• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.19.2-19.2
• /
• 2009

ITO는 n형 반도체 특성을 가지며 이와 동시에 높은 가시광투과율과 낮은 전기전도도를 가짐으로써 다양한 투명전극소재와 가스 검출센서로 많이 활용되고 있다. 본 연구에서는 RF magnetron sputtering 법을 이용하여 상온에서 glass 기판 위에 두께 100nm로 ITO 그리고 하층 ITO 박막 (두께 50 nm) 위에 층간 금속 (두께 5 nm)을 증착하고 다시 상부 ITO 박막 (두께 45 nm)을 증착하여 3층의 적층형 박막센서를 제작하였다. 층간 금속으로는 Au와 Cu를 각각 사용하였다. 박막 증착 후엔 진공분위기에서 $150^{\circ}C$, $300^{\circ}C$로 열처리 과정을 거쳐 열처리 전후의 물성 및 감지특성을 비교해보았다. 분석방법으로는 XRD, SEM, AFM, Hall effect 장치 등을 이용하였다. 분석 결과 $300^{\circ}C$에서 진공 열처리한 ITO/Au/ITO(IAI) 박막센서가 높은 결정화도 와 전기적 특성이 나타났으며, 0 에서 1000ppm 까지의 메탄가스의 민감도 측정에서도 열처리된 IAI 박막센서가 기존의 ITO 박막센서보다도 약 70% 정도 향상된 민감도를 나타내었다.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.154-162
• /
• 2022

Purpose: The government intends to come up with measures to revitalize safety management at construction sites to shift safety management at construction sites from human capabilities to system-oriented management systems using advanced technologies AIoT and Mobile technologies. Method: The construction site safety management monitoring system using AIoT and Mobile technology conducted an experiment on the effectiveness of the construction site by applying three algorithms: virtual fence, fire monitoring, and recognition of not wearing a safety helmet. Result: The number of workers in the experiment was 215 and 7.61 virtual fence intrusion was 3.5% compared to the number of subjects and 0.16 fire detection were 0.07% compared to the subjects, and the average monthly rate of not wearing a safety helmet was 8.79, 4.05% compared to the subjects. Conclusion: It was found that the construction site safety management monitoring system using AIoT and Mobile technology has a valid effect on the construction site.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1848-1850
• /
• 2004

변압기에 사용되는 절연유의 열화정도를 변압기의 운전정지 없이 실시간으로 측정할 수 있는 전기용량을 이용한 센서를 개발하였다. 개발된 전기용량형 센서는 3-전극형의 구조와 변압기에 센서의 외부상자가 접지 될 때 2중의 정전차폐가 되도록 하여 외부로부터의 잡음에 영향을 받지 않도록 하였다. 또한 변압기에서 절연유의 온도변화에 따른 유전율 변화를 보상하기위하여 기준용 센서와 측정용 센서를 한개의 변압기에 장착함으로 온도보상이 되도록 하였다. 제작된 센서는 변압기에서 절연유의 사용기간에 따른 유전율의 변화를 정확히 측정하였으며, 절연유의 체적저항의 변화도 감지 할 수가 있다. 따라서 센서에서 출력되는 신호를 phase sensitive detector를 사용하여 유전율의 변화로 혹은 체적저항의 변화로도 나타내 보일 수가 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.407-408
• /
• 2012

본 논문에서는 코일을 이용한 비접촉 방식의 맥박 측정 시스템의 효율적인 설계 방안을 제시한다. 인덕턴스와 커패시턴스의 값에 따라 발진 주파수가 변동되는 콜피츠 발진기를 사용함으로써 혈류의 흐름에 따른 인덕턴스의 변화를 측정하였다. 실험은 2가지로 구성되며 첫 번째는 코일 위에 손가락을 올려놓은 상태로 측정하는 방식이며 두 번째는 반지 형식으로 감겨진 코일을 손가락 끝에 착용하였을 때이다. 코일 내부에서 가장 높은 자력선 밀도를 가지므로 첫 번째 방식보다 두 번째 방식에서 더 높은 투자율의 변화를 감지할 수 있다. 결과적으로 광용적맥파 신호와의 비교 실험을 통하여 맥파로서의 유의성을 검증하였다.

• Composites Research
• /
• v.23 no.2
• /
• pp.24-30
• /
• 2010

Interfacial evaluation and hydrophobicity of Ni-nanopowder/epoxy composites were investigated for self-sensing and actuation. Contact resistance and resistivity were measured using gradient micro-specimens. The actuation of the composites in the electromagnetic field was studied with three wave functions, i.e., sine, triangle and square functions. Due tothe presence of hydrophobic domains on the heterogeneous surface, the static contact angle of Ni-nanopowder/epoxy nanocomposite wasabout $100^{\circ}$, which was rather lower than that for super-hydrophobicity. The dynamic contact angle showed the similar trend of static contact angle. Ni-nanopowder/epoxy composite was responded wellfor both self-sensing and actuation in electromagnetic field due to the intrinsic metal property of Ni-nanopowder. Displacement of the actuator of Ni-nanopowder/epoxy composite was evaluated to obtain the maximum and the optimum performance using laser displacement sensor as functions of the wave type, frequency, and voltage. Actuation of Ni-nanopowder/epoxy composites also increased as functions of applied frequency and voltage. Actuated strain increased more rapidly at sine wave with increasing voltage compared to those of triangle or rectangular waves.

• Composites Research
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2013

CNT-polypropylene (PP) composites were compounded by solvent dispersion method with uniform dispersion by using twin screw extruder. Damage sensing effects based on conductive carbon nanotubes (CNT) were evaluated to monitor the internal damage of CNT-PP composites using electrical resistance measurement. Mechanical and interfacial properties of CNT-PP composites were investigated and compared with neat PP. The mechanical properties of PP matrix were improved after adding CNT, because of the reinforcing effect of CNT fillers. In order to monitor the internal damage of CNT-PP composite, the change in electrical resistance of the composites was measured under fatigue loading and bending tests. CNT fillers exhibited good sensing under electrical resistance measurements. It is shown that CNT-PP composites with low CNT contents allow identifying critical cyclic loading, which are found to be accompanied with the internal failure.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.264-271
• /
• 2011

At the Jangheung multipurpose dam, which is on the Tamjin River, a trapping and trucking operation was established to maintain continuous upstream migration of fish,. To facilitate fish gathering, installation of an effective fishing trap was required. In this study, we evaluated the fish trap, established at the Jangheung dam, using PIT (Passive Integrated Transponder) telemetry. A total of 254 individuals from 15 species were monitored. Among these tagged species, 36 individuals from 6 species (Carassius auratus, C. cuvieri, Zacco temminckii, Z. platypus, Pungtungia herzi, and Pseudobagrus koreanus) were detected; a 14.2% detection rate. C. auratus recorded the highest detection rate of 44.2% while P. herzi was 14.3%. Z. temminckii and Z. platypus showed relatively low detection, 5% and 7.7% respectively. Some of individuals from C. auratus and Z. platypus did not pass through the antenna at the first attempt but were continuously detected on multiple days. There were no statistical differences in body size (total length, standard length and body weight) of individuals that did or did not swim into the trap (Mann-Whitney U test, p>0.05). Fish mainly swam into the trap during outflow of water from the dam (Mann-Whitney U test, p<0.001) and showed a higher detection frequency in daytime than nighttime (Mann-Whitney U test, p<0.001). Thus, for fish movement into the trap, external factors such as outflow from dam and time of day have important roles. Based on detection rate, not all fishes showed upstream migration but represented selective migration. Consequently, the establishment of flexible outflow strategies that take into consideration ecological characteristics of fishes should required for improving the efficiency of fishway.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.27-34
• /
• 2024

This study was conducted to examine the feasibility of using Fe-activated wood-derived biochar as a conductive filler for manufacturing cement-based strain sensor. To evaluate the compressive and electrical properties of cement composite with 3% Fe-activated biochar, three cubic specimens of size 50 x 50 x 50mm³ and three prismatic cement-based sensors of size 40 x 40 x 80mm³ were prepared respectively. The four-probe method of electrical resistance measurement was used for cement-based sensors. For cement-based sensors with FE-activated biochar, the conductive performance such as electrical resistance and impedance under different water content and repeated compression was investigated. Results showed that the fractional changes in the DC electrical resistivity of cement-based sensors increase with increasing time and the maximum fractional changes in the resistivity decrease with increasing the moisture contents during 900s. At moisture content of 7.5% range, the conductive performance of cement composite including 3% Fe-activated biochar as a conductive filler showed the most stable, while the strain detection ability tended to decrease somewhat as the repeated compressive stress increased between repeated compressive strain and fractional change in resistivity (FCR).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.29-38
• /
• 2012

The data quality and measurements along consecutive detector stations can vary much even in the same traffic conditions due to variety in detector types, calibration and maintenance effort, field operation periods, minor geometric changes of roads and so on. These faulty situations often create 10% or more of inherent difference in important traffic measurements between two stations even under stable low flow condition. Low detection rates(DR) and high false alarm rates(FAR) therefore sets in among many popular Automatic Incident Detection Algorithms(AIDA). This research is two-folded and aims mainly to develop a new AIDA for uninterrupted flow. For this purpose, a technique which utilizes a Simple Arithmetic Operation(SAO) of traffic variables is introduced. This SAO technique is designed to address the inherent discrepancy of detector data observed successive stations, and to overcome the degradation of AIDA performance. It was found that this new algorithm improves DR as much as 95 percent and above. And mean time to detection(MTTD) is found to be 1 minutes or less. When it comes to FAR, this new approach compared to existing AIDAs reduces FAR up to 31.0 percent. And capability in persistency check of on-going incidents was found excellent as well.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1203-1205
• /
• 1987

가솔린 엔진용 전자 제어 에뮬레이션 시스템은 엔진의 운전 상태를 알려 주는 각종 센서로 감지한 정보를 A/D변환기를 통해 마이크로프로세서에 입력시키고, 이 정보를 이용하여 운전 상태를 분석한 후 엔진이 푤요로 하는 연료량, 점화시기, 배기가스의 재순환량, 공회전수 등을 전자적으로 제어하여 엔진의 최적제어를 실현시킴으로서 연료소비율 및 배기가스 중 공해물질 함량을 감소시키기 위한 장치이다.