• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.110-119
• /
• 1994

The Robust Controller for scan-loop is designed using LQG/LTR Methodology. The design and analysis of spiral, rosette and conical scan patterns are discussed. The perfermance and robustness of the LQG/LTR controller are analyzed through experiments and cpmpared with those of the P-controller. Especially to improve the scan performance at large look angle, the cage coil output is linearized using a binomial equation. It is demonstrated that the scan-loop system by the LQG/LTR control is very robust to phase uncertainties.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.128-135
• /
• 1999

A driving simulators of aircraft and vehicle may consist of hydraulic power systems with many single-rod cylinders. The single-rod hydraulic systems are convenient but need more robust control scheme in order to achieve a reliable performance against the wide range of operating disturbances and the inherent model uncertainties. $H_{\infty}$ control scheme was implemented to the 2 degree-of-freedom hydraulic device similar to the simple driving simulator. With the reasonable disturbances from sensor, base and pump and also with the linearization of model, the simulation and experimental results showed good agreements.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.438-444
• /
• 1997

Recently, optical disk drives are increasingly demanded to have higher speed as well as high information density, especially for applications like CD-ROM drives. To this end, improvement of their optical pick-up structure and control is recognized the very challenging issue. In this paper, the 2-D motion of the pick-up is first analytically modelled to identify the cause and effect of the troublesome cross coupling between auto-focusing and tracking directions. Subsequently, the overall system equations are derived to include the dynamics of the related components in the auto-focusing servo system. While its unmeasurable parameters being estimated by the least square error method, a simple but decent linear model can be obtained within its operating frequency range. To design the high speed and robust positional servo controller, the design specifications are detailed and H$\sub$.inf./ control method is employed based on the simple model. Using the pickup in a commercial 8 fold speed CD-ROM drive as an example, performance of the designed controller is verified by realtime experiments.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.207-210
• /
• 2004

오늘날 모바일의 발전과 함께 지속적으로 모바일 컨텐츠들에 대한 연구가 급속히 증가되어 지고 있다. 특히 모바일상에서 아바타나 캐리커쳐 시스템에 관한 연구가 활달히 진행되고 있으며, 이에 필요한 기반기술인 얼굴 영상의 추출에 대한 연구가 필수적으로 병행 되어지고 있다. 본 논문에서는 이러한 흐름에 맞추어 핸드폰용 카메라에서 사용 가능한 얼굴추출 알고리듬을 제안한다. 얼굴의 추출을 위해서 ACM을 응용하였으며, 이에 대한 초기의 제어점 선택을 위하여 T-S 색상 공간을 분석한 후에 마할라노비스 거리측정을 하였다. 또한 ACM의 외부에너지를 일반적으로 많이 사용하는 기존의 에지를 이용한 방법이 핸드폰용 카메라의 특성강 조명의 영향과 화질의 연화로 의해 정확하게 추출되어지지 못하는 단점을 보완하고자 얼굴 영역 면적의 변화량 측정 방법을 사용함으로 조명의 영향에 강인하도록 하였다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.442-449
• /
• 2003

This paper presents a robust hybrid control system for seismic response control of a cable-stayed bridge. Because multiple control devices are operating, a hybrid control system could alleviate some of restirctions and limitations that exist when each system is acting alone. A LQG algorithm with on-off control scheme, H$_2$ and H$_{\infty}$ control algorithms with various frequency weighting filters are used to improve the controller robustness of the active control part in the hybrid control system. The numerital simulation results show that control performances of robust hybrid control systems are similar to those of the hybrid control system with LQG algorithm. Furthermore, it is verified that robust hybrid control systems are more robust than the hybrid control system with LQG algorithm and there are no signs of instabilities in the $\pm$5％ stiffness matrix perturbed system. Therefore, the proposed hybrid control system have a good robustness for stiffness matrix perturbation without loss of control effectiveness.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.4
• /
• pp.175-182
• /
• 2018

In recent years, micro-grid has been widely focused on the fields of renewal energy systems. This paper proposes a novel robust power converter control against arbitrary electric load changes for islanded micro-grid topology. First, we provide a state-space representation of our micro-grid model including power converter and electric load circuit. And then a state feedback control method is applied to construct a nominal control framework. Next, we propose a robust adaptive control law to enhance a control performance against unexpected load perturbation. In addition, we analytically investigate a passivity property for the micro-grid model and carry out computer simulation to demonstrate superiority and reliability of the proposed control methodology.

• The Journal of Korea Robotics Society
• /
• v.16 no.1
• /
• pp.72-78
• /
• 2021

This paper presents a robust impedance control of high-DOF robot based on disturbance observer(DOB). A novel DOB is derived by considering the residual disturbance caused by the difference between actual disturbance and disturbance decoupling input which utilizes the estimated disturbance. It focuses on the elimination of the residual disturbance and improvement of the control performance as well as the good estimation of disturbances. In the control of high-DOF robot, numerical dynamic model, which is conducted by a software based on dynamics, is utilized because the analytical model of high-DOF robot is difficult to be obtained. The simulation of high-DOF robot with numerical dynamic model is provided to verify the performance of the proposed controller.

• The Journal of Korea Robotics Society
• /
• v.19 no.1
• /
• pp.8-15
• /
• 2024

This paper proposes a linear model predictive control of 6-DOF remotely operated underwater vehicles using nonlinear robust internal-loop compensator (NRIC). First, we design a integrator embedded linear model prediction controller for a linear nominal model, and then let the real model follow the values calculated through forward dynamics. This work is carried out through an NRIC and in this process, modeling errors and external disturbance are compensated. This concept is similar to disturbance observer-based control, but it has the difference that H_∞ optimality is guaranteed. Finally, tracking results at trajectory containing the velocity discontinuity point and the position tracking performance in the disturbance environment is confirmed through the comparative study with a traditional inverse dynamics PD controller.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.95-99
• /
• 2005

This paper presents an accurate recovery method of the reference clock which is needed for network synchronization in two-way satellite multimedia systems compliant with DVB-RCS specification and which use closed loop method for burst synchronization. In these systems, the remote station transmits TDMA burst via return link. For burst synchronization, it obtains reference clock from program clock reference (PCR) defined by MPEG-2 system specification. The PCR is generated periodically at the hub system by sampling system clock which runs at 27MHz $\pm$ 30ppm. Since the reference clock is recovered by means of digital PLL(DPLL) using imprecise PCR values due to variable random jitter, the recovered clock frequency of remote station doesn't exactly match reference clock of hub station. We propose a robust recovery method of reference clock against random delay jitter The simulation results show that the recovery error is remarkably decreased from 5 clocks to 1 clock of 27MHz relative to the general DPLL recovery method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.2
• /
• pp.58-69
• /
• 1998

A contrp; suste, fpr SCARA robot is designed for implememting a robust dynamic control algorithm. this study forcuses on the use of DSPs in the design of joint controllers and interfaces in between the host cotroller and four joint controllers and in between the joint controllers and four servo drives. The mechanical body of SCARA robot and the servo drives are selected from the commercially available ones. The four joint controllers, assigned to each joint one by one, are combined into a common system through a mother board hardwarewise and through the global memeory softwarewise. The mother board is designed to connect joint controllers onto the board through the slots adopting PC/104 bus structures. And, the global memory stores the common data which can be shared by joint controllers and the host computer directly, which virtually combines the whole system into one. To demonstrate the performance and efficienty of the sytem, a robust inverse dynamic algorithm is proposed and implemented for a faster and more precise control. The robust inverse dynamic algorithm is basically derived from an inverse dynamci algorithm and a PID compensator. Based upon the derived dynamic equitions of SCARA robot, the inverse dynamic algorithm is intitially implemented within 0.3 msec of the control cycle in this system. The algoithm is found to be not accurate enough for the high speed and precision tasks due to inherent modelling errors and time-varying factors. Therefore, a variable PID algorithm is combined with the inverse dynamic algorithm to support robustness of control performance. Experimental datfor the proposed algorithm are presented and compared with the result obtained from PID and inverse dynamic algorithm.