• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.1-5
• /
• 2006

Birds and insect in nature morph their mean camberline shapes to obtain both lift and thrust simultaneously. Previous unsteady thin airfoil theories were derived mainly for a rigid flapping airfoil. An extended unsteady thin airfoil theory for a deformable airfoil is required to analyze the unsteady two-dimensional aerodynamic characteristics of a biomorphing wing. Theodorsen's approach is extended to calculate the unsteady aerodynamic characteristics of a biomorphing airfoil. The mean camberline of the airfoil is represented as a polynomial. The unsteady aerodynamic characteristics of the morphing airfoil are represented as noncirculatory and circulatory terms. Present theory can be applied to the unsteady aerodynamic analysis of a flapping biomorphing airfoil and the aeroelastic analysis of a morphing wing.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.106-112
• /
• 1996

본 연구에서는 보다 향상된 정,동특성을 가지는 베어링을 구현하기 위하여 PZT 구동에 의해 가변 간극 형상을 갖도록 베어링 외경부를 강제로 변형시킨 중심 고정형 다이어프램을 생각하고, 우선적으로 이러한 가변 간극 형상의 외부가압기체 드러스트 베어링의 정특성을 해석 및 실험하여 그 개선된 성능을 알아보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2854-2865
• /
• 1996

The concept of variable-geometry truss structure(VGTS) is introduced as a class of actively controlled adaptive structure. VGTS can purposefully vary its geometric configurations by changing the lengths of some members of the structure. General kinematics and inverse kinematics of a statically determinate VGTS(variable geometry truss structure) are studied. The solution technique is based on the Jacobian matrix obtained via joint equilibrium equations. Pseudoinverse control method is applied to resolve the redundancy of a large VGTS. two types of actuator layout of octahedral type VGTS, VG truss and Stewart platform, are compared. Introducing the concept of performance index, Stewart platform based layout was found to has less consumption energy and manipulation time. A functional VGTS model with 3 octahedral modules is designed and manufactured for the labaratory demonstration. Six vertically located length-variable members are used to create general 6 d.o.f. motions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.153-156
• /
• 2011

Steady state experiment was carried out for modulatable thruster applications, with four different pintles. Results show that thrust can be modulated by changing nozzle throat area with pintle penetration. However, effect of pintle shape on the thruster performance is yet to be concluded.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.549-556
• /
• 2010

In general, materials that can be used to form elastic pads, such as urethane and rubber, are often used in flexible forming processes by inserting the pads between a blank and flexible die for smoothing the forming surface that is formed by a reconfigurable die. In this study, the effects of the elastic pad on formability in the flexible forming process for sheet metals are investigated by performing numerical simulations. In the simulation, the hyperelastic material model is used, where the urethane elastic pads serve as elastic cushions. Case studies are carried out for elastic materials with different hardness values and thicknesses. The results are used to evaluate formability by comparing the configuration of the deformed blank and its major cross-sectional profiles. It is verified that the elastic pad used in the flexible forming process for sheet materials should be hard and that its thickness should be chosen appropriately.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.473-474
• /
• 2019

무선전력전달 시스템을 위한 코일을 설계함에 있어 코일 및 코어의 치수, 재료 및 형상은 효율과 직관된 요소이므로 가장 적절한 선택이 필요하다. 하지만 높은 효율을 가지는 무선전력전달 시스템을 설계하더라도 실제 이격거리는 가변하므로 예상했던 효율과 다른 결과가 야기된다. 본 연구에서는 기존의 E-E 형상과 C-C 형상 및 제안한 Plat C-C 형상을 페라이트 코어를 바탕으로 x-y-z 이격거리의 변화량에 따른, 결합계수를 유한요소해석 시뮬레이션을 통해 비교 및 분석하고 200W급 하드웨어를 통해 검증한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.65-73
• /
• 2007

The use of an Exhaust Gas Recirculation(EGR) for a diesel engine with variable geometry turbocharger(VGT) has confronted how to obtain the amount of EGR for NOx reduction requirement at wide operating range and less side effect. Through a combined effort of modeling(wave action simulation) and experiment, an investigation into the effect of EGR area ratio and pipe length on EGR characteristics of common rail diesel engine with VGT has been performed. For accurate computation, calibration of constants involved in empirical and semi-empirical correlations has been performed at a specific operating point, before of its use for engine simulation. From the results of this study, it was found that EGR rate is sharply increased with increasing EGR area ratio until area ratio of 0.3. However, the effect of EGR area ratio on EGR rate is negligible beyond this criteria. This study also investigates the effect of EGR pipe length on a EGR amount and pulsating flow characteristics at EGR junction. The results showed that the longer EGR pipe length, the lower EGR amount was achieved due to the flow loss resulting in lower amplitude of pressure wave.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.65-72
• /
• 2015

In present study, a supersonic inlet for dual mode ramjets or RBCC/TBCC engines with a wide range of flight Mach numbers is designed. A conical variable inlet configuration is chosen for the inlet design. Geometric relations with angles of compression cones and conical shock waves are used for the design of the inlet configuration. The performance of the supersonic inlet is confirmed by the numerical analysis. The capture area ratio is maintained around 100% from Mach 3 to 8 conditions.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.27-36
• /
• 2007

Changeable biometrics identify a person using transformed biometric data instead of original biometric data in order to enhance privacy and security in biometrics when biometric data is compromised. In this paper, a novel scheme which generates changeable face templates for statistical appearance-based face recognition is proposed. Two different original face feature vectors are extracted from two different appearance-based approaches, respectively, each original feature vector is normalized, and its elements are re-ordered. Finally a changeable face template is generated by weighted addition between two normalized and scrambled feature vectors. Since the two feature vectors are combined into one by a two to one mapping, the original two feature vectors are not easily recovered from the changeable face template even if the combining rule is known. Also, when we need to make new changeable face template for a person, we change the re-ordering rule for the person and make a new feature vector for the person. Therefore, the security and privacy in biometric system can be enhanced by using the proposed changeable face templates. In our experiments, we analyze the proposed method with respect to performance and security using an AR-face database.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.20-27
• /
• 2001

A variable configuration tracked vehicle(VCTV) is developed to reduce turning energy and improve climbing ability for stairs. This mechanism has four track T-type frames. By changing the driving direction, each track T-type frame rotates to minimize the contact area with ground. It also has better performance than other VCTV in energy consumption of turning. Futhermore this mechanism is more stable than other VCTV on the rough terrain. When climbing stairs, each track T-type frame rotates to obtain a front attack angle and keep stability on steep stairs. The design parameters of components of track T-type frames are optimized to enhance the performance of climbing stairs. Performance indices include a stable angle, a climbing ability, a height of the vertical obstacle. In case that the overall length of the mechanism is 0.2m, it is required that the radius of the wheels should be 5mm and the length track contacted with he ground should be 0.09m to climb higher and steeper stairs.