• Title/Summary/Keyword: 가스테이블

Search Result 11, Processing Time 0.027 seconds

A Study on the Mechanical Ventilation Design that Consider Supply and Exhaust Efficiency of the Apartment House Kitchen (공동주택 주방의 급ㆍ배기효율을 고려한 기계환기 설계에 관한 연구)

  • 함진식
    • Journal of the Korean housing association
    • /
    • v.15 no.3
    • /
    • pp.101-108
    • /
    • 2004
  • To find more efficient exhaust effect, air curtain of upward or downward trend in gas table and left or right side of range hood were made. As result that film vapor from range hood lower part by digital camera, the air current change by moving existence and nonexistence of exhaust fan and direction of air curtain were known. Under all experiment condition, upward air curtain superior exhaust performance.

Induction of the High Order Calibration Equation of Metal Oxide Semiconductor Gas Sensors (산화물 반도체식 가스센서의 입출력 고차 캘리브레이션 방정식 도출)

  • Park, Gyoutae;Kim, Kangmin;Lee, Hyeonggi;Yoon, Myeongsub
    • Journal of the Korean Institute of Gas
    • /
    • v.24 no.2
    • /
    • pp.44-49
    • /
    • 2020
  • In this paper, a measuring circuit is designed through analyzing manufacture specification of the sensor based on MOS. And the best input-output polynomial are induced that really gas sensors are used in gas safety management industrial fields. Response characteristics of a MOS gas sensor is analysed by through sensor's output voltages are measured after standard gases with six kinds of concentrations are manufactured and are injected to the sensor. A lookup table is created by relations of sensor's output voltages by injecting gases with other concentrations. Because data of the formed lookup table are equal interval, a polynomial can be induced of method of approximation function. So the 5th polynomial of input-output for a sensor is defined, coefficients are calculated by using least squares method, and the 5th polynomial is completed for representing characteristics of the sensor. If the proposed polynomial is applied to gas leak detectors, an inverse transformation of polynomial and programing of array codes are recreated. In this research, polynomial is implemented with array types that intervals of values of a lookup table are one-fifth sampled and interpolated. The performance of proposed 5th calibration equation is verified that errors are reduced than a linear expression when tests are performed by measurement of concentrations against injection of standard gases.

Matching-Table-Construction of Hazardous Meterial and Coding Development (위험물 매칭테이블 구축 및 코드화 방안)

  • An, Chan-Gi;Jeong, Seong-Bong;Park, Jong-Seo;Jang, Seong-Yong
    • Proceedings of the Safety Management and Science Conference
    • /
    • 2012.04a
    • /
    • pp.435-446
    • /
    • 2012
  • 생활을 향상시키고 개선하기 위해 화학물질은 전 세계적으로 널리 이용 되고 있고, 또한 국내에는 38,000여종의 화학물질이 유통되고 있다. 그러나 화학물질은 그 이점에도 불구하고 사람이나 환경에 유해 영향을 가져올 가능성이 있어 위험물안전관리법에서는 3,000여종을 위험물로 분류하여 규제하고 있다. 위험물에 관련하여 유해화학물질관리법, 위험물안전관리법, 고압가스안전관리법, 총포 도검 화약류단속법, 원자력 진흥법, 농약관리법 등에서 개별적으로 규정하고 분류하고 있어 위험물질에 대한 표지사항이 해당 부처에 따라 상이하여 혼란을 야기하고 있고, 위험물에 대한 품목 및 품명의 고정으로 인하여 새롭게 생성된 위험물질에 대해 적용하는 데 문제점이 있다. 이에 의해 위험물질을 개별법에 따라 관리함으로써 중복된 위험물질 분류 및 관리의 문제가 있으며, 위험물질 분류에 있어서 위험물질에 따라 수송수단이 상이함에도 불구하고 수송수단별(도로, 철도, 해운, 항공) 위험물질에 대한 세분화된 자료가 부족하다. 따라서 수송관점에서 표준화된 위험물 물질정보의 분류와 코드화 방안개발이 필요하다. 본 연구는 국내 외 문헌 검토 및 위험물에 관련된 법제도 비교를 통하여 위험물 수송관리체계 정비방안과 위험물 수송사고의 문제점을 도출하고 기존의 위험물 분류체계에서 운송관점에서의 위험물 매칭테이블을 구축하고 신속한 사고대응을 위한 위험물질별 코드화 방안을 제안하도록 하겠다.

  • PDF

The Parallel Recovery Method for High Availability in Shared-Nothing Spatial Database Cluster (비공유 공간 데이터베이스 클러스터에서 고가용성을 위한 병렬 회복 기법)

  • You, Byeong-Seob;Jang, Yong-Il;Lee, Sun-Jo;Bae, Hae-Young
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2003.11c
    • /
    • pp.1529-1532
    • /
    • 2003
  • 최근 인터넷과 모바일 시스템이 급속히 발달함에 따라 이를 통하여 지리정보와 같은 공간데이터를 제공하는 서비스가 증가하였다. 이는 대용량 데이터에 대한 관리 및 빠른 처리와 급증하는 사용자에 대한 높은 동시처리량 및 높은 안정성을 요구하였고, 이를 해결하기 위하여 비공유 공간 데이터베이스 클러스터가 개발되었다. 비공유 공간 데이터베이스 클러스터는 고가용성을 위한 구조로서 문제가 발생할 경우 다른 백업노드가 대신하여 서비스를 지속시킨다. 그러나 기존의 비공유 공간 데이터베이스 클러스터는 클러스터 구성에 대한 회복을 위하여 로그를 계속 유지하므로 로그를 남기기 위해 보통의 질의처리 성능이 저하되었으며 로그 유지를 위한 비용이 증가하였다. 또한 노드단위의 로그를 갖기 때문에 클러스터 구성에 대한 회복이 직렬적으로 이루어져 고가용성을 위한 빠른 회복이 불가능 하였다. 따라서 본 논문에서는 비공유 공간 데이터베이스 클러스터에서 고가용성을 위한 병렬 회복 기법을 제안한다. 이를 위해 클러스터 구성에 대한 회복을 위한 클러스터 로그를 정의한다. 정의된 클러스터 로그는 마스터 테이블이 존재하는 노드에서 그룹내 다른 노드가 정지된 것을 감지할 때 남기기 시작한다. 정지된 노드는 자체회복을 마친 후 클러스터 구성에 대한 회복을 하는 단계에서 존재하는 복제본 테이블 각각에 대한 클러스터 로그를 병렬적으로 받아 회복을 한다. 따라서 정지된 노드가 발생할 경우에만 클러스터 로그를 남기므로 보통의 질의처리의 성능 저하가 없고 클러스터 로그 유지 비용이 적으며, 클러스터 구성에 대한 회복시 테이블단위의 병렬적인 회복으로 대용량 데이터인 공간데이터에 대해 빠르게 회복할 수 있어 가용성을 향상시킨다.들을 문법으로 작성하였으며, PGS를 통해 생성된 어휘 정보를 가지고 스캐너를 구성하였으며, 파싱테이블을 가지고 파서를 설계하였다. 파서의 출력으로 AST가 생성되면 번역기는 AST를 탐색하면서 의미적으로 동등한 MSIL 코드를 생성하도록 시스템을 컴파일러 기법을 이용하여 모듈별로 구성하였다.적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는

  • PDF

A Preliminary Study on Tantalum Recycling from Obsolete Condenser by Multidisciplinary Process (융복합기술(融複合技術)에 의한 폐(廢)콘덴서로부터 탄탈륨 재활용(再活用) 기초연구(基礎硏究))

  • Lee, Hoo-In;Kim, Sang-Bae;Kim, Byong-Gon;Choi, Young-Yoon
    • Resources Recycling
    • /
    • v.16 no.6
    • /
    • pp.34-38
    • /
    • 2007
  • For recycling of tantalum from obsolete condenser, physical separations and chlorination of tantalum scraps with $Cl_2$ and $CCl_4$ were investigated. The recovery ratio of tantalum from obsolete condenser was 98% by using a multidisciplinary process of crushing by stamp mill, wet gravity separation by the shaking table, and air classification. In the chlorination reaction of non-oxidized Ta anode with $Cl_2$, the highest weight loss ratio is at least 60%, while in the chlorination reaction of Ta anode with $CCl_4$, the reaction rate for the oxidized Ta anode is faster than that of the non-oxidized Ta anode.

Study of Road Load of Electric Two-Wheeled Vehicle (전기이륜차의 도로부하 설정에 관한 연구)

  • Kil, Bum-Soo;Kim, Gang-Chul
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.35 no.5
    • /
    • pp.525-531
    • /
    • 2011
  • Recently, the demand of environmentally friendly transportation has increased due to the environmental issues. Electric two-wheeled vehicles do not have the noise pollution nor exhaust gases of vehicles with internal combustion engines. Performance evaluation of an electric two-wheeled vehicle was carried out. A driving test on outdoor roads was performed and a chassis dynamometer was used. The chassis dynamometer simulates the road load of the vehicle. The road load influences the tests using the chassis dynamometer. The differences between the table method and the coasting test for setting the road load was compared and analyzed.

Development Trend of Damping Mg Alloys (진동 감쇠능 마그네슘 합금의 개발 동향)

  • Jang, Dong-In;Kim, Shae-K.
    • Journal of Korea Foundry Society
    • /
    • v.28 no.5
    • /
    • pp.199-203
    • /
    • 2008
  • 현재 사용되고 있는 진동감쇠능 Mg-Zr 합금인 K1A는 우수한 진동감쇠능을 갖으나 열악한 기계적 특성과 Zr이 고가이면서 고융점 원소로 합금화가 어렵다는 문제점 때문에 진동테이블, 미사일 유도시스템 및 레코딩 장비 등에 소량만 적용되고 있다. Mg-Ni 합금의 경우Ni가 Mg 용탕 내에 고용되지 않아 우수한 진동감쇠능을 갖으나 Fe, Cu등과 함께 Mg의 부식을 가속시키는 원소로 사용이 제한적일 뿐 아니라 Zr과 마찬가지로 Ni도 고융점 원소로 합금화가 어렵다는 것도 문제점으로 작용하고 있다. Mg-Si 합금의 경우 Si이 극소량만 고용되어 우수한 진동감쇠능을 보이며 Ni과 달리 부식에 영향을 받지 않는 원소이지만 Zr, Ni와 마찬가지로 고가이면서 고융점 원소로 합금화가 어렵다는 문제점이 있다. Mg 용탕에 첨가하게 되면 용탕의 표면에 MgO, CaO 피막을 형성하여 발화현상을 억제할 뿐 아리라 첨가량의 증가에 따라 발화온도를 상승시키는 Ca의 경우 Mg 내에 고용되어 진동감쇠능을 감소시킬 뿐 아니라 유동성 저하 및 열간균열을 야기하는 것으로 나타났다. 그러나 CaO의 경우 Mg내에 고용되지 않고, 가격이 저렴하며 Mg 고유 특성의 변화가 적다. 또한 Ca와 같이 Mg 용탕의 발화를 억제하여 보호가스인 $SF_6$를 사용하지 않아도 된다. 이런 다양한 장점을 갖는 CaO를 첨가한 Mg합금이 진동감쇠능을 유지하면서 기계적 특성이 향상된다면 주행 시 안전성 및 정음성이 요구되는 수송기기 분야와 외부충격으로부터 데이터 보호가 필수적인 휴대용 전자정보통신기기 분야에서 적용이 증가할 전망이며 이에 따라 이 분야에 대한 지속적인 연구와 투자가 이루어져야 할 것이다.

Performance Analysis of Matching Layer for Level Measurement in CNG (CNG 레벨계측을 위한 Matching layer의 성능분석)

  • Lee, Hongyoon;Kim, Kwonse;Choi, Dooseuk
    • Journal of the Korea Convergence Society
    • /
    • v.9 no.4
    • /
    • pp.143-150
    • /
    • 2018
  • This work conducted the experimental analysis on ultrasonic acoustic matching in order to measure the accuracy of gaseous fuel level values. The experimental devices were used as 12V-DC supply, control T1 board, oscilloscope (DS01072B), ultrasonic probe and pattern table. The research models were designed by ceramic assay which can determine the transmitting and receiving energies. The result of the ringing area could verify the increased characteristics in the order of D (0.180m) < E (0.184m) < B (0.204m) < A (0.234m) < F (0.244m) < C (0.247m) models based on initial 2.9V of the maximum peak voltage. From the experimental results, the model designed by Ø21*3+2t of the matching layer was notable in that the most outstanding directivity energy could be created.

A Study on Non-Fungible Token Platform for Usability and Privacy Improvement (사용성 및 프라이버시 개선을 위한 NFT 플랫폼 연구)

  • Kang, Myung Joe;Kim, Mi Hui
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.11 no.11
    • /
    • pp.403-410
    • /
    • 2022
  • Non-Fungible Tokens (NFTs) created on the basis of blockchain have their own unique value, so they cannot be forged or exchanged with other tokens or coins. Using these characteristics, NFTs can be issued to digital assets such as images, videos, artworks, game characters, and items to claim ownership of digital assets among many users and objects in cyberspace, as well as proving the original. However, interest in NFTs exploded from the beginning of 2020, causing a lot of load on the blockchain network, and as a result, users are experiencing problems such as delays in computational processing or very large fees in the mining process. Additionally, all actions of users are stored in the blockchain, and digital assets are stored in a blockchain-based distributed file storage system, which may unnecessarily expose the personal information of users who do not want to identify themselves on the Internet. In this paper, we propose an NFT platform using cloud computing, access gate, conversion table, and cloud ID to improve usability and privacy problems that occur in existing system. For performance comparison between local and cloud systems, we measured the gas used for smart contract deployment and NFT-issued transaction. As a result, even though the cloud system used the same experimental environment and parameters, it saved about 3.75% of gas for smart contract deployment and about 4.6% for NFT-generated transaction, confirming that the cloud system can handle computations more efficiently than the local system.

Design and Implementation of a Translator for Translating Java Bytecode into MSIL (자바 Bytecode 에서 MSIL 로의 변환을 위한 번역기의 설계 및 구현)

  • Min, Jung-Hyun;Oh, Se-Man
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2001.04b
    • /
    • pp.743-746
    • /
    • 2001
  • 자바는 객체지향 언어이고, 한번 작성된 프로그램은 자바 가상 기계가 있는 모든 곳에서 수정없이 실행될 수 있기 때문에 소프트웨어의 개발과 유지 보수에 많은 장점을 가진 언어이다. 이러한 특징으로 인하여 개발되는 제품들이 자바로 구현되는 경우가 많다. 그러나 아직 대다수 소프트웨어 개발자들은 주로 C 언어나 C++ 언어를 사용하고 있으며, 최근에는 C#이라는 언어를 사용하고 있다. 자바가 플랫폼에 독립적인 장점은 가지고 있지만, 다수의 개발자 및 사용자가 마이크로소프트 윈도우 운영체제를 사용하고 있다는 것을 감안한다면 그리 탁월한 장점만은 될 수 없다. 또한, 최근의 개발동향이 COM(Component Object Model)을 지향하고 있고, 이는 더 이상 개발자들에게 프로그래밍 언어에 구애를 받지 않고 오직 개발 제품에 대한 집중력을 가질 수 있는 환경을 제공할 수 있다면, 그 개발 효율에 있어서 상당한 이점을 가질 수 있다는 의미이다. 따라서, COL(Component Object Language)을 기반으로 하고 있는 C# (C sharp)언어를 사용하여 개발을 함에 있어서 자바의 언어를 C# 언어로 변환할 수 있다면, 신생 언어인 C#에 있어서 기존 자바로 되어 있는 유용한 개발 제품들을 보다 효율적으로 이용할 수 있을 것이다. 본 논문에서는 두 언어(자바, C#)를 하나로 잇는 교량(bridge)역할을 할 수 있도록 자바의 중간 언어인 Bytecode를 C#의 중간 언어인 MSIL(Microsoft Intermediate Language)로 바꿀 수 있는 중간 언어 번역기를 설계하고 구현하였다. 이를 위한 방법으로는 먼저, 자바 Bytecode 와 MSIL 의 어셈블리 형태에서의 명령어 매칭과정을 매핑 테이블을 이용하여 처리하였고, MSIL 에서 자바 Bytecode 의 함수와 같은 기능을 하는 메소드의 변환을 위하여 마크로 변환기법을 이용하여 해결하였다.I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를

  • PDF