• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.763-767
• /
• 2010

High-pressure phase behavior for the binary mixture of 1-propanol with supercritical $CO_2$ has been measured by means of a high-pressure phase equilibrium apparatus equipped with a variable-volume view cell. The equilibrium loci of the pressure - composition and pressure - temperature were obtained for the binary mixture of 1-propanol + $CO_2$ system at 305.15 K, 313.15 K, 323.15 K and 333.15 K, and from 2 MPa to 11 MPa. The critical temperature of the mixture increased with the temperature. The pressure-composition line for the binary mixture of $CO_2$-1-propanol system showed a typical type-II phase behavior. The experimental P-x envelopes were correlated by using the Peng-Robinson equation of state in a satisfactory manner to obtain the parameters with $k_{ij}=0.116$ and ${\eta}_{ij}=-0.065$.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2014

In this study, the effect of the automotive haptic-seat technology which can transmit the driving information by the vibro-stimulus from the seat was investigated to overcome previous system's limitation relied on the visual and audial method and to help handicap driving. A prototype haptic seat covers with 30 coin-type motors and driver module were developed for this sake. A driving simulator on the 6-DOF motion-base was used for driving situation and we executed the seat vibro-stimulus test with 10 young participants who have normal tactile sense. The haptic recognition ratio by 30 locations was measured and analyzed in the result. The intensity of vibro-stimulus was adjusted by input voltage of motors (1.5V,2.5V,3.5V). All vibro-stimulus locations at 2.5V and 3.5V could be recognized by all participants and even in the lowest recognition ratio of 1.5V. The results showed that the seat vibration stimulus could be useful to transfer the drivers' information while driving.

• Journal of the Korea Society for Simulation
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2014

A cloud computing is one of a parallel and distributed computing. The cloud computing provides some service for user with virtual resources. However, a user's service request does not show a time pattern. As a result, each resource also shows a different availability at the same time. This difference affects a quality of service (QoS) and a resource selection for users. Therefore, we propose the resource availability-based multi auction model for cloud service reservation and resource brokering system. The proposed system is to select the proper resource provider based on the users' request. The proposal adopts the multi phase of the auction to transact resources. The system evaluates the available factor of each resource on the auction phase, and finally reserves the service on the adaptive queue. The proposed model shows the better performance than other existing method.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.763-765
• /
• 2005

DVS(dynamic voltage sealing)은 이동형 프로세서에서 에너지 효율을 높이기 위한 필수 요소로 자리 잡고있다. DVS를 효과적으로 사용하기 위해선 대상 태스크의 특성과 하드웨어 특성에 맞는 DVS 알고리즘이 필요하다. 상품화 수준의 않은 운영체계들이 일정한 인터벌(interval)을 바탕으로 시스템 사용 상황을 분석하여 목표 성능을 결정하는 방식을 사용하고 있다. 이러한 방식은 태스크의 특성이 갑자기 변하여 성능을 요구할 경우 인터벌만큼의 시간이 진행된 후에야 반응 한다는 단점이 있다. 또한, 태스크 별 특성이 아닌 시스템 전체의 특성을 따르므로 이질적인 성격의 태스크들이 동시에 실행 되는 환경에는 적합하지 않다. 최근의 모바일 프로세서들은 수 마이크로초 수준의 성능 전환 시간을 제공하고 있으며 이 속도는 계속 줄어들고 있다. 프로세서의 고성능화로 인해 I/O 작업의 경우 프로세서 성능에 따른 실행 시간의 차이가 존재 하지 않는다. 이러한 두 가지 특성을 바탕으로 우리는 TIB(timer interrupt based) 알고리즘을 제안한다. TIB 알고리즘은 일정한 길이의 인터벌 대신 타임 슬라이스(time slice)를 성능 결정의 단위로 삼는다. 성능의 결정은 태스크 별로 이루어지며 각 태스크가 사용했던 이전 타임 슬라이스가 타이머 인터룹트(timer interrupt)에 의해 끝났다면 최대의 성능을 그 외의 경우는 최저의 성능으로 실행하게 된다. 이러한 접근 방식을 통해 I/O 작업이나 이벤트를 기다리는 태스크에 대해 최저 성능을 제공함으로써 실행 시간의 적은 손해를 대가로 많은 에너지 절감을 이룰 수 있다. 또한, 태스크의 속성이 변한 경우 타임 슬라이스 길이 만큼의 지체만을 허용하게 된다. 이러한 TIB 인터벌에 기반한 알고리즘에 비해 개별 태스크의 특성에 따른 성능 조절과 태스크의 변화에 따른 빠른 반응을 자랑으로 한다. 본 논문에선 TIB 알고리즘을 리눅스 커널에 구현하여 성능을 평가하였고 그 결과 리눅스에서 사용되는 기존 인터벌 기반의 알고리즘들에 비해 좋은 전력 절감 효과를 얻을 수 있었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.385-394
• /
• 2006

The application areas of traditional push-pull converters are limited because the voltage stress of switches is high (twice of the input voltage). But the push - pull converter topology is suitable for unregulated low-voltage to high-voltage power conversion such as the fuel cell. This paper presents a novel power converter structure that is very suitable for the DC/DC converter in fuel cell systems. Based on this structure, a ZVS- ZCS push-pull converter is proposed. The switches of the proposed push-pull converter can operate under ZVS or ZCS condition with the help of a new passive clamping circuit. The passive clamping techniques solves the voltage overshoot problem. Because the buck converter circuit operates at twice the synchronous switching frequency of the push-pull converter, the peak current in the current-fed inductor and transformer is reduced. The operation principle of the proposed converter is analyzed and verified by simulations and experimental results. A 1 kW DC/DC converter was implemented with DSP TMS320F2812, from which experimental results have shown that efficiency improvement and surge suppression can be achieved effectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2326-2333
• /
• 2009

In the adaptable bandwidth allocation technique, a transmission plan for variable rate video data is made by smoothing algorithms such as CBA algorithm and the data is sent by the transmission plan considering network traffic. But the CBA algorithm, the MCBA algorithm, MVBA algorithm and the other smoothing algorithms produce a transmission plan where the size of the increasing interval of transmission rate is generally larger than the size of the decreasing interval. And the transmission rate in CBA algorithm, the MCBA algorithm, the MVBA algorithm is changed in overflow curve during the increasing interval of transmission rate. This may cause many frames to be discarded when available transmission rate is larger than transmission rate by the transmission plan. In this paper, the smoothing algorithm, where transmission rate is changed in the middle of underflow curve and overflow curve to decrease the number of discarded frames, but the transmission rate increases at the minimum, and the CBA algorithm, the MCBA algorithm, the MVBA algorithm are applied to a transmission plan in the adaptable bandwidth allocation technique, and the minimum frame rates, the average frame rates, the variation of frame rates, and the numbers of discarded frames are compared in among algorithms.

• Korean Journal of Optics and Photonics
• /
• v.31 no.1
• /
• pp.31-36
• /
• 2020

We propose a band-switchable terahertz metamaterial based on an etched vanadium dioxide (VO₂) thin film. A line of etched VO₂ thin film was placed in the center gap of the split square-loop shape for the tunability of the metamaterial. The resonance frequency of the metamaterial can be switched from the 1.4 THz band to the 0.7 THz band, according to the insulator-metal phase transition in the VO₂ thin film. The absolute difference in the transmittance of the metamaterial was 78.5% and 65.8% at 0.7 THz and 1.4 THz respectively, according to the band switching. The differential phase shift was around 90°, and the transmittance was stably maintained between 40% and 60% in the middle band of the two switchable resonance-frequency bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.307-313
• /
• 2019

The traveling wave tube amplifier (TWTA), which can be applied to the Ka-band millimeter-wave multi-mode seeker, consists of an high voltage power supply(HVPS), a grid modulator, a command and control, and an RF assembly. We designed a power supply that generates a -17.9 kV high voltage by synchronizing the pulse repetition frequency(PRF) and power supply switching frequency(i.e. synchronization frequency), and a high-speed grid-switching modulator for RF pulse modulation. The TWTA, which is fabricated through miniaturization with a volume of 3.18 L, has high pulse switching characteristics of up to 18.5 ns. The maximum rise/fall time of the grid on/bias signal and peak power is more than 564.9 W. Moreover, an excellent spurious performance of -68.4 dBc or less was confirmed within the range of PRF and PRF/2.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.21 no.1
• /
• pp.24-39
• /
• 2022

This study was conducted to provide implications so that teachers' voices are heard in the social consensus for future schools by exploring teachers' needs for future school spaces. A qualitative study was performed to listen to teachers' voices directly, and 10 teachers from "A" Elementary School (tentative name) participated in the study. The study 1) recognized the emergence of learning that transcends time and space, and emphasized the importance of an ICT-based informatization environment that can support such learning, 2) confirmed the characteristics of futuristic school spaces centered on "tradition" and "technology," 3) recognized the importance of learning community spaces, 4) emphasized "variable" classrooms for flexible teaching and learning activities, and 5) confirmed the need to introduce eco-friendly elements and provide support for those who may be vulnerable in high-tech learning environments. Finally, the study concluded that teachers need systematic education and experiences that contain sufficient important discourses related to future schools such as "eco-friendliness" and "connection with local communities".

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.430-436
• /
• 2014

The mission objective of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) classified as a pico-class satellite is to verify the technical effectiveness of payloads such as variable emittance radiator, SMA washer, oscillating heat pipe and MEMS based solid propellant thruster researched at domestic universities. In addition, the MEMS concentrating photovoltaic power system and the non-explosive holding and separation mechanism with the advantages of high constraint force and low shock level will be developed as the primary payloads for on-orbit verification. In this study, the feasibility of the mission actualization has been confirmed by the preliminary system design.