• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.1 s.4
• /
• pp.161-167
• /
• 2002

Forest fire danger period in nine Provinces (Gangwondo, Kyonggido, Gyeongsangnamdo, Gyeongsangbukdo, Jeollanamdo, Jeollabukdo, Jejudo, Chungcheongnamdo, Chungcheongbukdo) has turned out to be similar to recognize whether there are some differences between each Provinces, we used correlation analysis with number of occurrence and damage area by an interval of ten-day period. Based on this analysis, there was significant numbers of occurrence at all areas wish serious burns except Gyeongsangnamdo and Jejudo Provinces. Since persuasive power is insufficient as danger period of forest fire applies equally to nine Provinces, statistical analysis using number of forest fire occurrence and burned area are executed. And then, a analysis of variance(ANOVA) test of significance by an interval of ten day period is carried out. As a result of this analysis, there showed significant at 1% level for number of occurrence except Jejudo, and is also showed significant at 1% level for burned area except Gangwondo and Chejudo. Through regional correlation analysis for danger period, we classified three parts of Middle region (Gangwondo, Kyonggido, Gyeongsangnamdo, Gyeongsangbukdo, Jeollabukdo, Chungcheongnamdo, Chungcheongbukdo) Southern region (Gyongsangnamdo, Jeollanamdo) and Jejudo region. With respect to forest fire occurrence time, Middle region showed from the middle of February to first of May that amounts to 81% of entire occurrence in this region, and Southern region begins with at the last of January to the middle of April covering 71%. In terms of forest fire burned areas, it appears at the middle of February to the first of May, occupying 98% in Middle region, and Southern region showed burned areas from the last of January to the middle of April amounting to 82% of total occurrences.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.1
• /
• pp.39-47
• /
• 1987

The incidence of mulberry dwarf disease was surveyed on seventy two cocoon producing areas throughout the country from 1983 to 1984. There was a low tendency of incidence in Gyeonggi, Gangwon and Chungbuk, the northern parts of 37 degrees north latitude. However, in Chungnam and Gyeongnam, was a relatively high incidence observed. The most severe incidence areas of mulberry dwarf disease were found in Jeonnam, Jeonbuk and Gyeongbuk.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.31-31
• /
• 2021

2020년 8월 7일부터 8월 8일까지 호우는 용담댐, 섬진강댐, 합천댐 등 하류 유역의 농경지에 막대한 침수피해를 일으켰다. 특히 논의 인삼재배 지역은 피해가 컸다. 지역에 따라 내수유입, 제방월류, 배수로 역류, 용수로 유입 등 유입량 과다의 침수 현상을 나타냈다. 여기서 이들 다양한 유입량 요소를 고려하여 제내지의 침수심, 침수면적을 모의할 수 있는 물수지 모형을 구축하였고, 하천 수위관측자료가 있는 금산 지역에 적용한 예를 제시하고자 한다. 물수지 모형의 구성은 저류량은 유입량과 방류량으로 구성되며, 유입량은 자체유입, 용수로 유입, 배수로 역류, 제방월류 등으로 구성하였고, 용수로, 배수로의 수문은 원형, 구형 두 가지로 개도에 따라 오리피스 공식을 적용하는 것으로, 제방월류는 여수로 공식의 계수를 조정 적용하는 것으로 하였다. 제내지 내용적은 1:1,000 지형도에서 DEM 자료를 추출하여 생성하였고, 자체유입량은 ONE 모형에 의해 10분 단위로 모의하는 것으로 하였다. 모형 적용 결과는 제원리 제내지 경우이며, 8월 6일 부터 8월 10일 까지 유역면적 322.1ha인 제내지의 10분 간격 물수지 분석 결과, 현장의 침수흔적 조사의 최고수위가 일치하도록 배수문과 배수통관의 방류시 개도율을 조정하며 분석하였다. 이 상태의 침수위 모의 분석결과는 월류고 EL.133.86 m, 월류길이 29m로 나타났다. 10분 최대 강우량 9mm, 1시간 최대 강우량 19mm, 총 강우량 225mm(724,725m³)였고, 10분 최대 유입량 5.619m³/s(3,371m³), 평균 1.264m³/s(758m³), 총545,933m³였다. 용수로 유입은 없었고, 배수문 역류 유입량은 13시간 50분 동안, 10분 최대 6,836m³, 총 28.26만m³였고, 제방월류 유입량은 9시간 30분 동안, 10분 최대 7,212m³, 총 33.15만m³였고, 배수문 방류량은 3일 20시간 20분 동안, 10분 최대 19,932m³, 총 116.13만m³였다. 하천수위는 최고 EL.134.45m, 최소 EL.128.51m, 평균 EL.130.69m였고, 내수위는 최고 EL.134.05m, 최소 EL.129.00m, 평균 EL.131.02m였다. 최고 침수위 EL.134.05m일 때 DEM으로부터 침수면적은 38.88ha로 분석되었다. 내수 유입에 의한 침수면적 19.54ha를 빼면 10.71ha가 배수문과 제방월류를 통해 유입된 수량으로 침수된 것으로 분석되었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.307-314
• /
• 1984

One hundred winter wheat cultivars obtained from the world collections in Korea were planted in 1982. Stomatal frequency of flag leaf of these cultivars were measured, and among these 21 cultivars which showed different stomatal frequency were selected to investigate the relationship of their stomatal frequencies and other characters such as culm length, heading date and characters related to leaf. Stomatal frequency of flag leaf of 100 cultivars different significantly, ranging from 51 to 90 stomata mm$^{-2}$ for the adaxial and 35 to 65 for the abaxial surfaces of leaf. Stomatal frequency was always greater on the adaxial than on the abaxial surface. Mean ratios (adaxial/abaxial) were 1.5 for the flag leaf and 1.3 for the from second to fouth leaves. Among 21 cultivars examined, stomatal size which measured guard cell length varied from 38.5 to 46.6$\mu$ for adaxial surface and from 39.4 to 49.4$\mu$ for abaxial. A negative correlation was obtained between stomatal frequency and its size. Stomatal frequency decreased from flag (L$_1$) to lower leaves, progresively. Stomatal frequency on L$_1$ sheath was compared to those on L$_3$ and L$_4$ abaxial surface of leaf. More stomatal frequency on top and center of adaxial surface showed than that on basal part of a leaf but the abaxial surface resulted in reverse of adaxial one. Cultivars with high stomatal frequency on flag leaf showed higher stomatal frequency on the other leaves and sheaths. Positive correlation between stomatal frequency and other characters such as, culm length, heading date and chlorophyll content showed statistical significance, whearas it revealed the negative correlation of stomatal frequency with leaf weight, leaf area and stomatal aperture. However, no relation appeared between stomatal frequency and leaf vein.

• Journal of Ginseng Research
• /
• v.27 no.4
• /
• pp.202-206
• /
• 2003

This study was conducted to compare the growth status of aerial parts, photosynthesis and microclimate between fixing light transmittance (Control) and changing light transmittance (C.L.T.) during ginseng growing seasons. Control showed 8％ light transmittance rate during growing seasons. But C.L.T. showed 18％ light transmittance rate during early (April-June) and late growth stage (September-October) and 6％ light transmittance rate middle growth stage(July-August). Air temperature, leaking water rate and soil water content of C.L.T. was higher than those of control during early and late growth stage. But Air temperature, leaking water rate and soil water content of C.L.T was lower than those of control during middle growth stage C.L.T. exhibited superiority in survival ratio, stem diameter, stem length, L.A.I. and stem angle compared to control. Chlorophyll content of C.L.T. was lower than that of control but S.L.W., stomatal opening and photosynthetic rates of C.L.T. was higher than those of control. Also Alternaria blight disease and defoliation of C.L.T. was lower than those of control.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.251-262
• /
• 2009

In this research dairy cattle barn facilities what are 4,198 houses hold over 50 heads were surveyed by scale and province. Full-time farms hold over 50 heads breed total 344,514 heads. Each of Farms holds 50 to 99 heads were 79.8 percent and breed average 82.1 heads. Dairy cattle barns were constructed september 1995 averagely. Each of barns have $1,740.0\;m^2$ scale. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, mooring+litter ground type 17.3% and other types 4.4%. The litter barn type was popular in small farms. But in large farms, freestyle type was popular than small farms. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, moohng+ltter ground type 17.3% and other types 4.4%. Type of dairy cattle robotic milking system was pipeline 41.5%, herringbone 22.8% and tandem 35.8%. The pipeline type was popular in small farms which have 50~99 heads. But in large farms which have over 200 heads, tandem type was popular than small farms. Proportion of floor type of dairy cattle barn was almost litter type 94.9%. Scraper type was popular in large farms than in small farms. Proportion of roof type of dairy cattle barn was slate 32.5%, vinyl 16.3%, sunlight 11.1%, panel 10.9, zinc plate 8.8 and steel plate 8.3%. Roof type was lots of slate type before 1995. But vinyl type is increasing after 1995. Proportion of wall type of dairy cattle barn was almost open type 83.3% and winch-curtain 26.8%. Utilization period of dairy cattle barn was 9.2 years about milker, 7.9 years about automatic feeder, 9.2 years about waterer and 10.4 years about electric facilities. In this results, there were lots of improvements about automatic feeder.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.