• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.117-122
• /
• 2000

풍력발전시스템은 일정속과 가변속 풍력발전시스템으로 나누어진다. 일정속 풍력발전시스템은 유도발전기를 이용한 시스템이 주종을 이루고, 가변속 풍력발전시스템은 동기발전기-인버터로 이루어진다. 본 논문에서는 피치컨트롤이 장착된 두 시스템을 분석하여, 피치컨트롤의 제어 알고리즘을 유도하고 공기역학적 출력제어 국면에서 두 시스템의 출력제어를 비교 분석하고자 한다.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.12 s.108
• /
• pp.102-108
• /
• 1985

가변속시스템은 전력용 반도체소자의 발달, 마이크로엘렉트로닉스, 마이크로프로세서의 응용에 의한 제어의 고도화 등으로 지난 수년 사이에 크게 진보되었다. 여기서는 최근의 가변속시스템의 동향에 대하여 설명한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.243-250
• /
• 2010

As the wind has become one of the fastest growing renewable energy sources, the key issue of wind energy conversion systems is how to efficiently operate the wind turbines in a wide range of wind speeds. Compared to fixed speed turbines, variable speed wind turbines feature higher energy yields, lower component stress and fewer grid connection power peaks. Generally, measurement of wind speed is required for the control of variable speed wind turbine system. However, wind speed measured by anemometers is not accurate owing to various reasons. In this work, a new control algorithm for variable speed wind turbine system based on Kalman filter which can be used for the estimation of wind speed and artificial neural network which can generate optimum rotor speed is proposed. Also, to verify the feasibility of the proposed scheme, various simulation studies are carried out by using Simulink in Matlab.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.117-121
• /
• 2019

In this study, research and a demonstration for applying DC distribution systems to ships as an environmental and energy conservation solution in domestic and foreign countries were actively carried out. In order to apply a generator to a DC distribution system, a variable speed engine was used. Both engine speed and fuel consumption were reduced. In this paper, a DC generator for DC distribution was constructed using a diesel generator, a generator controller, a governor, and an AVR. A system configuration method for a generator, power quality test, and the power characteristics of a variable speed generator were analyzed. The voltage (250 - 440 VAC) and frequency (34 - 60 Hz) of the variable speed generator were set to 60 - 100 % of the rated value, and the engine was set to operate from 1100 - 1800 rpm. It was confirmed that the voltage, current, and frequency of the generator output fluctuated in a stable manner according to the power amount when changing the engine speed of the generator according to the load variation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.610-617
• /
• 2005

A variable speed wind turbine simulation model for grid connection is developed based on PSCAD/EMTDC. The model consists of wind model, rotor dynamics, synchronous generator, power converter, transformer, distribution line and infinite bus. Implementation of blade characteristics and power converter control strategies are included. Several transient case studies are performed including wind speed change, local load change and grid-side voltage unbalance using developed simulation model. The results of this work can be utilized for study of actual interaction between wind turbine and grid for reliable operation and protection of power system.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.350-351
• /
• 2018

본 논문은 가변속 양수발전 시스템의 모델링 및 양수발전용 전력변환장치 제어 구조를 분석하고 모델링하였다. 기존 양수발전 시스템은 동기 발전기를 사용하였지만 신재생 에너지원의 출력 변동 및 부하 변동에 따른 주파수의 변화에 빠른 대응을 위한 가변속 양수발전 시스템을 채용하여 계통 전력과 전압, 주파수 등을 보상한다. 양수 발전소의 터빈, 게이트, 조속기 등을 분석하여 모델링하였으며, Doubly fed induction generator를 위한 back-to-back 전력 변환 장치를 발전 및 양수 모드에 사용하기 위해 벡터제어, 속도제어, 유효-무효 전력 제어기 등을 모델링 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.128-134
• /
• 2008

The variable speed engine generator set is interested for an isolated power system due to reduced fuel consumption and less emission. However, because of sluggish dynamic behavior of the internal combustion engine the power quality would be degraded during the sudden load power surge, where the power required by the load is not available by the engine due to the reduced engine speed. An isolated power system based on variable speed engine with a super-capacitor bank can improve dynamic characteristics under such a sudden load change, and power quality, fuel consumption, and pollutants can be improved remarkably. Also, it is verified by the computer simulation that the inverter of 3phase-4leg is compatible to the isolated power system with unbalanced load. In this paper, the feasibility of the system has been verified based on a 26kw commercial diesel engine system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.666-671
• /
• 2023

As international environmental regulations on ship emissions are gradually strengthened, interest in electric propulsion and hybrid propulsion ships is increasing, and various solutions are being developed and applied to these ships, especially stabilization of the power system and system efficiency. The direct current distribution system is being applied as a way to increase the power. In addition, verification and testing of safety and performance of marine DC distribution systems is required. As a result of establishing a DC distribution test bed, verifying the performance of the DC distribution (variable speed power generation) system, and analyzing fuel consumption, this study applied a variable speed power generation system that is applied to DC power distribution for ships, and converted the power output from the generator into a rectifier. A system was developed to convert direct current power to connect to the system and monitor and control these devices. Through tests using this DC distribution system, the maximum voltage was 751.5V and the minimum voltage was 731.4V, and the voltage fluctuation rate was 2.7%, confirming that the voltage is stably supplied within 3%, and a variable speed power generation system was installed according to load fluctuations. When applied, it was confirmed through testing that fuel consumption could be reduced by more than 20% depending on the section compared to the existing constant speed power generation system.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.233-234
• /
• 2016

본 논문에서는 소형 어선의 전기 시스템을 DC 마이크로그리드의 관점에서 설계하고, 선박의 동력원인 엔진-발전기를 가변속 제어함으로써 선박 전력 계통의 효율을 개선하고자 한다. 선박 전력 계통은 물리적으로 육지 계통과 분리된 마이크로그리드의 형태를 갖추고 있다. 때문에 소형 기계 추진 어선의 경우, 추진을 위한 엔진뿐만 아니라 추가적으로 선내 전력을 공급하기 위한 엔진-발전기를 갖출 필요가 있다. 이에 반해 전기 추진 어선은 하나의 엔진-발전기 세트로 추진과 선내 전력 공급이 모두 가능하다. 하지만 어선이 정지 상태에서 조업을 할 때에 전력 부하량이 작기 때문에 엔진의 저부하 운전 문제가 발생한다. 본 논문에서는 이를 해결하기 위하여, DC마이크로그리드를 어선에 적용하여 엔진 가변속을 적용하고자 한다. 통상적으로 20% 내외의 부하율로 운용되는 엔진에 가변속 제어를 적용하면 20% 이상의 연비 개선 효과를 기대할 수 있다. 이러한 DC마이크로그리드 어선의 연비 개선 효과를 항해와 조업으로 구분하여 시뮬레이션을 통해 예측하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.828_829
• /
• 2009

본 논문에서는 가변속 펌프 시스템에 적합한 SRM의 최적 구동을 위한 예측 방법에 대해 나타내었다. 회전자의 위치에 따른 쇄교 자속 곡선 모델링을 통하여 제안된 방법에 의해 전류의 최적 인가 시점을 테이블로 구성하였으며, 이를 기반으로 SRM 제어기 및 알고리즘을 Matlab/Simulink를 이용하여 시뮬레이션을 통해 결과값을 나타내었다.