• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.3
• /
• pp.207-233
• /
• 2011

This thesis is a study of the printed books of Liudao Pushuo(六道普說), one of Mengshan(蒙山)'s works. Mengshan De-yi(德異) lived in the Song(宋) and Yuan(元) Dynasty and was a Buddhist monk of Linji Chan(臨濟宗). Liudao Pushuo exists only in Korea, and there is no copy in China. Liudao Pushuo is a summary of the preachings of Mengshan about the Ten dharma-worlds(十法界) which include the six realms(六道) and the four kinds of holy men(四聖). There are 22 printed books in Korea. This study analyzed their physical descriptions and structures. As a result, all the printed books have 'sajudanbyoun(四周單邊)' except one book that is 'julchopjang(折帖裝)' of 'Bulgapsa(佛甲寺)'. There are also ten books with 'Heukku(黑口) and naehyang heukumi(內向黑魚尾)'. This indicates that those were typical of the printing type of the early days of the Joseon(朝鮮) Dynasty. In addition, the books with 13 characters in one line(13字本) were common. All 22 printed books were published in the $15^{th}$ and 16th century. This study confirms that Liudao Pushuo was handed down in the Goryeo(高麗) from China and actively published in the 15th and 16th century. This shows that Mengshan's Seon(禪) had a significant effect on Buddhism in Korea.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.2
• /
• pp.435-455
• /
• 2020

The purpose of this study is to examine the publication, composition, method of composition, and acceptance patterns of JujaDaejeon anthologies edited by Joseon scholars in the Joseon dynasty. When a large amount of JujaDaejeon was published in the 16^th century, anthologies of JujajaDaejeon was compiled, published and learned as a way to understand it. A total of 13 kinds of JujajaDaejeon anthologies were published, including six kinds in the early Joseon period and seven kinds in the late Joseon period. And the composition of main anthologies showed a trend that was supplemented by Jeong Gyeong-se's Jumunjakhae from Lee Hwang's Jujaseojeolyo, and aggregated into Song Si-yeol's Jeoljaktongpyeon(boyu). JujaDaejeon consists of total 3,645 works except for poems. Among them, 1,734 works were selected by 13 anthologies. The theme of a work with a high cumulative number of selections is the virtue and attitude of the king, policy proposals, the appointment of talent, the duty of subjects, criteria for evaluating historical figures, opposition to harmony with Jin and territorial restoration, and academic discussions. This study is expected to be meaningful in the field of the research on the acceptance of the foreign books and acceptance of the Zhu Xi's works in the Joseon dynasty.

• Journal of Life Science
• /
• v.27 no.7
• /
• pp.746-753
• /
• 2017

In order to rapidly identify four drums species, Larimichthys polyactis, L. crocea, Atrobucca nibe, and Pseudotolithus elongates, a highly efficient and quick method has been developed using multiplex polymerase chain reaction (PCR) with species-specific primers. Around 1.4 kbp of the mitochondrial COI gene sequences from the four drums species were aligned, and species-specific forward primers were designed, based on the single nucleotide polymorphism (SNP). The optimal conditions for PCR amplification were selected through cross-reactivity, using a gradient PCR method. The PCR results demonstrated species-specific amplification for each species at annealing temperatures between 50 and $62^{\circ}C$. Multiplex species-specific PCR (MSS-PCR) amplification reactions with four pairs of primers were performed for sixteen specimens of each species. MSS-PCR lead to a species-specific amplification of a 1,540 bp fragment in L. polyactis, 1,013 bp in A. nibe, 474 bp in L. crocea, and 182 bp in P. elongates, respectively. The four different sizes of each PCR product can be quickly and easily detected by single gel electrophoresis. The sensitivity of the MSS-PCR of the DNA was up to $0.1ng/{\mu}l$ as a starting concentration for the four different species tested. These results suggest that MSS-PCR, with species-specific primers based on SNP, can be a powerful tool in the rapid identification of the four drums species, L. polyactis, L. crocea, A. nibe, and P. elongates.

• Journal of Life Science
• /
• v.30 no.7
• /
• pp.614-624
• /
• 2020

The recent development of next-generation sequencing technology has enabled increased genomic analysis, but very few single nucleotide polymorphism (SNP) markers applicable to sweet persimmon (Diospyros kaki Thunb.) cultivars have been identified. In this study, SNP primers developed from five pollination-constant astringent (PCA) persimmons native to Korea were applied to discriminate between cultivars and verify their usability. The polymerase chain reactions of 19 SNP primers developed by Jung et al. were checked, with 11 primers finally selected. The other eight were very difficult to analyze in the agarose gel electrophoresis and QIAxcel Advanced System used in this experiment and were therefore excluded. The 11 SNP primers were applied through first and second verification to 76 cultivars and collection lines including 20 pollination-variant non-astringent (PVNA), 30 pollination-constant non-astringent (PCNA), 20 PCA, and six pollination-variant astringent (PVA). Of these, 38 were indistinguishable (eight PVNA, 18 PCNA, nine PCA, and three PVA). However, the results of applying the 11 SNP primers to new sweet persimmon cultivars, namely Gamnuri, Dannuri, Hongchoo, Jamisi, and Migamjosaeng, showed that they have the potential to be used as a unique marker for simultaneously determining between them.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.123-123
• /
• 2012

최근 연구되고 있는 TSV(Through Silicon Via) 기술은 Si 웨이퍼 상에 직접 전기적 연결 통로인 관통홀을 형성하는 방법으로 칩간 연결거리를 최소화 할 수 있으며, 부피의 감소, 연결부 단축에 따른 빠른 신호 전달을 가능하게 한다. 이러한 TSV 기술은 최근의 초경량화와 고집적화로 대표되는 전자제품의 요구를 만족시킬 수 있는 차세대 실장법으로 기대를 모으고 있다. 한편, 납땜 재료의 주 원료인 주석은 주로 반도체 소자의 제조, 반도체 칩과 기판의 접합 및 플립 칩 (Flip Chip) 제조시의 범프 형성 등 반도체용 배선재료에 널리 사용되고 있다. 최근에는 납의 유해성 때문에 대부분의 전자제품은 무연솔더를 이용하여 제조되고 있지만, 주석을 이용한 반도체 소자가 고밀도화, 고 용량화 및 미세피치(Fine Pitch)화 되고 있기 때문에, 반도체 칩의 근방에 배치된 주석으로부터 많은 알파 방사선이 방출되어 메모리 셀의 정보를 유실시키는 소프트 에러 (Soft Error)가 발생되는 위험이 많아지고 있다. 이로 인해, 반도체 소자 및 납땜 재료의 주 원료인 주석의 고순도화가 요구되고 있으며, 특히 알파 방사선의 방출이 낮은 로우알파솔더 (Low Alpha Solder)가 요구되고 있다. 이에 따라 본 연구는 4인치 실리콘 웨이퍼상에 직경 $60{\mu}m$, 깊이 $120{\mu}m$의 비아홀을 형성하고, 비아 홀 내에 기능 박막증착 및 전해도금을 이용하여 전도성 물질인 Cu를 충전한 후 직경 $80{\mu}m$의 로우알파 Sn-1.0Ag-0.5Cu 솔더를 접합 한 후, 접합부 신뢰성 평가를 수행을 위해 고속 전단시험을 실시하였다. 비아 홀 내 미세구조와 범프의 형상 및 전단시험 후 파괴모드의 분석은 FE-SEM (Field Emission Scanning Electron Microscope)을 이용하여 관찰하였다. 연구 결과 비아의 입구 막힘이나 보이드(Void)와 같은 결함 없이 Cu를 충전하였으며, 고속전단의 경우는 전단 속도가 증가할수록 취성파괴가 증가하는 경향을 보였다. 본 연구를 통하여 전해도금을 이용한 비아 홀 내 Cu의 고속 충전 및 로우알파 솔더 볼의 범프 형성이 가능하였으며, 이로 인한 전자제품의 소프트에러의 감소가 기대된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.10-18
• /
• 2018

The primary purposes of this study are to understand a fundamental aspect of current uniformity around a reinforcing bar (rebar) in cement mortar, and to develop an accurate monitoring method in a wet-dry cycling process with the alternative current (AC) impedance method. Three cement mortar specimens with two embedded rebars were prepared in the laboratory. As a main variable, the distance between two rebars was designed to be 10, 20 and 30 mm with the same thickness of 20 mm. To simulate the corrosion of rebars in concrete structures in a marine environment, three cement mortar specimens were exposed to 15 wet-drying cycles (24-hour-immersion in seawater and 48-hour-drying in a room temperature) in the laboratory. It was observed that the potential level shifted to a noble value during corrosion potential monitoring, which is attributed to acceleration of dissolved oxygen diffusion at the drying process. AC impedance was measured in a frequency range from 100 kHz to 1 mHz on a wet-drying process. A theoretical model was proposed to explain the interface condition between the rebars and cement mortar by using the equivalent circuit consisting of a solution resistance, a charge transfer resistance and a CPE (constant phase element). It was observed that the diffusion impedance appeared in a low frequency range as corrosion of rebars progresses. At the drying stage of the wet-drying cycles, the currents line for monitoring tended to be non-uniform at the interface of rebar/mortar, being phase shift, ${\theta}$, close to $-45^{\circ}$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2018

Welding preheating means that the surface of the base material to which the metal is welded before the main welding is heated to a constant temperature. It prevents the cracks of the adjacent influences such as reduction of material hardening degree by controlling the cooling rate, suppression of segregation of impurities, prevention of thermal deformation, and moisture removal. For this reason, it is a necessary operation for high quality welding. Induction heating is an efficient heating method that converts electric energy into heat energy by applying electromagnetic induction phenomenon. Compared with combustion heat generated by gas and liquid, it is clean, stable, and economical as well as rapid heating. It can be heated regardless of the shape, depth and material of the heating body by modifying the shape of the frequency and the coil with a simple structure. In this paper, we implemented a low frequency welding preheating system using induction heating technique and observed the temperature changes of coil resistance, inductance and automotive transmission parts according to the height of each transmission in winding coil for three kinds of automotive transmission parts. We confirmed that the change of current is a very important factor in the low frequency heating.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.38-43
• /
• 2010

The purpose of this study is to secure the basis for judgment on the cause of an accident by analyzing the melting characteristics of a blade type fuse used for vehicles due to overload. In order to increase the reliability of the test, it was conducted by connecting the electrical system with conditions similar to those of an actual vehicle to apply the load. Carbonization pattern experiment of fuse by outside flame applied Korean Standard (KS). The fuse melted by the overcurrent showed a smooth cross-section while the test terminals, clear plastic body, etc., burnt out by the external flame was badly deformed. When 185% of the rated current (27.8A) was applied to a cable of 15A rated current onto which an over-capacity fuse (20A) was installed, the fuse melting time was 217 seconds. In addition, when a load current of 28.8[A] (139%) was applied, the fuse's test terminal and terminal blade were not burnt out although foam was observed on some parts of the plastic body. When a load capacity of 28.2[A] (141%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melting time was approximately 10 seconds. When a load current of 35.8[A] (119%) was applied, the fuse's test terminal and terminal blade were not burnt out, although some parts of the plastic body was swelled. However, it was observed that the switch terminal melted if approximately six minutes lapsed under such conditions. When a load capacity of 39.4[A] (131%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melted in approximately 69 seconds, and the test terminal and terminal blade were not burnt.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.69-76
• /
• 1998

This study was investigated to determine the effect of additives and ionic strength on the functionality of extracted proteins in preblends in order to use less additive in restructured meat products. Preblends contained the combinations of sodium chloride (NaCl; 0, 4.5, 9.0%), sodium tripolyphosphate (STPP; 0, 2.5, 5.0%), and tetrasodium pyrophosphate (PP; 0, 2.44, 4.88%). The pH values increased linearly with increasing STPP and PP concentrations (p<0.01). In the equivalent ionic strengths, PP was more effective than STPP in increasing pH. Phosphate ions were more effective on total extractable protein (used 1 M NaCl buffer) than chloride ion at equivalent ionic strengths. Solubility was decreased by adding NaCl and increasing total extractable proteins. Meat sulfhydryl contents were high with increasing total extractable proteins. When protein extracts were heated at $65^{\circ}C$, 7 min, meat sulfhydryl contents decreased and surface hydrophobicity increased (p<0.01). However, all protein extracts showed no differences in SDS-PAGE pattern. In conclusion, PP is more effective than STPP in order to use less additive but there was no linear relationship between functionnal improvement and ionic strength.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.47-55
• /
• 1995

New type yogurts were prepared by fermenting whole milk containing soy milk and/or brown rice with single or mixed culture of 4 types of lactic acid bacteria(Lactobacillus acidophilus, Lactobacillus bulgaricus, Leuconostoc mesenteroides, Streptococcus thermophilus). The curd yogurts were evaluated by acid production (pH, titratable acidity), number of viable cell, keeping quality and sensory property. Addition of soy milk and brown rice markedly stimulated the acid production and propagation of lactic acid bacteria, and slightly increased the Brix degree. Among the organisms tested, the mixed culture of Leuconostoc mesenteroides and Streptococcus thermophilus produced the highest amount of acid, and that of Leuconostoc mesenteroides and lactobacillus acidophilus showed the highest number of viable cell counts. When curd yogurt added with soy milk and brown rice was kept at $3^{\circ}C$ for 15 days, its keeping quality was relatively good. The sensory evaluation showed that the curd yogurt containing soy milk and brown rice slightly reduced the texture property and overall acceptability comparing with milk yogurt.