• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.62-72
• /
• 2007

Mobile Virtual Private Network (MVPN) provides VPN services without geographical restriction to mobile workers using mobile devices. Coexistence of Mobile IP (MIP) protocol for mobility and IPsec-based VPN technology are necessary in order to provide continuous VPN service to mobile users. However, Problems like registration failure or frequent IPsec tunnel re-negotiation occur when IPsec-based VPN Gateway (GW) and MIP are used together. In order to solve these problems, IETF proposes a mechanism which uses external home agent (x-HA) located external to the corporate VPN GW. In addition, based on the IETF proposal, a mechanism that assigns x-HA dynamically in the networks where MN is currently located was also proposed with the purpose to reduce handover latency as well as end-to-end delay. However, this mechanism has problems such as exposure of a session key for dynamic Mobility Security Association (MSA) or a long latency in case of the handover between different networks. In this paper, we propose a new MVPN protocol in order to minimize handover latency, enhance the security in key exchange, and to reduce data losses cause by handover. Through a course of simulation, the performance of proposed protocol is compared with the existing mechanism.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2007

Increase in the wireless mobile network users brings the issue of mobility management into the Virtual Private Network (VPN) services. We propose a provider edge (PE)-based provider provisioned mobile VPN mechanism, which enables efficient communication between a mobile VPN user and one or more correspondents located in different VPN sites. The proposed mechanism not only reduces the IPSec tunnel overhead at the mobile user node to the minimum, but also enables the traffic to be delivered through optimized paths among the (mobile) VPN users without incurring significant extra IPSec tunnel overhead regardless of the user's locations. The proposed architecture and protocols are based on the BGP/MPLS VPN technology that is defined in RFC24547. A service provider platform entity named PPVPN Network Server (PNS) is defined in order to extend the BGP/MPLS VPN service to the mobile users. Compared to the user- and CE-based mobile VPN mechanisms, the proposed mechanism requires less overhead with respect to the IPSec tunnel management. The simulation results also show that it outperforms the existing mobile VPN mechanisms with respect to the handoff latency and/or the end-to-end packet delay.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.289-297
• /
• 2014

The purpose of this study was to investigate the relation between smartphone addiction and interpersonal competence of college students using social network service(SNS) through smartphones. This study used a descriptive study design. The convenience sample consisted of 502 college students in six cities. The data were collected from May to June in 2012 using Korean Smartphone Addiction Proneness Scale and Interpersonal Competence Questionnaire. Descriptive statistics, ${\chi}^2$-test, t-test, analysis of variance, and Pearson correlation coefficient were used to analyze the data. The results showed that 24.8% of SNS users were considered as a risk group, while 75.2% were normal user group. There were no significant differences of interpersonal competence between risk group and normal user group in the SNS users. However, risk group had higher self-disclosure scores than normal user group. The subjects who had higher scores for virtual life, one of smartphone addiction subdomains, had lower interpersonal competence and those with higher smartphone addiction scores showed lower score of managing interpersonal conflict in subdomains of interpersonal competence. These findings would contribute in development of preventive interventions for smartphone addiction and improvement program for interpersonal competence in college students.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.137-147
• /
• 2007

Projection-based augmented reality (AR) system refers to the system that accurately project high quality virtual information at the user-specified area by using the projector. Most of projection-based AR systems use the display device to support high quality and wide screen for increasing the user-immersion. Furthermore, they are implemented on the desktop environment due to the computational complexity. However, these projection-based AR systems are not suited as a mobile system and thus it may be inconvenient in the user point of view. Fortunately, Miniaturization of projectors and improved capacity of the mobile processor allowed the mobile AR system to be convenient. The limitation of established mobile AR system is that it uses small display screen which does not support high-resolutions and thus it may reduce the user-immersion into the system. In this paper, we propose portable projection-based display system, which overcomes the limitations of both projection-based and mobile-based AR systems. We have conducted the user evaluation to verify the effectiveness and the utmost capacity of the system.

• 대한공업교육학회지
• /
• v.43 no.1
• /
• pp.94-113
• /
• 2018

The purpose of this study is to develop a using various convex lenses 'VR glasses' instructional materials for area of communication technology of the 2015 Revision Curriculum in middle school. This study was progressed depend on ADDIE model. In the analysis step, a necessity of developing the instructional materials was confirmed through social needs and leaner's needs and literature researches were reviewed about the 2015 Revision Curriculum and virtual reality and confirmed the area of communication technology related to VR glasses. The communication process of information was selected as a communication technology area related to VR glass. In the design step, Based on the analysis stage, instructional objectives were set and instructional method and medium were selected. In the development step was developed instructional materials, what are teaching-learning guidance, power-point presentations, the paper for group learning activities, Individual portfolio, and using various convex lenses VR glasses example. As a result of 'VR glasses' using various convex lenses, the viewing angle was enlarged when the diameter of the convex lens was large, but it was difficult to quantify it. In the implementation step, the instructional materials developed for middle school students was applied. In the evaluation step, instructional materials were modified and improved through a students evaluation, experts evaluation.

• Progress in Medical Physics
• /
• v.15 no.2
• /
• pp.84-93
• /
• 2004

Stereotactic radiosurgery (SRS) is a technique that delivers a high dose to a target legion and a low dose to a critical organ through only one or a few irradiations. For this purpose, many mathematical methods for optimization have been proposed. There are some limitations to using these methods: the long calculation time and difficulty in finding a unique solution due to different tumor shapes. In this study, many clinical target shapes were examined to find a typical pattern of tumor shapes from which some possible ideal geometrical shapes, such as spheres, cylinders, cones or a combination, are assumed to approximate real tumor shapes. Using the arrangement of multiple isocenters, optimum variables, such as isocenter positions or collimator size, were determined. A database was formed from these results. The optimization procedure consisted of the following steps: Any shape of tumor was first assumed to an ideal model through a geometry comparison algorithm, then optimum variables for ideal geometry chosen from the predetermined database, followed by a final adjustment of the optimum parameters using the real tumor shape. Although the result of applying the database to other patients was not superior to the result of optimization in each case, it can be acceptable as a plan starling point.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1427-1435
• /
• 2010

A mixed finite element model was developed using the classical plate theory to analyze the nonlinear bending of a plate. The appropriate weight functions for the constraints integrated over the domain were determined by the Lagrange multiplier method by using the principle of minimum virtual energy; which provides the constitutive relations between force-like variables and strains. All of detail terms of element wise coefficient matrices and associate tangent matrices to be used in the Newton iterative method are presented. Then, the linear solutions of the current model and those of the traditional displacement model under the SS (simple support) boundary conditions were compared with the existing analytical solution. The post-processed images of the nonlinear results of the force-like variables are presented to show the continuity of the solutions at the joint of the element boundaries. Finally, the converged nonlinear finite element solutions of the current model are compared with those of existing traditional displacement model.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.159-168
• /
• 2002

The Highway Capacity Manual(HCM) suggests estimating the average green time for the performance evaluation of the traffic actuated operation and Provides the average green time estimation model. However, the model provides with much room for improvements. This document proposes a new analytical model that overcomes the shortage of the HCM model. The average green times estimated by the HCM model and the proposed model were compared. A computer program using the proposed model was coded for the study, while the ACT348 program was used for the implementation of the HCM model Through the comparison study based on the 1,196 hypothetical simulation data surrogating field data, it was found that the average green times estimated by the proposed model yields much nicer one-to-one linear relationship to the simulation results than the ones from the HCM model in both exclusive-only and shared-permitted cases. The R2 values of the proposed and the HCM models with those cases are 0.90 and 0.56, and 0.86 and 0.57, respectively.

• Information Systems Review
• /
• v.10 no.2
• /
• pp.49-70
• /
• 2008

The increase in demand for e-learning has created a need to explore the implications of the emerging paradigm shift on the learning environment. To utilize information technology to improve learning processes, the pedagogical assumptions underlying the design of information technology for educational purposes must be understood. However, little theoretical development or empirical research has examined the learning effectiveness in web-based distance learning. In this regard, the primary purpose of this study is to investigate which factors of E-learning influence the effectiveness of education and expectation. Based on the prior studies of the education and business training field, research model and research hypotheses were developed. Factors studied in this paper were student characteristics, system environment and teacher characteristics. The result showed that the student characteristics has the significant effect on the effectiveness of education and expectation. However, the system characteristics and the teacher characteristics have the partial significant effects. This result is partially due to the subject characteristics of this study, because the subjects of this study are the students and they have already the experiences in IT and e-learning.

• Environmental and Resource Economics Review
• /
• v.15 no.2
• /
• pp.147-175
• /
• 2006

This paper attempts to incorporate three important factors-perceptions, behavior and valuation-in analysing consumers' responses to health risks from environmental pollutants. Using a survey sample of 500 consumers in the Chonbuk province area, this paper empirically investigated determinants of risk perceptions from using tap water as drinking water. Most consumers were considerably concerned about health risks from drinking tap water. Moreover, those subjective concerns were not random, but were systematically related to individuals' demographic variables such as age, gender, and family size. Those subjective beliefs also influenced respondents' purchase intentions on safer water bottles, in response to a contingent behavior question of presenting two types of water bottles. The technical risk information provided in the survey had significant effects on purchase intentions only when it was interacted with respondents' actual averting practice. In addition, the sample selection effects were present by eliminating respondents who decided not to purchase either of two types of water bottles. The potential selection bias had impacts on the coefficients of the price difference variable, and subsequently the estimates of the price increments for health risk reductions.