• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.1
• /
• pp.45-50
• /
• 2007

In this paper, this paper discusses how to improve the power control system of cold and hot water purifiers, in particular, system protecting device against abnormal voltage. The existing power supply control system came with a protecting device composed of varistor device only for impulse-type surges. Even though the existing system senses surge other than impulse-type, the system can not be protected. Accordingly, a new type of power control system was designed to protect the system from surge and ultimately prevent electricity accidents. The power control system suggested in this paper will be designed to protect the system by sensing input voltage and discontinuing power supply by means of SSR if voltage exceeding set value is sensed. To test the designed system, surge was imposed on the existing system and processes of system failure were experimented before safety of the designed power control system was simulated via P-spice program developed by Orcad in order to examine safety and reliability of the system.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2021

The type approval system for railway vehicle has been in effect since 2016 in order to establish a regular safety management system to secure railway safety and enhance the technological competitiveness of the railway industry, abolished the conventional performance test system through the reform of the Railroad Safety Act in 2012. Until now, there has been appreciated it has been making significant contributions to railway safety and industry of operation and manufacturing companies, taking their place in accordance with the implementation of the system. But there has been no case of quantitative analysis on the effectiveness of the actual system. In this study, in order to examine the full-scale performance of the approval system and quantitatively analyze effectiveness, we identified and defined the relationships with the major elements of the type approval system based on system thinking principle and determined the calculated outcomes to relevant stakeholders. A method of establishing a type approval performance management system that can be grasped, utilized, and adjusted from a point of various stakeholders' views was proposed. This is expected to be more helpful in the implementation of the system, such as improving and applying quantitative effects to analysis by closely reviewing the effects and influencing factors of the type approval system based on the data accumulated through continuous performance management and reflecting to system improvement.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.11 no.4
• /
• pp.6-18
• /
• 1982

The performance of two typical types of solar hot water heating system was tested in Seoul. Types of systems studied are single-tank internal external heat exchanger system and single-tank internal heat exchanger system. Comparing to experimental results, a transient system simulation program was made to analyze the performance of the selected system. The climate data, Standard Weather Year for Seoul, required for the simulation was provided. Computer simulations were used to estimate the effect of significant parameters upon system performance. The followings are obtained. 1. In the domestic solar water Heating system, the value $20-40kg/m^2\;h$ for flow rate through the collector is much better than the recommended value $72kg/m^2\;h$ in the solar heating system. 2. The effectiveness of collector heat exchanger and storage tank size are found to have only a small effect upon system performance. 3. The hot water draw pattern has a significant effect on system performance. A higher system efficiency achieved when draw-off occurred around noon than when it occurred around early morning. Using the above results, the reference solar hot water system which provides $300\ell$ of hot water per day, was selected as a guide for designer. And simplified graphical method was developed based on the modified f-chart method to determine required collector area. When the system design parameters of the proposed system differs from the reference system, required collector area can be calculated from area adjustment factors.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.261-264
• /
• 1997

A contactless eddy current type braking system is developed to take advantages of the recent brake system which uses hydraulic force can show high efficiency in a certain velocity region, but not in a high velocity region, and has initial response delay time and pressure build-up time which make stopping distance longer. These are the limits of mechanical brake system of a contact type, which makes a concept brake system required. So, in this paper, the contactless brake system .of a inductive current type is chosen instead of hydraulic brake system. This brake system can be used almost forever for being no wear and contributed to lightening weight of a vehicle. Besides, the contactless brake system can be used as that of electric or solar car with anti-lock brake system. The analysis of induced electromotive force and braking torque obtained with theoretical approximate model, the design of a braking system and a nonlinear controller, and the results of simulation of the ABS, experiment are included.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.675-683
• /
• 2018

In this paper, we have proposed a design and verification methods of electrical system and power loads for unmaned aeriel vehicles(UAVs) through electrical load analysis. In order to meet a UAV system requirement and electrical system specifications, we have designed an electrical power system for efficient power supply and distribution and have theoretically analyzed the power loads according to the power consumption and power bus design of UAV. Using electrical system rig, the designed electrical power system has been experimentally verified. Also, we have performed several flight tests to verify the UAV electrical system and power loads. It is concluded that the proposed design and verification method of electrical system for UAV system.

• Convergence Security Journal
• /
• v.6 no.1
• /
• pp.75-82
• /
• 2006

This paper proposes CPR(Computer-based patient record) system that is utilized in Ubiquitous environment, establish security policy by analyzing security limitation of system and design suitable security system in CPR system. The present study designed a CPR system and, for the development of a security system, established security policies for the CPR system through analyzing the operating environment and vulnerability in security and designed a security system implementing the policies. The security system supporting CPR system is composed of authentication system, XML documentation and encryption of medical information and network security system.

• Journal of Power System Engineering
• /
• v.4 no.2
• /
• pp.65-70
• /
• 2000

The shimmy phenomenon, or the radial vibration of steering wheel, happens frequently at a high speed, complicated with suspension system, steering system, vehicle body, engine, transmission and tire. In this study, the suspension system and steering system are modeled by the reference of vehicle body design coordinates(T.L.H), the coordinate system usually used by passenger car maker. In addition, the theoretical results from numerical method have been investigated and compared with the experimental ones by the correlating analysis between the tire and sub-system. The steering and suspension system modeled for the numerical analysis are both independent type. This study developed an analysis program which could forecast the shimmy level in advance by the variation of properties in each system and the change in design of new model.

• Korean Management Science Review
• /
• v.20 no.1
• /
• pp.1-23
• /
• 2003

Knowledge Management System is defined as an Information system to support the integrated knowledge management process for maximizing value of the knowledge assets in organizations. From that point of view, the system performance - the usage level of the system and user satisfaction - can be an available measure of the knowledge management system success. Many previous research were focused on the application of a new technological component for knowledge management processes or the construction of the overall system architecture in spite of the importance of the system performance. The purpose of this study is to Identify the factors affecting the knowledge management system performance. To do this, we conducted an exploratory case studies of eight companies. We applied theories of information system success to knowledge management system and investigated some specific strategic components as additional affecting factors. Finally, we proposed research model and ex propositions regarding the factors affecting the knowledge management system performance. The implication of the findings and future research directions were discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1146-1149
• /
• 1995

The CAD/CAM System for deep drawing transfer die in mechanical press proess has been developed. The developed CAD system can generate the drawing of drawing of transfer die in mechanical press. Using these results from CAD system, it can generate the NC data to machine die's elements on the CAD system. This system can reduce design man-hours and human errors. In order to construct the system, it is used to automate the design process using knowledge base system. The developed system is based on the knowledge base system which is involved a lot of expert's technology in the practice filed. Using AutoLISP language under the AutoCAD system, CTK customer language of SmartCAM is used as the overall CAD/CAM environment. Results of this system will be provide effective aids to the designer and mannufacturer in this field.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1770-1774
• /
• 2007

In this paper we deal with a design of the evaluation system to assess the vehicle operational control algorithm for Personal Rapid Transit(PRT) system. PRT system is different from the conventional rail traffic system in such that the station is off-line so as to guarantee a very short headway. In this study we propose an evaluation system to assess the performance of the proposed vehicle control algorithm. The evaluation system is composed of virtual vehicles, central control system, virtual wayside facilities, monitoring equipments. The virtual vehicles are made up by the laptop computers and the central control system employs Power PC process of Motorola Inc. The wayside facilities are implemented by employing the PXI module of the National Instruments Corporation. In order to test the proposed evaluation system a test algorithm is used, which has been simulated in the combined simulation system between Labview Simulation Interface Toolkit and Matlab/Simulink.