• The Journal of Engineering Geology
• /
• v.5 no.3
• /
• pp.289-300
• /
• 1995

At the initial stage of the underground reservoir design one should thoroughly consider surface and subsurface hydrology, hydrogeologic characteristics of aquifer system, and the function of cut - off wall because it is linked to the effective management. In this study, three dimensional finite difference model was applied to analyse the function of Ian underground reservoir at Kyungbuk Province. The steady and unsteady state conditions after construction of the underground dam were simulated through the model, and from these results the groundwater budget and the safe yield were determined. The model simulation indicates the infiltration of irrigation water to be one of the major factors of seasonal fluctuation of groundwater level. The recharge rates of irrigation water were estimated as 4.3mm/d during May and June, and 1.7mm/d during July and Agust. Groundwater recharge from the watershed area estimated to about $0.04m^3/s$, almost consistent through the year. In 1984, groundwater discharge through the transverse section of the dam was $0.002m^3/s$ and the optimum yield for two momths(July and Aguest)was $254000m^3$, however, the discharge became $0.013m^3/s$ in1993, implying the failure of cut -off function. without appropaiate of the cut - off wall, optiumum yield during the irrigaton period would be $93, 000m^3$.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.45-56
• /
• 2006

Recently, the more potential waste sites are being required as increasing the demand of better human life. But the construction of waste disposals has many restrictions because of lack of good quality clay and high cost of liners. So, in this study, we studied the liner materials to develop more cheaper soil liner that can be satisfied the environmental criterion for the coefficient of permeability and shear strength. A series of compaction test and triaxial (consolidation, permeability, and shear) tests were performed to obtain the optimized weight ratio of Bentonite-Soil mixture (B/S) including the least amount of bentonite. A series of soil tests were performed to acquire the appropriate weathered granite soil-bentonite mixture that is satisfied the environmental criterion of soil liner($k=1{\times}10^{-7}cm/sec$). At first, weathered granite soils were classified with four different particle-size soils, and B/S ratio was increased as 5% step for each particle-size. The test results showed that in case of weathered granite soil passing through No. 100 sieve, B/S=15% satisfied the soil liner criterion. The measured coefficient of permeability and the Chapuis's two equations were also compared. And a predicting equation for the coefficient of permeability was suggested, which is suitable for the mixture soil with the B/S ratio used in this study. The optimal weight ratio for the mixture soils used in this study was 15% in the both cases of permeability and shear strength.

• Korean Journal of Ecology and Environment
• /
• v.47 no.spc
• /
• pp.100-115
• /
• 2014

For this study, we collected fishes of seven times at the 51 sites by stream orders (2-6) from November 2007 to September 2010. In the results, 55 species belonging 12 families were collected. And there were one species (1.8%) of Natural monument, 6 species (10.9%) of endangered and 22 species (40.0%) of Korea endemic. Dominant species was Zacco koreanus and subdominant species was Zacco platypus in whole. Stream orders (2-6) increased with increasing species, diversity (H'), evenness (EI), richness (RI), tolerant (TS), omnivore (OS) and decreasing individual, dominance (DI), sensitive (SS) insectivore (IS), total IBI score. Principal component analysis results showed location of variable (species, individual, community index, relative abundance of tolerant, sensitive, omnivore, insectivore species) and each site changes in upstream and down-stream changes in their distribution. Correlation analysis showed significant differences between stream orders (2-6) and variable (species: Sp, diversity index: H', omnivore species: OS, stream depth: SD, stream width: SW and water temperature: WT).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.1014-1017
• /
• 2012

In this paper, we introduce a method which enhances the azimuth resolution to obtain the high-resolution SAR image. We used ${\omega}-k$ algorithm to obtain the SAR image and extrapolation using auto-regressive(AR) method to enhance the azimuth resolution in the 2-D frequency domain. The AR method is a linear prediction model-based extrapolation technique. In the result, we showed the performance comparison with respect to the target range and the prediction order of Burg algorithm which is one of AR method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1785-1796
• /
• 2015

In this paper, we investigate achieving the full diversity order and power gains in case of using OSTBCs and quasi-OSBCs in the x channel system with interference alignment with more than 2 antennas at each terminal. A slight degradation is remarked in the case of quasi-OSTBCs. In terms of receiver structure, we show that due to the favorable structure of the channel matrices, the simple zero-forcing receiver achieves the full diversity order, while the interference cancellation receiver leads to degradations in performance. As compared to the conventional scheme, simulation results demonstrate that our proposed schemes achieve 14dB and 16.5dB of gain at a target bit error rate (BER) of 10^-4 in the case of OSTBCs with 3 and 4 antennas at each terminal, respectively, while achieving the same spectral efficiency. Also, a gain of 10dB is achieved at the same target BER in the case of quasi-OSTBC with 4 antennas at each terminal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3468-3473
• /
• 2013

Conditions that overlay multicast tree must satisfy for the real-time application system of a video-conference, an internet broadcasting is two things. First, the degree of nodes in a tree must be proper value. Second, the diameter of the multicast tree, distance between longest two users should be short. If the path between two users in the tree is long, the delay time in data transmission between two users great. So, it is not suitable to the application system such as video-conferences. In this paper, the cost of the dijkstra algorithm calculate with proposed score-function through checking the extra bandwidth, the delay and the requested bandwidth. It is composed the tree through the dijkstra algorithm.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.321-325
• /
• 1996

Quantum chemical calculations are used to characterize the decomposition of nitrogenmonoxide over $Cu^{n+}$-Y zeolite. The method of theoretical calculations, such as CNDO/2, have been applied to cluster models representing cation sites in zeolite to obtain total energies, LUMO energies, and Wiberg bond orders. The calculated total energies and bond orders of cluster models showed the reaction mechanism of NO decomposition over $Cu^{n+}$ site in zeolite framework. The suggested cluster models of varying Si/Al ratios studied with exchange cations in the $Cu^+$ and in the $Cu^{2+}$ states. And the calculated LUMO energies can predict L acidifies of cluster models. The results from these experiments showed the possibility of the mechanism of NO decomposition, progressing adsorption of NO, conversion to $N_2$ and $O_2$, desorption of $N_2$ and $O_2$ in sequence. The L acidity of $Cu^{2+}$ ion in cation site is more strong than $Cu^+$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1992

A method analizing contact pressure between plate and elastic half space is presented by using F.E.M. With the method, the pressure intensities at surface nodes of half space cae be directly calculated by using flexibility matrix of half space. The method is originally presented by Y.K. Cheung et al.(3) Insted of Y.K. Cheung's method, which use a conception of equi-contact pressure area around each surface nodes of half space in the noded rectanqular element area. We use the equi-contact pressure area around the Gaussian integration points of half space surface in the noded isoparametric element area. Numarical examples are presented and compared with other's studies.

• The Journal of Engineering Geology
• /
• v.20 no.4
• /
• pp.415-424
• /
• 2010

A prototype of a Concrete-Faced Rock-fill Dam (CFRD) was constructed to evaluate the behavior of the materials in each zone within the dam. The tested materials, selected based on their grain size distribution, were used in constructing the prototype dam with layers of variable thickness, settlement ratio, and water content. We investigated the suitability of various values of hydraulic conductivity, water content, dry unit weight, and settlement ratio for zones within the dam. The test results revealed the relationships between the number of passes and the dry unit weight, between the dry unit weight and the settlement ratio, and between the settlement ratio and the number of passes. This paper focuses on the relationship between hydraulic conductivity and the number of passes. The results of the present analysis could be used to establish reasonable compaction standards for materials used in dam construction.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.35-42
• /
• 2005

This paper proposes a new reseeding methodology using a variable-rank multiple-polynomial linear feedback shift register (MP-LFSR). In the proposed reseeding scheme, a test cube with large number of specified bits is encoded with a high-rank polynomial, while a test cube with a small number of specified bits is encoded with a low-rank polynomial. Therefore, according to the number of specified bits in each test cube, the size of the encoded data can be optimally reduced. A variable-rank MP-LFSR can be implemented with a slight modification of a conventional MP-LFSR and Multiple Polynomial can be represented by adding just 1 bit to encoding data. The experimental results on the largest ISCAS'89 benchmark circuits show that the proposed methodology can provide much better encoding efficiency than the previous methods with adequate hardware overhead.