• Journal of Applied Biological Chemistry
• /
• v.52 no.1
• /
• pp.8-14
• /
• 2009

This study was conducted to assess the effects of diet food containing Jerusalem artichoke's inulin, lotus leaf, and herb on weight and body fat. Participants in this study were selected based on the following criteria: BMI over $25kg/m^2$, body fat percentage higher than 25%, abdominal obesity level of 0.85 measured by body composition measurement unit (ZEUS 9.9 PLUS, Korea) total 24 female and male university students over 20 of age were assigned to two different groups: control group and diet group and the study was carried out for 30 days. When we measured what the tester's body weight and height, we used an automatic measure machin which is called IMI-1000 from Immanuel company and when we measured what the hip and wist circumference, we used a tape measure. When we measured body mss index (BMI), body Int, body mass, lean mass, waist/hip ratio (WHB), obesity index, we used a ZEUS9.9 PLUS-Korea which is based on bioelectrical impedance analysis, The food intake was checked by means of diet record method to be input into CAN program in order to analyze nutrient intake. Our findings indicated that the diet group, as compared to the control group, lost weight of approximately 2.5 kg and showed statistically significant difference. In addition the level of body Int, muscle, abdominal obesity, obesity, waist and bottom measurement all showed significant decrease after study period. However, there was no big difference in body fat percentage because both body fat level and muscle level dropped together, Putting all these together, diet food in this study containing Jerusalem artichoke's inulin, lotus leaf powder, and herbs powder including nettle, eucalyptus was found to be effective in significant reduction of weight and body fat and obesity-related body indicators. Also, it is considered that this diet food has potential to prevent and improve effectively obesity from abnormal fat accumulation.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.471-490
• /
• 2016

This study investigated provenance of raw materials and making technique of lime-based materials used in the tomb barriers of the Yesan Mokri tombs from Joseon dynasty on the basis of analysis to material characteristics and physical properties. In the barrier materials, dry density and porosity are the highest value ($1.82g/cm^3$) and the lowest value (25.20%) in the south wall of No. 1 tomb, respectively. Dry density and porosity are inversely proportional in all barrier materials, but unconfined compressive strength, which is the highest value of $182.36kg/cm^2$ in the No. 2 tomb, does not show an interrelation with porosity and density. Mineral components in the lime-soil mixtures of the tomb barrier are mainly quartz, feldspar, mica and calcite about 200 to $600{\mu}m$ size with yellowish brown matrix. Hydrotalcite and portlandite are detected in the lime mixture, and kaolinite in the soils. The lime materials of the tomb barrier occurred in large quantities weight loss and variable endothermic peaks caused by decarbonization reaction of $CaCO_3$ in the range from 600 to $800^{\circ}C$ in thermal analysis. Making temperature of lime for the tomb barrier is presumed approximately about $800^{\circ}C$ based on the occurrences, compositions and thermal analysis. The tomb barriers are revealed to very wide composition ranges of major elements and loss-on-ignition (22.5 to 33.6 wt.%) owing to mixture of the three materials (lime, sand and clay). It is interpreted that low quality construction technique was applied as the limes are very heterogeneous mixture with aggregates, and curing of the lime was poorly processed in the tomb barriers. Possible limestone sources are distributed in many areas around the Mokri site where limestone conformation and quarries for commercial production are found within Yesan and Hongseong areas. Therefore, we estimated that raw materials were possibly supplied from the local mines near the Mokri site.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.2
• /
• pp.63-69
• /
• 2008

As a basic study on the creation of artificial tidal flats using dredged sediments, the pilot-scale artificial tidal flats with 4 different mixing ratio of ocean dredged sediment were constructed in Nakdong river estuary. The phragmites australis was transplanted from the adjacent phragmites australis community after construction, and then the survival and growth rate of the planted phragmites australis were measured. Also the changes of soil chemical oxygen demand (COD), ignition loss (IL), and the heterotrophic microbial numbers were monitored. The survival rate of the planted phragmites australis decreased as the mixing ratio of dredged sediment increased but there was little difference of length and diameter of the shoots. 30% of COD and 9% of IL in the tidal flat with 100% dredged sediment decreased after 202 day, however, fluctuations of COD and IL concentrations were also observed possibly due to the open system. It was suggested that the construction of tidal flats using ocean dredged sediment and biological remediation of contaminated ocean dredged sediment can be possible considering the growth rate of transplanted phragmites australis, decrease of organic matter and increased heterotrophic microbial number in the pilot plant with 100% dredged sediment. However, the continuous monitoring on the vegetation and various environmental factors in the artificial tidal flat should be necessary to evaluate the success of creation of artificial flats using dredged sediments.

• Resources Recycling
• /
• v.9 no.1
• /
• pp.36-43
• /
• 2000

This study was carried out for treatment and reuse of inorganic sludge from Fenton process at B dyeing wastewater treatment plant. The parameters for pilot-scale treatment system were derived from the results of this study. It was found that $COD_{cl}$ of the treated effluent became lower than 100 mg/l approximately on the optimal reaction condition. 2nd sludge which was generated after redissolving sludge was analyzed, and it showed that reduction ratio of ash in 2nd sludge and total dry sludge weight in comparison with current sludge were 85% and 65%. Also Fe salt in sludge was redissolved about 90~95% of initial Fe by weight. It was estimated almost ￦350,000,000 for sludge reuse process. It was estimated saving of about ￦1,300,000 per day (￦420,000,000 per year) in operating cost based on 30,000 $m^3$/d treatment, which these were about ￦430,000 per day in chemical, ￦1,100,000 per day in sludge transportation and ￦200,000 per day in equipment maintenance. Payback period with interest charge for investment cost was estimated about 10.5 months. Also, net present value (NPV) was ￦792,000,000 and internal rat of return (IRR) was about 110%.

• Journal of Nutrition and Health
• /
• v.43 no.3
• /
• pp.273-284
• /
• 2010

The purpose of this study was to investigate the effects of weight control program on dietary habits and blood composition in obese middle-aged women. The program consisted of nutrition education, physical exercise and nutrition counseling was conducted for 12 weeks. Participants of the preliminary study were 255 obese women, among which 82 women participated in the nutrition education program. We evaluated the anthropometry, blood lipid profiles, dietary habits of obese women before and after the nutrition education. Dietary habits of the subjects were significantly improved in regularity of having breakfast (p < .05), the frequency of eating snack after dinner (p < .001), eating out (p < .01) and the speed of meal (p < .05) after the program. There was significant decrease in total cholesterol, triglyceride, LDL-cholesterol and systolic pressure of the subjects after nutrition education. Changes of atherogenic index and diastolic pressure were not significant, but had a tendency to decrease. All of the anthropometric outcomes except lean body mass such as BMI, percent body fat, fat mass, and WHR were significantly decreased after weight control program. These findings show that weight control program including nutrition education and counseling can improve dietary habits and weight control pattern, and lead the authors to recommend that public health organizations and dietetic professionals should educate obese women on practical strategies for an effective weight management.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.149-158
• /
• 2008

This study was estimated on performance of deicers, corrosion inhibitors and low corrodible deicer used for removal of snow or ice on the road and on influence on structure. The weight loss rate after freezing and thawing of low corrodible deicer is lower than one of deicer, corrosion inhibitors and these combination. Relative dynamic elastic modulus of all except water, low corrodible deicer and NaCl+JF-1004 was radically reduced after freezing and thawing 150 cycles. And concretes after freezing and thawing were showed severe surface damage. It was found that individual use of low corrodible deicer and corrosion inhibitors had a problem of field application because of lack of early ice melting effect and considerably low durability. Products combined with NaCl was showed rapid weight loss by metal corrosion. Therefore, It will need to circumspectly select combination of deicers having low effect on concrete pavement and bridge if possible.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.209-215
• /
• 2013

This study is aimed to identify the method to use the CaO-$Al_2O_3$ system of rapidly cooled steel making slag (RCSS) as the environment-friendly inorganic accelerating agent by analyzing its physical and chemical properties. The fraction of rapidly cooled steel making slag is distinguished from its fibrous, and the contents of CaO and $Fe_2O_3$ are inversely proportional across different fractions. In addition, as the content of CaO decreased and the content of $Fe_2O_3$ increased, the loss ignition tended to become negative (-) and the density increased. The pore distribution by mercury intrusion porosimetry is very low as compared to the slowly cooled steel-making slag, which indicates that the internal defect and the microspore rate are remarkably lowered by the rapid cooling. To analyze the major minerals the rapidly cooled steel-making slag, XRD, f-CaO quantification and SEM-EDAX analysis have been performed. The results shows that f-CaO does not exist, and the components are mainly consisted of $C_{12}A_7$ and reactive ${\beta}-C_2S$.

• Clean Technology
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2018

In order to cope with environmental problems and climate change caused by fossil fuels, renewable energy supply is increasing year by year. Currently, waste energy accounts for 60% of renewable energy production. However, waste has a lower calorific value than fossil fuels and contains various harmful substances, which causes serious problems when applied to power generation boilers. In particular, the chlorine in the waste fuel increases slagging and fouling of boiler heat exchangers, leading to a reduction in thermal efficiency and the main cause of high temperature corrosion, lowering facility operation rate and increasing operating cost. In this study, the high temperature corrosion experiments of superheater materials (ASME SA213/ASTM A213 T2, T12 and T22 alloy steel) by alkali chlorides were conducted, and their corrosion characteristics were analyzed by the weight loss method and SEM-EDS. Experiments show that the higher the temperature and chloride content, the more corrosion occurs, and KCl further corrodes the materials compared to NaCl under the same condition. In addition, the higher the chromium content of the material, the better the corrosion resistance to the alkali chlorides.

• Korean Journal of Cognitive Science
• /
• v.17 no.2
• /
• pp.75-102
• /
• 2006

Three experiments were conducted using a verification task to examine good and poor readers' generation of causal inferences(with because sentences) and contrastive inferences(with although sentences). The unfamiliar, critical verification statement was either explicitly mentioned or was implied. In Experiment 1, both good and poor readers responded accurately to the critical statement, suggesting that both groups had the linguistic knowledge necessary to the required inferences. Differences were found, however, in the groups' verification latencies. Poor, but not good, readers responded faster to explicit than to implicit verification statements for both because and although sentences. In Experiment 2, poor readers were induced to generate causal inferences for the because experimental sentences by including fillers that were apparently counterfactual unless a causal inference was made. In Experiment 3, poor readers were induced to generate contrastive inferences for the although sentences by including fillers that could only be resolved by making a contrastive inference. Verification latencies for the critical statements showed that poor readers made causal inferences in Experiment 2 and contrastive inferences in Experiment 3 doting comprehension. These results were discussed in terms of context effect: Specific encoding operations performed on anomaly backgrounded in another passage would form part of the context that guides the ongoing activity in processing potentially relevant subsequent text.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.329-336
• /
• 2006

The characteristics of mash qualities of takju prepared by addition of chestnut peel powder(5%, 10%, 20% and 30% per steamed rice) were investigated during fermentation. That is, in all fermentation periods, changes of pit total acid, organic acids, solids, amino nitrogen, total sugar and reducing sugar, microorganisms, alcohol and color were determined and analyzed. There was significant differences in characteristics of mash qualities by addition of chestnut peel powder. In general, contents of total acid, organic acids, amino nitrogen, total sugar, reducing sugar and ethanol of takju added with chestnut peel powder were lower than those of steamed rice only, whereas solid contents was higher. But ethanol content of takju added with 5% of chestnut peel powder after 8 days of fermentation was 9.6% which was similar to that of takju prepared by addition of steamed lice only. Also, microbial populations such as total viable cells, yeast and lactic acid bacteria of the treatments were increased to about $10^8CFU/mL$ after 2 days of fermentation and then decreased gradually. In the beginning stage of fermentation color differences value of the treatments were $1.99{\sim}10.27$, and the differentials reduced gradually during fermentation.