• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.89-95
• /
• 1996

If the transmission line voltage is greater than 500kV, audible noise (AN) and hum noise (HN) due to corona discharges on the conductor would be an important design factor for the conductor selection of transmission line. Also there is an aeolian noise: wind noise(WN) from the tower and the conductor due to wind. This paper presents the results of a statistical analysis of audible noise, hum noise, aeolian noise of 6-480mm$^{2}$ conductor bundle in KEPRI 765kV Test Transmission Line which was constructed to develop 765kV double circuit AC transmission line for the first time in the world. The result of the analysis shows that 6-480mm$^{2}$ conductor bundle and tower satisfy configuration the audible noise design criterion of 50dB(A).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.262-271
• /
• 2002

In PWM inverters used in traction motor drive systems, the switching frequency is restricted by their large power capacity and thus the electromagnetic acoustic noise is generated. To reduce such an audible noise, the new MRSF-PWM(Modified Random Switching Frequency PWM) method is proposed. In the Proposed MRSF-PWM method, both triangular wave and sawtooth wave are used together as carrier waves for harmonic diffusion and reference wave is generated by injecting 3rd harmonic into the stone wave to expand the linear control region of output voltages. To verify the validity of the proposed MRSF-PWM method, computer simulations are carried out. And the results show that the MRSF-PWM method is more excellent than other RPWM methods in the aspects of both linearity and harmonic diffusion md more effective than SPWM(Sinusoidal PWM) method for the reduction of an audible noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.616-620
• /
• 2002

가청범위의 주파수보다 낮은 소리, 즉 초저주파음과, 가청음 중 주파수가 낮은 음을 합하여 저주파음으로 분류하기도 하는데, 대략 100Hz 이하의 주파수를 갖는 음을 가리킨다. 인간이 느끼는 저주파음에 대한 영향은 여러 범위로 조사되고 있으며 주로 청력손실과 불쾌함에 미치는 영향에 초점을 맞추고 있다.(중략)

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.35-40
• /
• 1997

The hysteresis control method has been frequently used for current control of power conversion equipments or motor drive systems. This method makes the measured signal follow the reference signal by changing the control signal whenever the error signal exceeds the preset band width. In this paper, hysteresis control method with fast response characteristics is applied for active noise control to suppress acoustic noise. Both Pentium processor and sound blaster 16 are used for experimental implementation, which executes A/D, D/A conversion and also is used as operating source of loudspeaker for audible noise cancellation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.287-297
• /
• 1998

RPWM(Random Pulse Width Modulation) is a switching technique to spread the voltage and current harmonics on wide frequency area. Using randomly changed switching frequency of the inverter, the power spectrum of the electromagnetic acoustic noise can be spread into the wide-band area. And the wide-band noise is much more comfortable and less annoying than the narrow-band one. So RPWM have been attracting an interest as an excellent reduction method of acoustic noise on the inverter drive system. In this paper a new RPPWM(Random Position PWM) is proposed and implemented. Each of three pulses is located randomly in each switching intervals. Along with the randomization of PWM pulses, the space vector modulation is processed on the C167 microcontroller also. The experimental results show that the voltage and current harmonics were spread into wide band area and that the audible switching noise was reduced by proposed RPPWM method.

• 전기의세계
• /
• v.35 no.12
• /
• pp.768-775
• /
• 1986

최근 송전전압의 초고압화에 따른 도체의 코로나에 의한 가청소음 및 라디오, TV장해와선로부근의 전자계 영향, 경관영향등에 대하여 세심한 배려가 요구되고 있다. 본고에서는 송전선의 코로나 및 전자계 영향, 경관영향, 경과지선정에 관하여 각국의 연구실태 및 그 대책에 관하여 서술하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.796-801
• /
• 2007

This research presents a laboratory study about a comparison between two methods that measure a hearing threshold of the Subjects who participated in an experiment of the Jury test. The Subjects heard a signal by a headphone. The Subjects of total 63 persons (man=42, woman=21 persons) participated in an experiment. A test of hearing was divided into two (Top-Down, Bottom-Up) methods. Total time of hearing test was about 80 minute(40min/day). As a results of the hearing test, a hearing threshold of the Subjects who used to wear a headphone was higher than that of the Subjects who not used to wear a headphone. A hearing threshold of a man was higher than that of a woman. The result of hearing test was showed that ISO's hearing threshold(MAF) was lower than a result that get from an experiment.

• Journal of the Ergonomics Society of Korea
• /
• v.1 no.2
• /
• pp.33-37
• /
• 1982

인간의 가청 영역은 어린이의 경우에 20 Hz-20KHz로 알려져 있다. 그러나, 20Hz 이하의 초저주파 영역에서도 그 음압 레벨이 높은 경우에는 인간이 감지할 수 있다는 사실이 알려졌는데, 그것은 듣느다기 보다는 느낀다는 것으로 표현되고 있다. 초저주파 음이 인간에게 미친다고 생각되는 좋지않은 영향 때문에, 60년대말 이후에 새로운 종류의 연구 과제로서, 음향학자, 심리학자, 의학자 등에 의해 활발히 연구되고 있다. 게다가 경제의 고도성장 및 환경 개선의 노력에 따라, 대기 오염, 가청 소음, 진동 등의 전형적인 환경 공해 외의 초저주파음 공해에 대한 사람들의 인식과 불평이 문제시 되고 있다. 즉, 고주파수의 음이 잘 소음된 곳에서, 소리가 잘 들리지는 않으나 항상 사람들을 불안하게 하는 그 무엇이 있다는 것이다. 이에따라 지난 몇 년간 인간의 산업 활동과 관계 있는 높은 레벨의 초조주파 소음의 발생원이 확인되었고, 그에 따른 대책 및 설계 단계에서의 고려가 요구되고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.20-25
• /
• 2005

The thickness, loading, and broadband noise generated from the trailing edge of the UH-1H main rotor are numerically compared each other. The Kocureck and Tangler's prescribed wake model is adopted to represent the wake geometry during the hovering motion. Three tip Mach numbers of $M_{T}$ = 0.2, 0.4, and 0.8, are selected to analyze the effects of different tip Mach numbers. At $M_{T}$ = 0.8, in considering the A-weighting and audible frequency band, the random noise is smaller than the tonal noises such as the thickness and the loading noise which have the low frequency characteristics. Especially most of the random noise frequency spread on the ultrasound region. On the other hand, below $M_{T}$ = 0.4, the band of random noise moves to the audible frequency region, and the random noise becomes larger than the tonal noise. It turns out that the random noise analysis of the rotor should be necessary at low speed operating condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.280-281
• /
• 2009