• Proceedings of the Korean Reliability Society Conference
• /
• 2000.11a
• /
• pp.229-233
• /
• 2000

본 Study는 휴대용 CST Deck부의 신뢰성 개선/보증활동 중에서 출하수명 보증을 위해 개발한 가속시험에 관한 것이다. 휴대용 CST의 사용 환경과 Deck부의 고장 특성을 고려하여 진동 Stress를 가속 인자로 검토하였고, 예비 시험을 통해 타당성을 확인하였다. 3 수준에서 실시한 수명 Data를 역거듭 제곱 모형을 적용하여 사용자 수준에서의 신뢰성 정보를 추정하였고, 이를 시장 Data와 비교하여 모형의 타당성을 검토하였다. 3 수준 중에서 가장 Stress가 높은 수준에서의 시험을 출하 수명 보증 시험으로 선정하였고, 이 때 가속 효과는 약 55배인 것으로 추정된다.

• Electronics and Telecommunications Trends
• /
• v.7 no.3
• /
• pp.145-153
• /
• 1992

통신시스팀을 구성하는 PBA수준에 대해 운용중의 고장률 추정 및 고장형태 파악을 목적으로 실시하는 가속수명시험에 대해 서술하였다. 이를 위해 통신 시스팀에서 나타나는 고장 유형 및 각 기간에서의 고장률데이터 확보방법, 가속수명시험의 종류 및 원리, 시스팀을 구성하는 PBA 수준에 대한 가속수명시험조건에 대해 서술하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1221-1229
• /
• 2014

This paper proposes an approach for predicting the fatigue life of a propeller shaft of a forklift truck by an accelerated life test method. The accelerated life test method adopted in this study is the calibrated accelerated life test, which is highly effective in the prediction of the lifetime and enables significant reduction of the test time as well as a quantification of reliability in the case of small sample sizes. First, the fatigue test was performed under two high stress levels, and then, it was performed by setting low stress levels in consideration of the available test time and extrapolation. Major reliability parameters such as the lifetime, accelerated power index, and shape parameter were obtained experimentally, and the experimentally predicted lifetime of the propeller shaft was verified through comparison with results of an analysis of load spectrum data under actual operating conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.273-281
• /
• 2010

In this paper, a method to predict the fatigue life of an axle drive shaft by the calibrated accelerated life test (CALT) method is proposed. The CALT method is very effective for predicting lifetimes, significantly reducing test time, and quantifying reliability. The fatigue test is performed by considering two high stress and one low stress levels, and the lifetime at the normal stress level is predicted by extrapolation. In addition, in this study, the major reliability parameters such as the lifetime, accelerated power index, shape parameter, and scale parameter are determined by conducting various experiments. The lifetime prediction of the axle drive shaft is verified by comparing the experimental results with load spectrum data. The results confirm that the CALT method is effective for lifetime prediction and requires a short test time.

• Journal of Korean Society of Transportation
• /
• v.13 no.3
• /
• pp.99-120
• /
• 1995

가속차선이 교통류의 운영상태와 안전에 기여하는 바는 벌써부터 인식되어 왔으나 이 변속차선이 유입형 연결로 접속부 전체의 운영에 미치는 영향을 수치화하거나 체계적으로 평가하기 위해 현장 자료를 바탕으로 한 실험적 연구는 진행되어 오지 못하엿다. 현재 널리 참고되고 있는 1985년 USHCM의 접속부 운영상태 분석 방법론은 단지 차선 1의 교통량을 예측하는 데 주안점을 두고 있는데 가속 차선의 길고 짧음에 따라 접속부 바로 전 차선 1의 교통량 분포가 크게 변화한다는 사실(많은 현장 관측을 통해 확인)은 고려하지 못하고 있다. 이는 접속부 운영 상태가 같은 교통량 조건하에서도 크게 차이가 나나다는 것을 뜻하며 가속차선의 존재를 무시한채 운영과 관련한 MOE를 도출하는 것이 서비스수준 산정 방법으로 충분한 것인가 하는 의문을 자연히 낳게 한다. 본 논문은 가속차선이 고속도로 연결로 접속부의 운영에 미치는 영향을 주로 다루고 있다. 가속차선의 독립적인 역할과 영향을 체계적으로 관찰하기 위해 미국내 여러 지역에서 8개의 고속도로 연결로접속부를 선택하고 각 지점에 접속부의 상하류 지역을 포함하는 2,000ft 구간내에 다섯대의 카메라를 설치, 지점별로 약 3시간 동안 자료를 수집하였다. 총 193개 자료수의 분석을 통해서 다중 회귀 모형을 구성하는 독립변수로 가속차선의 길이를 사용하는 것이 타당하다고 결론지었으며, 접속부 운영의 질, 특히 속도를 추정하기 위한 모형을 수립하였다. 본 연구를 통해 얻어진 관점과 방법론은 1994USHCM 고속도로 연결로 분석 방법론 설정에 일부분 반영되고 잇으며 특히 교통운영과 흐름의 방식에서 유사한 엇갈림 구간의 분석 방법과 일관성 있는 분석 체계 마련을 위해서 서비스수준 산정 절차 정립에 엇갈림 알고리즘을 활용하는 방안을 제시하였다.

• Journal of Korean Elementary Science Education
• /
• v.22 no.1
• /
• pp.1-14
• /
• 2003

This study investigated the effects of the cognitive acceleration program devised for accelerating the development of formal reasoning ability of students. ‘Thinking Science’ activities developed by the Cognitive Acceleration through Science Education(CASE) project were implemented to 420 students in 5th grade aged 10+ in four elementary schools over a period of two yea. Homogeneity between the experimental group and control group was tested with SRT II, and the improvement of formal reasoning ability of the students was tested with SRT III. The results were analyzed by treatment, gender, and cognitive levels of the students. Statistically significant gains were shown in the CASE group compared with those in the control group. Cognitive level of girls in the CASE group increased as compared with the control group, while there was moderate effect in boys for the primary school. These results implied that the thinking science activities were effective in cognitive acceleration of girls aged 10+. It was shown that much more CASE students in concrete operational level shifted to formal operational level as compared with the control group while there were no significant effects in the other levels for primary school.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.284-298
• /
• 2023

With the rapid advances in automated driving technology, opportunities to experience automated driving directly or indirectly are being provided to the public. On the other hand, research on the preferred automated driving patterns from the user's perspective has not been conducted in Korea. This study used a driving simulator and an experimental vehicle capable of automated driving to evaluate the user satisfaction regarding longitudinal and lateral accelerations. Automated driving patterns were implemented in a virtual environment simulation using five values of longitudinal and lateral accelerations derived from driving experiments. Among these values, three were implemented through experimental vehicle-based automated driving to evaluate satisfaction and anxiety. The participants evaluated lateral acceleration more sensitively than longitudinal acceleration and showed higher levels of anxiety. Based on these results, the necessity of user-oriented evaluation research for automated driving patterns and the suitability of simulator-based evaluation methods were presented.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.73-79
• /
• 2020

As the number of earthquakes gradually increases on the Korean Peninsula, much research has been actively conducted to detect earthquakes quickly and accurately. Because traditional seismic stations are expensive to install and operate, recent research is currently being conducted to detect earthquakes using low-cost MEMS sensors. In this article, we evaluate how a low-cost MEMS acceleration sensor installed in a smartphone can be used to detect earthquakes. To this end, we installed about 280 smartphones at various locations in Korea to collect acceleration data and then assessed the installed sensors' noise floor through PSD calculation. The noise floor computed from PSD determines the magnitude of the earthquake that the installed MEMS acceleration sensors can detect. For the last few months of real operation, we collected acceleration data from 200 smartphones among 280 installed smartphones and then computed their PSDs. Based on our experiments, the MEMS acceleration sensor installed in the smartphone is capable of observing and detecting earthquakes with a magnitude 3.5 or more occurring within 10km from an epic center. During the last several months of operation, the smartphone acceleration sensor recorded an earthquake of magnitude 3.5 in Miryang on December 30, 2019, and it was confirmed as an earthquake using STA/LTA which is a simple earthquake detection algorithm. The earthquake detection system using MEMS acceleration sensors is expected to be able to detect increasing earthquakes more quickly and accurately.

• Journal of the Korean Data and Information Science Society
• /
• v.8 no.1
• /
• pp.21-30
• /
• 1997

In accelerated life tests, the failure time of an item is observed under a high stress level, and based on the time the performances of items are investigated at the normal stress level. In this paper, when the mean of the prior of a failure rate is known in the exponential lifetime distribution with censored accelerated failure time data, we utilize the empirical Bayesian method by using the moment estimators in order to estimate the parameters of the prior distribution and obtain the empirical Bayesian predictive density and predictive intervals for a future observation under the normal stress level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7934-7940
• /
• 2015

The raise of the acceleration can be one of possible methods to increase the scheduled speed of the metropolitan railway system. It is possible to raise the acceleration to the some point by increasing the traction power of the motor. However, there is a limit of the acceleration because the traction power over some level related to the adhesion causes a slip, which prevents from accomplishing the target acceleration. The running resistance is also an important factor to consider. Both the adhesion and the running resistance as well as the traction power vary according to the velocity. Therefore, the standardization of the acceleration needs the analysis of these factors as a function of velocity. In this study, we focus on the advanced urban transit unit(AUTS) for the standardization. We derive a novel equation of the adhesion suitable for the AUTS by investigation of the traction and adhesion equation as well as the experiment data. And finally we propose the standard of the acceleration based on this analysis.