• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.6
• /
• pp.447-454
• /
• 2013

A model-based method is proposed to diagnose the gear crack in the gearbox under variable loading condition with the objective to apply it to the wind turbine CMS(Condition Monitoring System). A simple test bed is installed to illustrate the approach, which consists of motors and a pair of spur gears. A crack is imbedded at the tooth root of a gear. Tachometer-based order analysis, being independent on the shaft speed, is employed as a signal processing technique to identify the crack through the impulsive change and the kurtosis. Lumped parameter dynamic model is used to simulate the operation of the test bed. In the model, the parameter related with the crack is inversely estimated by minimizing the difference between the simulated and measured features. In order to illustrate the validation of the method, a simulated signal with a specified parameter is virtually generated from the model, assuming it as the measured signal. Then the parameter is inversely estimated based on the proposed method. The result agrees with the previously specified parameter value, which verifies that the algorithm works successfully. Application to the real crack in the test bed will be addressed in the next study.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.53-60
• /
• 2009

Motion estimation for H.264/AVC video CODEC is very complex and requires a huge amount of computational efforts because it uses multiple reference frames and variable block sizes. We propose the architecture of high-performance integer-pixel motion estimation circuit based on fast algorithms for multiple reference frame selection, block matching, block mode decision and motion vector estimation. We also propose the architecture of high-performance interpolation circuit for sub-pixel motion estimation. We described the RTL circuit in Verilog HDL and synthesized the gate-level circuit using 130nm standard cell library. The integer-pixel motion estimation circuit consists of 77,600 logic gates and four $32\times8\times32$-bit dual-port SRAM's. It has tile maximum operating frequency of 161MHz and can process up to 51 D1 (720$\times$480) color in go frames per second. The fractional motion estimation circuit consists of 22,478 logic gates. It has the maximum operating frequency of 200MHz and can process up to 69 1080HD (1,920$\times$1,088) color image frames per second.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.113-122
• /
• 2008

This study extended Park et al.(2007c), which analyzed the efficiency of a hierarchical transit network, showed the result of a real data, and analyzed its applicability. Operating cost was estimated using a model which was established in this study, and minimum transit demand was derived from the operating cost. The minimum transit demand value is just a sample calculation, thus it varies by many inside and outside factors of the model. Looking at the inside of the model, operating cost and travel speed are major factors, and the possibility of introducing urban subway becomes high when the operating cost of the transit system is low and its travel speed is high. As far as the outside factors are concerned, according to the analysis on the network structure, transit demand, and transit mode share, the minimum transit demand value which was derived in this study will be the maximum value among the possible values. In the feasibility study, the benefit is likely to be overestimated and the cost is likely to be underestimated than those of this study. It could be concluded that the methodology of a feasibility study is appropriate in the field standard. This study analyzed the efficiency of introduction of urban subway using analytical approach, thus has many shortcomings and limitations. However the practical approach, like feasibility study, has some limitations as well. This study could be a basis on establishing an analysis framework that is more accurate and reasonable by comparing analytical approach and practical approach.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.835-849
• /
• 2013

Joint Collaborative Team on Video Coding (JCT-VC), which have founded ISO/IEC MPEG and ITU-T VCEG, has standardized High Efficiency Video Coding (HEVC). Standardization of HEVC has started with purpose of twice or more coding performance compared to H.264/AVC. However, flexible and hierarchical coding block and recursive coding structure are problems to overcome of HEVC standard. Many fast encoding algorithms for reducing computational complexity of HEVC encoder have been proposed. However, it is hard to implement a real-time HEVC encoder only with those fast encoding algorithms. In this paper, for implementation of software-based real-time HEVC encoder, data-level parallelism using SIMD instructions and CPU/GPU multi-threading methods are proposed. And we also proposed appropriate operations and functional modules to apply the proposed methods on HM 10.0 software. Evaluation of the proposed methods implemented on HM 10.0 software showed 20-30fps for $832{\times}480$ sequences and 5-10fps for $1920{\times}1080$ sequences, respectively.

• Korean journal of communication and information
• /
• v.63
• /
• pp.5-25
• /
• 2013

Korean society suffers from severe divisions represented by bi-polarization and collapse of the middle class. Intensive demanding on expanding social welfare budget has emerged in accordance with such a dramatic shift. Social consensus moving toward well-financed welfare policy, however, happens to meet political opposition supported by the discourse of fiscal soundness. This paper thus pays particular attention to deciphering the discursive structure in way of understanding how discourses bring public policy into play. For this purpose, news articles about fiscal soundness collected from 8 national newspapers have been analyzed in terms of frame, attitude, perspective and world view. Research results show, first of all, that there exist persistent competition between two frames identified as 'reduced tax with fiscal discipline' and 'increased tax with welfare money.' While the 'reduced tax' frame favors in maintaining tax cut at the expense of welfare budjet, the frame of 'increased tax' supports such arguments as the flexible employment of fiscal soundness and prosperity of national community helped by widening tax revenues. Also did these frames include a number of sub-frames like welfare populism, partisan politics, trickle down effect, tax bonanza for the rich, universal welfare and market over-reactions in order to bolster its logical authority. Media's active taking a part in penetrating supportive frames in line with political stance was found as well. Taking into account both the discursive structure upheld by frames and politics materialized by the media, the authors argue that public policies should be considered more as discourse than fixed reality. Shedding additional light on understanding the interplay among public opinion, policies and media discourse is of another importance for further study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.361-361
• /
• 2013

비냉각 적외선 검출소자는 빛이 전혀 없는 환경에서도 사물을 감지하는 열상장비의 핵심소자이다. 마이크로볼로미터 적외선 검출기는 상온에서 동작하며, 온도안정화를 위해 TEC를 장착하여 진공패키지로 조립된다. 패키지는 진공을 유지할 수 있도록 일반적으로 메탈로 제작되며, 단가 감소 및 생산성 증대를 위해 wafer level packaging 방법을 이용한다. 마이크로볼로미터의 특성은 패키지의 진공 변화에 매우 민감하다. 센서의 감도를 증가시키기 위해서는 진공환경을 유지해야 한다. 볼로미터 소자의 특성은 상압에서 열전도는 기판과 멤브레인 사이의 에어갭을 통해 열손실을 야기하므로 센서의 반응도가 현저히 줄어든다. 에어갭이 1 um 정도 되더라도 그 사이에 존재하는 열전도가 가능하므로 진공을 유지하여 열고립 상태를 증대시킬 수 있다. 이에 본 연구에서는 소자의 동작시 압력, 즉 진공도가 볼로미터 소자의 반응도 특성에 미치는 영향을 조사하였다. 마이크로볼로미터 소자는 $2{\times}8$ 어레이 형태로 제작하였으며, metal pad를 각 단위셀에 배치하였으며, 공통전극으로 한 개의 metal pad를 넣어 설계하였다. 흡수체로써 VOx를 사용하였으며, 열 고립구조를 위해 2.5 um 공명 흡수층의 floating 구조로 멤브레인을 형성하였다. 진공패키지는 메탈패키지를 제작하여 볼로미터 칩을 TEC 위에 장착하였으며, 신호의 감지를 위해 가변저항을 매칭시켰다. 반응도는 신호 대 잡음 값을 획득하여 소자에 도달하는 적외선 에너지에 대해 반응하는 값을 계산에 의해 얻어내는 것이다. 픽셀 크기는 $50{\times}50$ um이며, 패키지 조립 공정 후 온도변화에 따른 저항 측정을 통해 TCR 값을 얻었다. 이때 TCR은 약 -2.5%/K으로 나타났다. $2{\times}8$의 4개 단위소자에 대해 측정한 값은 균일하게 TCR 값이 나타났다. 광반응 특성은 볼로미터 단위소자에 대해서 먼저 고진공(5e-6 torr) 하에서 측정하였으며, 반응도는 25,000 V/W의 값을 나타내었고, 탐지도는 약 2e+8 $cmHz_{1/2}$/W로 나타났다. 패키지의 압력 조절을 위해 TMP 및 로터리 펌프를 이용하여 100 torr에서 1e-4 torr의 범위에서 압력조절 밸브를 이용하여 질소가스의 압력으로 진공도를 변화시켰다. 적외선 반응신호는 압력이 증가함에 따라 감소하였으며, 2e-1 torr의 압력에서 신호의 크기가 감소하기 시작하여 5 torr에서 반응도의 1/2 값을 나타냄을 알 수 있었다. 30 torr 이상에서는 신호가 잡음값 과거의 동일하여 신호대 잡음비가 1로 나타남을 알 수 있었다. 또한 진공도 변화에 대해, 흑체온도에 따른 반응도 및 탐지도의 특성을 조사한 결과를 발표한다. 반응도의 증가를 위해 진공도는 진공도는 1e-2 torr 이하의 압력을 유지해야 함을 본 실험을 통해 알 수 있었다.

• Journal of Adhesion and Interface
• /
• v.11 no.2
• /
• pp.41-49
• /
• 2010

Furan-containing epoxide monomers (8, 9) were designed and synthesized as carbon-neutral, environment-friendly adhesion material. Bicyclic skeleton were constructed using the Diels-Alder reaction of furan and methyl acrylate, both readily accessible starting material from a biomass via bio-refinery process. After reduction of ester functionality, resulting hydroxyl moieties were coupled to epichlorohydrin to provide the epoxy-functionalized furanic monomers (8, 9). The structure of new furanic monomers was confirmed by $^1H$ and $^{13}C$ NMR spectroscopy. As UV-curable monomers, basic properties such as UV curing time and the extent of UV curing were evaluated by photo DSC. Photo-curing shrinkages were measured by linear variable differential transformer transducer (LVDT) and the effect of molecular structure on shrinkage was considered. In addition, new synthetic compounds showed the shear strength over 3 MPa when they were photo-cured between polycarbonate plates, which indicates these compounds are feasible to use as photo-curable adhesive materials.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.293-297
• /
• 2015

Underwater acoustic communications has been limited use for military purposes in the past. However, the fields of underwater applications expend to detection, submarine and communication in recent. The excessive multipath encountered in underwater acoustic communication channel is creating inter symbol interference, which is limiting factor to achieve a high data rate and bit error rate performance. To improve the performance of a received signal in underwater communication, many researchers have been studied for channel coding scheme with excellent performance at low SNR. In this paper, we applied BCJR decoder based ( 2,1,7 ) convolution codes and to compensate for the distorted data induced by the multipath, we applying the turbo equalization method. Through the underwater experiment on the Gyeungcheun lake located in Mungyeng city, we confirmed that turbo equalization structure of BCJR has better performance than hard decision and soft decision of Viterbi decoding. We also confirmed that the error rate of decoder input is less than error rate of $10^{-1}$, all the data is decoded. We achieved sucess rate of 83% through the experiment.

• Archives of design research
• /
• v.12 no.4
• /
• pp.283-292
• /
• 1999

As network and multimedia service has increased in educational environment, it is needed to study on digital system based educational scenarios, especially in art and design departments in which visual educational materials mainly used. Therefore, this study was conducted with three objectives: first, developing components of design database and their classification system, second, developing contents of database for fundamental form education in design, and third, developing application method of database. According to these objectives, the secondary research was implemented into two directions; the analysis of classification categories of design, and the analysis of contents and process of fundamental form design education. From the secondary research, it was found that design database should have a flexible structure with flexible components as well as fixed components to include subjective and aesthetic assessment. In the end, the application methods and user interface system of design database was developed based on design educational scenarios.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.533-535
• /
• 2002

The new watering system for the cabinet type of soybean sprouting equipment was developed. It was made of one siphon $({\Phi}35 mm)$, one well bucket $(13{\times}10{\times}10\;cm)$ that its weight-center is changed by water level, and bottle-neck water tank (bottom: $18.5^W{\times}32^L{\times}29^H\;cm$, top: $14^W{\times}14^L{\times}25^H\;cm)$. The watering system can be automatically watered more than 750 mL/sec without electric supply. The soybean sprouting equipment is consisted of the watering system and nine sprouting buckets. In addition siphon phenomena brought about easily by narrowing same as bottle-neck shape top portion of water tank that inserted a siphon. The equipment with the watering system may be produced more than three box a day in the condition of $25{\pm}1^{\circ}C$, and $6{\sim}7$ watering times a day.