long hual optical transmission line were measured and analyzed. The average loss including splicing points was appeared to be 0.55 0.05dB/km and 0.59 0.01dB/km at 1300nm and 1550nm, respectively, and showed lager value at 1550nm window, The cause of loss increase at 1550nm range from the OTDR measurement was due to the inappropriate treatment of extra length of fiber at the splicing points. And average repeater span of domestic long haul line was 24 7km and 90% of total sampled repeater spans was within 31 km.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.218-229
• /
• 2003

A new biotelemetry method that the installation and the treatment of equipment is convenient and the instantaneously detailed location of the fish attached the pinger is able to track comparatively easily was developed. The receiving system in this biotelemetry method was advanced for track the detailed behavior of the fish by the miniature tracking pinger, because it was a burden to fish to add the pinger with the water temperature and the pressure sensor. By combining of the super short base line (SSBL) method to detect the direction of pinger and the pinger synchronizing method to measure the range from receiving transducer to pinger, the three dimensional locations of fish to the receiving transducer is gotten instantaneously. The receiving system is devised to realize the high precision or wide detection range by application of the basic design method for receiving system of biotelemetry developed by the present authors and the hydrophone array configuration. The measurement distance error in the pinger synchronizing method is minimized through the correction of which the deviation of transmission pluse period of pinger is caused by changing water temperature. A prototype system which is able to track the instantaneously detailed location of the fish by the SSBL and pinger synchronizing biotelemetry (SPB) method was produced.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.269-272
• /
• 1999

물체내부의 단층구조를 나타내는 B-모드 영상은, 물체의 내부 경계로부터의 반사신호를 직접 비디오 신호로 변환하여 그 진폭에 비례하는 휘도 또는 색상으로 나타내고 있다. 그러한 시간영역 파형에 의한 처리에 있어서는 각 신호가 시간적으로 근접해 있을 경우 영상화가 곤란하다. 본 연구에서는 B-모드 영상에 있어서 거리분해능을 향상시키기 위한 방법으로 캡스트럼법을 이용하는 것을 제안하고, 그 방법에 의해 음속이 알려진 얇은 물체의 두께를 보다 정확하게 측정, 표시함으로써 B-모드 영상화에 있어서의 분해능 향상 가능성을 보였다.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2024

For measuring the performance of passive sonars, we usually consider the maximum Detection Range (DR) under the environment and system parameters in operation. In shallow water, where sound waves inevitably interacts with sea surface or bottom, detection generally maintains up to the maximum range. In deep water, however, sound waves may not interact with sea surface or/and bottom, and thus there may exist shadow zones where sound waves can hardly reach. In this situation, DR alone may not completely define the performance of each sonar. For complete description of sonar performance, we employ the concept 'Robustness Of Detection (ROD)'. In the coastal region of the East Sea, the spatial variations of water masses have close relations with DR and ROD, where the two parameters show reverse spatial variations in general. The spatial and temporal analysis of the temperature by employing the Empirical Orthogonal Function (EOF) shows that the 1-st mode represents typical pattern of seasonal variation and the 2-nd mode represents strength variations of mixed layers and currents. The two modes are estimated to explain about 92 % of the variations. Assuming two types of targets located at the depths of 5 m (shallow) and 100 m (deep), the passive sonar performance (DR) gives high negative correlations (about -0.9) with the first two modes. Most of temporal variations of temperature occur from the surface up to 200 m in the water column so that when we assume a target at 100 m, we can expect detection performance of little seasonal variations with passive sonars below 100 m.