• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.54-59
• /
• 2010

This paper suggests a new data link protocol with an adaptive frame length control scheme for wireless data networks which is subject to errors that occur with time variance. We analyze the proposed scheme under a two-state markov block interference(BI) model. Numerical results show that the proposed scheme can achieve high throughput performance for both dense and diffuse burst noise channels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.155.1-155.1
• /
• 2014

Bunch compressor (BC)는 4세대 방사광가속기가 요구하는 매우 짧은 길이의 전자빔을 만들기 위해서 제작된다. 4개의 이극전자석을 이용하여 에너지에 따른 서로 다른 경로차이를 발생시켜 전자빔을 압축할 수 있다. 중간에 위치한 2개의 이극전자석은 전자빔의 길이를 최적화하기 위하여 전자빔에 수직방향으로 가변된다. 전자빔의 궤도와 진공용기 중심을 동일하게 가져가기 위해 이극전자석 진공용기 사이에는 밸로즈를 사용하였다. BC 진공용기의 요구 압력은 Pave < $5{\times}10^{-7}mbar$이며, 4개의 이온펌프(60 L/s)를 이용하여 진공 배기한다. BC 진공용기 전체 길이는 대략 16 m이며, 전자빔과 진공용기 내부 표면 거칠기와의 상호작용에 의한 Wakefield 효과를 줄이기 위해 거칠기는 Ra <250 nm 이하로 제작하였다. 본 논문에서는 현재까지 진행된 BC 진공용기 시제품 제작 현황에 대하여 보고하고자 한다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.8 no.4
• /
• pp.3-20
• /
• 1998

해쉬 함수는 임의의 길이를 갖는 메세지를 규정된 길이의 값으로 압축하는 알고리듬으로 메시지 정보의 무결정 , 사용자 인증, 바이러스 침투 예방에 응용될 수 있는 핵심 보안 알고리듬이다. 또한 안전한 해쉬 함수는 일방향성, 충돌회피성, 고속 동작성 등의 특성을 지녀야 한다. 본 노눈에서는 응용에 따라 128, 160, 192, 224, 256 비트 길이로 출력을 생성하고 암호학적으로 강력한 안전성을 지닌 해쉬 알고리듬(HAVES: Hash Algorithm with Variable IEngth Speed)을 제안한다. 이 해쉬 알고리듬은 메시지 블록을 1024비트 단뒤로 처리하고 연산의 효과적인 배열을 통해 비교적 빠른 속도로 동작한다. 제안하는 해쉬 알고리듬은 0-1 균형성(Balancedness), 높은 비선형성(Nonlinearity), 구조적인 선형 비등가성 (Linearly Inequivalent), 상호 출력 무상관성(Mutually Output Uncorrelated), SAC(Strict Avalanche Criterion)를 모두 만족함으로서 효율성과 안전성을 도모한다. 더불어 안전성이 요구되는 실용적인 응용에 맞게 출력 길이를 가변적으로 선택할 수 있도록 했다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.9-16
• /
• 2006

Many image and video compression algorithms work by splitting the image into blocks and producing variable-length code bits for each block data. If variable-length code data are transmitted consecutively over error-prone channel without any error protection technique, the receiving decoder cannot decode the stream properly. So the standard image and video compression algorithms insert some redundant information into the stream to provide some protection against channel errors. One of redundancies is resynchronization marker, which enables the decoder to restart the decoding process from a known state in the event of transmission errors, but its usage should be restricted not to consume bandwidth too much. The Error Resilient Entropy Code(EREC) is well blown method which can regain synchronization without any redundant information. It can work with the overall prefix codes, which many image compression methods use. This paper proposes EREREC method to improve FEREC(Fast Error-Resilient Entropy Coding). It first calculates initial searching position according to bit lengths of consecutive blocks. Second, initial offset is decided using statistical distribution of long and short blocks, and initial offset can be adjusted to insure all offset sequence values can be used. The proposed EREREC algorithm can speed up the construction of FEREC slots, and can improve the compressed image quality in the event of transmission errors. The simulation result shows that the quality of transmitted image is enhanced about $0.3{\sim}3.5dB$ compared with the existing FEREC when random channel error happens.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.77-85
• /
• 1994

In this study an adaptive algorithm with optimum convergence factor for steepest descent method is proposed, which controls automatically the filter order to take the appropriate level. So far, fixed order filters have been used when adaptive filter is employed according to the priori knowledge or experience in various adaptive signal processing applications. But, it is so difficult to know the filter order needed in real implementations that high order filters have to be performed. As a result, redundant calculations are increased in the case of high order filters. The proposed variable length optimum convergence factor (VLOCF) algorithm takes the appropriated filter order within the given one so that the redundant calculation is decreased to get the enhancement of convergence speed and smaller convergence error during the steady state. The proposed algorithm is evaluated to prove the validity by computer simulation for system Identification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2543-2551
• /
• 1997

This paper proposes a compression technique of image data, a variable length PN code and channel models which are required in CDMA communication system. It also analyzes their performances. Original images is compressed by 2-D DCT and its coefficients are quantized by optimal quantizer at compression rate 0.84bit/pel. Channel model 1 and 2 which are composed of 5 and 4 channels respectively are employed to be used in CDMA. Such a situation forces us to empoly variable length PN code, such as Chebyshev map for spread spectrum system. When average PN code length of model 1 and 2 is 44.4 and 26.7 chips respectively, the received image through these models under Gaussian noise with variance 1.75 is visually of the same quality as the transmitting image. Thus, the model 2 appears to be better in channel efficiency, comparing with channel model 1 and channel model which uses fixed length PN code.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.458-465
• /
• 2011

UAV-UGV teaming concept has been proposed that can compensate for weak points of each platform by providing carrying, launching, recovery and recharging capability for the VTOL-UAV through the host UGV. The teaming concept can expand the observation envelop of the UGV and extend the operational capability of the UAV through mechanical combination of each system. The spherical-shaped coaxial rotorcraft UAV is suggested to provide flexible and precise interface between two systems. Hybrid navigation solution that included vision-based target tracking method for precision landing is investigated and its experimental study is performed. Feasibility study on length-variable rotor to provide the compact configuration of the loaded rotorcraft platform is also described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.209-215
• /
• 2010

This paper describes a design of variable-length FFT/IFFT processor (VL_FCore) for OFDM-based multi-standard communication systems. The VL_FCore adopts in-place single-memory architecture, and uses a hybrid structure of radix-4 and radix-2 DIF algorithms to accommodate various FFT lengths in the range of $N=64{\times}2^k\;(0{\leq}k{\leq}7)$. To achieve both memory size reduction and the improved SQNR, a two-step conditional scaling technique is devised, which conditionally scales the intermediate results of each computational stage. The performance analysis results show that the average SQNR's of 64~8,192-point FFT's are over 60-dB. The VL_FCore synthesized with a $0.35-{\mu}m$ CMOS cell library has 23,000 gates and 32 Kbytes memory, and it can operate with 75-MHz@3.3-V clock. The 64-point and 8,192-point FFT's can be computed in $2.25-{\mu}s$ and $762.7-{\mu}s$, respectively, thus it satisfies the specifications of various OFDM-based systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.189-195
• /
• 2008

The OFDMA Physical layer in the WiMAX standard of IEEE 802.16e adopts 114 LDPC codes with various code rates and block sizes as a channel coding scheme to meet varying channel environments and different requirements for transmission performance. In this paper, the performances of the LDPC codes are evaluated according to various code rates and block-lengths throueh simulation studies using min-sum decoding algorithm in AWGN chamois. As the block-length increases and the code rate decreases, the BER performance improves. In the cases with code rates of 2/3 and 3/4, where two different codes ate specified for each code rate, the codes with code rates of 2/3A and 3/4B outperform those of 2/3B and 3/4A, respectively. Through the statistical analyses of the number of decoding iterations the decoding complexity and the word error rates of LDPC codes are estimated. The results can be used to trade-off between the performance and the complexity in designs of LDPC decoders.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.185-192
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Caucasian and African American. Material and methods: The size and shape of these trays were designed from the results of the dental arch size of Korean adults. Tray samples were made by CAD-CAM working. Sixty Caucasian (male:30, female:30) and sixty African American (male:30, female:30) were selected for taking irreversible hydrocolloid impression using these trays. The author measured the width and length of impression material on the several measuring points. Results: 1. Uniform impression material width was achieved by controling the width of the tray using stops and beveled guides. 2. In the maxillary tray on the Caucasian, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 13.0 mm. 3. In the maxillary tray on the African American, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 12.0 mm, posterior palatal part 11.0 mm and the labial frenum width was 11.0 mm. 4. In the maxillary tray on the African American, the impression material width of posterior border (0.8 mm) was measured to be small. 5. In the mandibular tray on the Caucasian, the impression material width was measured (2.7-6.7 mm) and posterior border width (2.1 mm) was measured small. The impression material length was measured (2.8-6.7 mm). 6. In the mandibular tray on the African American, the impression material width was measured to be rather great showing width of the labial frenum 9.2 mm and the width of posterior border was measured too small (0.3 mm). Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Caucasian and African American, we can take more easy and accurate dental impressions.