• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.673-684
• /
• 2003

A degenerated differential pair has been widely used as a standard topology for digitally programmable CMOS VGAs. A variable degeneration resistor has been implemented using a resistor string or R-2R ladder with MOSFET switches. However, in the VGAs using these conventional methods, low-voltage and high-speed operation is very hard to achieve due to the dc voltage drop over the degeneration resistor. To overcome this problem a new variable degeneration resistor is proposed where the dc voltage drop is almost removed. Using the proposed gain control scheme, a low-voltage and high-speed CMOS VGA is designed. HSPICE simulation results using a 0.25${\mu}{\textrm}{m}$ CMOS process parameters show that the designed VGA provides a 3dB bandwidth of 360MHz and a 80dB gain control range in 2dB step. Gain errors are less than 0.4dB at 200MHz and less than l.4dB at 300MHz. The designed circuit consumes 10.8mA from a 2.5V supply and its die area is 1190${\mu}{\textrm}{m}$${\times}$360${\mu}{\textrm}{m}$.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.43-55
• /
• 2003

A degenerated differential pair has been widely used as a standard topology for digitally programmable CMOS VGAs. A variable degeneration resistor has been implemented using a resistor string or R-2R ladder with MOSFET switches. However, in the VGAs using these conventional methods, low-voltage and high-speed operation is very hard to achieve due to the dc voltage drop over the degeneration resistor. To overcome the problem a new variable degeneration resistor is proposed where the dc voltage drop is almost removed. The proposed gain control scheme makes it easy to implement a low-voltage and high-speed VGA. This paper describes the problems existed in conventional methods, the principle and advantages of the proposed scheme, and their performance comparison in detail. A CMOS VGA cell is designed using the proposed degeneration resistor. The 3dB bandwidths are greater than 650㎒ and the gain errors are less than 0.3dB in a gain control range from -12dB to +12dB in 6dB steps. It consumes 3.1㎃ from a 2.5V supply voltage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.161-166
• /
• 2014

This Electromagnetic metal piece detection sensor, having high sensitivity even under high humidity and dust density, using LVDT was investigated. Metal detection characteristics using phase detection method, for 3 frequencies covering ELF and LF band, were experimentally measured. It was found that the sensitivity for metal and animal food, in which metal piece was included, was exponentially increased as frequency increased. Reducing cutoff frequency of LPF after PD was found to be effective to proportionally increase sensitivity. Also the sensitivity of metal piece detection was enhanced by optimizing BPF bandwidth and SNR. Metal piece detection limit using available ferrous test samples was found to be 0.7mm diameter from the experiment using 50kHz, in ELF band, which was known to have better selectivity to animal food. is an example of ABSTRACT format.

• Journal of Internet of Things and Convergence
• /
• v.8 no.4
• /
• pp.41-47
• /
• 2022

Smoothing is a transmission plan that converts video data stored at a variable bit rate into a fixed bit rate. Algorithms for smoothing include CBA, which aims to minimize the number of transmission rate increases, MCBA, which minimizes the number of transmission rate changes, and MVBA algorithms that minimize the amount of transmission rate change. This paper compares the proposed algorithm with the CBA algorithm with various video data, buffer size, and performance evaluation factors as a follow-up to the proposed smoothing algorithm that minimizes (maximizes) the transmission rate increase (decrease) when the server requires more bandwidth The evaluation factors used were compared with the number of changes in the fps rate, the minimum fps, the average fps, fps variability, and the number of frames to be discarded. As a result of the comparison, the proposed algorithm showed superiority in comparing the number of fps rate changes and the number of frames discarded.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1020-1029
• /
• 2006

Realization of high-capacity quality-of-service router needs fair packet schedulers with a lower complexity. Timestamp based fair packet schedulers have the ideal complexity of O(log V), where V is the maximum number of admitted flows, but it has been recently reduced to O(1) using bin concept. However, the latency property was deteriorated and the bandwidth utilization was also declined. In addition, traffic flows requiring strong delay bound may not be admitted. To overcome these problems, this paper proposes a Mini-Bin based Start-Time (MBST) scheduler with variable complexity and evaluates its performance. The MBST scheduler uses the timestamp calculation scheme of start-time based schedulers to enhance the bandwidth utilization and also introduces mini-bin concept to improve the latency, The performance evaluation shows that the proposed scheduler can reduce the complexity of the legacy start-tine based schedulers by $1.8{\sim}5$ times without deteriorating the bandwidth utilization property.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.277-285
• /
• 2002

This paper proposes and analyzes an error control scheme for the transmission control based real-time communication, such as FDDI, TDMA, and wireless LAN, which delivers the message according to the round robin fashion after the off-line bandwidth allocation. Taking into account the time constraint of each message, the proposed error control scheme makes the receiver transmit the error report via asynchronous traffic while the sender resend the requested message via overallocated access time which is inevitably introduced by the bandwidth allocation procedure for hard real -time guarantee. The error control procedure does not interfere other real -time message transmissions. In addition, as each frame contains the size of the message it belongs, the receiver can recognize the end of completion of message transmission. This enables earlier error report to the receiver so that the sender can cope with more network errors. The analysis results along with simulation performed via SMPL show that the proposed scheme is able to enhance the deadline meet ratio of messages by overcoming the network errors. Using the proposed error control scheme, the hard real -time network can be built at cost lower than, but performance comparable to the expensive dual link network.

• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.433-439
• /
• 2008

A moving picture in online game is one of major ways to advertise online games, which gives a lot of help in playing game. In this case, a moving picture is compressed to variable bit rate for efficient storage use and network resource efficiency. Adaptable bandwidth allocation technique builds a transmission plan of a game moving picture. And, then some frames are discarded when transmission rate by the transmission plan is larger than available transmission rate, until transmission rate satisfies available transmission rate. Thus, performance evaluation factors in adaptable bandwidth allocation technique may be dependent on discarding order of a frame which transmission rate is much influenced. In this paper, in order to show the performance, a CBA algorithm, an MCBA algorithm, an MVBA algorithm, [6] and [7] algorithm were applied to a transmission plan in the adaptable band width allocation technique using various frame discard methods and performance evaluation factors were compared in among smoothing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.65-73
• /
• 2006

The purpose of this study is to design and analyze the pre-modulation filter with the variable -3dB cutoff frequency and linear phase response for bandlimiting the allocation of radio frequency bandwidth in PCM/FM transmission system. For the implementation of this required filter, the digital FIR filter, DAC and variable 2nd order LPF have been constructed with the filter block which designed and analyzed by each stage in order to satisfy the attenuation characteristic requirement of the analog 7th order bessel filter. The paper also concerned the linear phase properties for the filter block. Especially we have carried out the linear phase simulation with real parts for variable 2nd order LPF and compared this simulation results with the one of the fixed bandwidth 2nd order bessel filter for validating the linear phase requirement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.891-899
• /
• 2004

Ethernet passive optical network (EPON) has drawn many attention as a promising access network technology because it can provide a high bandwidth with a low cost. Since the uplink in the EPON system is shared by many users, it is necessary for an EPON system to have an efficient bandwidth allocation mechanism. In addition, as the users demand more QoS-oriented applications, it is necessary for an EPON system to have an efficient mechanism supporting QoS. In this paper, we propose a variable window dynamic bandwidth allocation (DBA) algorithm for the EPON system. Unlike the previously proposed DBA algorithms, the variable window algorithm guarantees the QoS for the highest priority class, and at the same time provides more enhanced QoS for the lower priority classes by dynamically allocating bandwidth if necessary. It is verified through the simulations that the variable window algorithm can provide more enhanced QoS performance than other DBA algorithms.

• Journal of Software Engineering Society
• /
• v.25 no.2
• /
• pp.35-47
• /
• 2012

Variable Message Format(VMF) is a communications protocol that allows computers to exchange tactical military information over low-data-rate bearers. VMF is designed to define message length and structure variably in order to allow the user to transmit only the relevant information by using indicators. However, flexibility of messages makes it difficult to analyze messages structure and figure out meanings. Furthermore, whenever messages are added or modified, message processing software should be updated and distributed to systems. In this paper, we propose a systematic approach to defining VMF messages that uses the international standard notation ASN.1. By describing VMF messages in ASN.1, protocol architects can deal with VMF messages accurately and conveniently, and use various ASN.1 tool. This paper develops ASN.1 description templates for VMF message segments, and presents an approach to describing VMF messages in ASN.1 by combining the templates.