• 제목/요약/키워드: * $_f$-Max(D)

검색결과 163건 처리시간 0.022초

COMPACTNESS OF A SUBSPACE OF THE ZARISKI TOPOLOGY ON SPEC(D)

  • Chang, Gyu-Whan
    • 호남수학학술지
    • /
    • 제33권3호
    • /
    • pp.419-424
    • /
    • 2011
  • Let D be an integral domain, Spec(D) the set of prime ideals of D, and X a subspace of the Zariski topology on Spec(D). We show that X is compact if and only if given any ideal I of D with $I{\nsubseteq}P$ for all $P{\in}X$, there exists a finitely generated idea $J{\subseteq}I$ such that $J{\nsubseteq}P$ for all $P{\in}X$. We also prove that if D = ${\cap}_{P{\in}X}D_P$ and if * is the star-operation on D induced by X, then X is compact if and only if * $_f$-Max(D) ${\subseteq}$X. As a corollary, we have that t-Max(D) is compact and that ${\mathcal{P}}$(D) = {P${\in}$ Spec(D)$|$P is minimal over (a : b) for some a, b${\in}$D} is compact if and only if t-Max(D) ${\subseteq}\;{\mathcal{P}}$(D).

이차 발전비용함수를 사용한 경제급전문제의 균형-교환 최적화 (Balance-Swap Optimization of Economic Load Dispatch Problem using Quadratic Fuel Cost Function)

  • 이상운
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권4호
    • /
    • pp.243-250
    • /
    • 2014
  • 본 논문은 이차 발전비용 함수를 적용하는 경제급전의 최적화 문제에 대한 균형-교환 최적화 알고리즘을 제안하였다. 제안된 알고리즘은 초기치 $P_i{\leftarrow}P_i^{max}$, (${\Sigma}P_i^{max}$ > $P_d$)에 대해 ${\Sigma}P_i=P_d$일 때까지 $_{max}\{F(P_i)-F(P_i-{\alpha})\}$, ${\alpha}=_{min}(P_i-P_i^{min})$인 발전기 i의 출력량을 $P_i{\leftarrow}P_i-{\alpha}$로 균형과정을 수행하고, 교환과정은 $_{max}\{F(P_i)-F(P_i-{\beta})\}$ > $_{min}\{F(P_i+{{\beta})-F(P_j)\}$, $i{\neq}j$, ${\beta}$ = 1.0, 0.1, 0.1, 0.01, 0.001에 대해 $P_i{\leftarrow}P_i-{\beta}$, $P_j{\leftarrow}P_j+{\beta}$로 수행하였다. 제안된 방법을 15, 20과 38-발전기 사례에 적용한 결과 간단하면서도 항상 동일한 결과로 가장 좋은 결과를 나타내었다. 또한, 73-발전기를 통합하여 경제급전을 수행한 결과 독립적으로 운영하는 경우에 비해 발전비용을 현저히 절약할 수 있음을 보였다.

Flow Shop에서 준비시간이 작업순서에 종속적인 경우의 휴리스틱 알고리듬의 개발 (A Heuristic Algorithm for $n/m/D/F/F_{max}$)

  • 최성운
    • 산업경영시스템학회지
    • /
    • 제8권11호
    • /
    • pp.79-83
    • /
    • 1985
  • This paper is to develop four heuristic algorithms for $n/m/D/F/F_{max}$. A study present numerical example for (H1) algorithm. Among the sequence generated, the best sequence is J2, J1, J6, J7, J4, J3, J5 and makespan is 528. The optimal makespan of this numerical example can be found as 528 as also, and the worst value of heuristic solution is only 7.2 % away from it.

  • PDF

밸브지점 균형과 교환 최적화 방법을 적용한 동적경제급전문제 (Dynamic Economic Load Dispatch Problem Applying Valve-Point Balance and Swap Optimization Method)

  • 이상운
    • 한국인터넷방송통신학회논문지
    • /
    • 제16권1호
    • /
    • pp.253-262
    • /
    • 2016
  • 본 논문은 경제급전 최적화 문제에 균형-교환 방법을 제안하였다. 제안된 알고리즘은 모든 발전기를 가능한한 밸브지점으로 운영한다고 가정한다. 초기치로 최대 발전량 $P_i{\leftarrow}P_i^{max}$로 설정하고, 각 발전기의 밸브지점 $v_k$까지 발전량을 감소시켰을 때의 평균 발전단가 $c_i=\frac{F(P_i)-F(P_{iv_k})}{(P_i-P_{iv_k})}$가 최대가 되는 $_{max}c_i$ 발전기 i의 발전량을 밸브지점 발전단가 $P_{iv_k}$로 감소시켰으며, ${\Sigma}P_i-P_d$ > 0이면 $c_i=F(P_i)-F(p_i-1)$$_{max}c_i$ 발전기 발전량을 $P_i{\leftarrow}P_i-1$로 감소시켜 ${\Sigma}P_i=P_d$의 균형을 맞추었다. 다음으로, $_{min}\{_{max}(P_i-P_i^{min}),\;_{max}(P_i^{max}-P_i)\}$>${\alpha}{\geq}10$의 범위에 대해 "-10" 간격으로 감소시키는 성인걸음법으로, 10>${\alpha}{\geq}1$ 범위에 대해서는 "-1"의 아기걸음법으로, $P_i=P_i{\pm}{\alpha}$에 대한 $_{max}[F(P_i)-F(P_i-{\alpha})]$>$_{min}[F(P_j+{\alpha})-F(P_j)]$, $i{\neq}j$이면 $P_i=P_i-{\alpha}$, $P_j=P_j+{\alpha}$로 발전량을 교환하는 방법으로 최적화를 수행하였다. 다음으로 ${\alpha}=\text{0.1, 0.01, 0.001, 0.0001$에 대해 미세한 교환을 수행하였다. 동적 경제급전 문제의 시험 사례에 제안된 알고리즘을 적용한 결과 기존의 휴리스틱 알고리즘 최적화 발전비용을 크게 감소시켜 경제적인 이익을 극대화 시켰다.

비평활 발전비용함수를 가진 동적 경제급전문제의 교환 최적화 (A Swap Optimization for Dynamic Economic Dispatch Problem with Non-smooth Function)

  • 이상운
    • 한국컴퓨터정보학회논문지
    • /
    • 제17권11호
    • /
    • pp.189-196
    • /
    • 2012
  • 본 논문은 동적 경제급전의 최적화 문제를 풀기 위해 교환 알고리즘을 제안하였다. 제안된 알고리즘은 첫 번째로, 발전단가 $C_i^{max}/P_i^{max}$가 비싼 발전기는 가동을 중지시키는 개념을 도입하여 총 요구량 $P_d$와 총 발전량 ${\Sigma}P_i$의 균형을 맞추었다. 다음으로 발전량을 $P_i=P_i{\pm}{\Delta}$, (${\Delta}$=1.0, 0.1, 0.01, 0.001)에 대해 $_{max}[F(P_i)-F(P_i-{\Delta})]$ > $_{min}[F(P_j+{\Delta})-F(P_j)]$, $i{\neq}j$이면 $P_i=P_i-{\Delta}$, $P_j=P_j+{\Delta}$로 발전량을 교환하는 방법을 적용하였다. 동적 경제급전 문제의 시험사례에 제안된 알고리즘을 적용한 결과 기존의 휴리스틱 알고리즘 최적화 발전비용을 크기 감소시켜 경제적인 이익을 극대화 시켰다.

서울시(市) 미취학아동(未就學兒童)의 dmf 및 치아우식(齒牙齲蝕) 호발부위(好發部位)에 대(對)한 연구(硏究) (A STUDY ON dmf & PREDILECTION SITES OF PRESCHOOL CHILDREN IN SEOUL.)

  • 고성희
    • 대한소아치과학회지
    • /
    • 제8권1호
    • /
    • pp.103-117
    • /
    • 1981
  • The data about dental caries obtained from 1438 preschool children (male 797, female 641) in Seoul aged from 3 to 6 were analyzed by their sexes, ages, jaws and teeth surfaces. The results were as follows. 1. dmf rate : 92.63% 2. dmft index : 6.06 dmft rate 30.81 % dmfs index : 11.82 dmfs rate 12.02 % 3. d,m & f rate d rate: 79.45% m rate: 8.15% f rate : 12.40 % 4. dft index : 5.94 5. The order of caries susceptible tooth 1. Lower deciduous 2nd molar 2. Lower deciduous 1st molar 3. Upper deciduous 2nd molar 4. Upper deciduous lateral incisor 5. Upper deciduous cental incisor 6. Upper deciduous lateral incisor 7. Lower deciduous canine 8. Upper deciduous canine 9. Lower deciduous central incisor 10. Lower deciduous lateral incisor 6. Predilection sites of each tooth A) Deciduous central incisor ; Max. : Mesial cavity Mand. : Mesio-distal cavity B) Decidous lateral incisor ; Max. : Mesial cavity Mand. : Distal cavity=Mesial cavity C) Deciduous canine; Max. : Labial cavity Mand. : Distal cavity D) Decidous 1st molar ; Max. : Disto-occlusal cavity Mand.: Disto-occlusal cavity E) Deciduous 2nd molar ; Max. : Linguo-occlusal cavity Mand.: Occlusal cavity 7. All the values in caries criteria in 1981 were somewhat lower than in 1968, but m & f rate were increased.

  • PDF

PET/CT 검사에서 영상의 질을 유지하기 위한 적정한 $^{18}F$-FDG 투여량의 평가 (Evaluation of Reasonable $^{18}F$-FDG Injected Dose for Maintaining the Image Quality in 3D WB PET/CT)

  • 문아름;이혁;곽인석;최성욱;석재동
    • 핵의학기술
    • /
    • 제15권2호
    • /
    • pp.36-40
    • /
    • 2011
  • PET/CT 검사에서 환자에게 주입되는 $^{18}F$-FDG 투여량은 장비업체에서 제시하는 권고치와 각 병원에서 적용하는 기준치가 서로 다르다. 기준치의 차이로 인한 부적절한 $^{18}F$-FDG 투여량은 환자의 피폭선량을 증가시키고 영상의 질을 감소시킬 수 있다. 본 실험에서는 PET/CT 검사에서 영상의 질을 유지하면서 환자의 피폭선량을 감소시킬 수 있는 적정한 $^{18}F$-FDG 투여량에 대한 평가를 하고자 한다. 모형 실험은 NEMA NU2-1994를 이용하여 열소와 배후 방사능비를 4:1로 유지한 상태에서 열소의 방사능 농도를 1, 3, 5, 7, 9 MBq/kg으로 증가시키며 $^{18}F$-FDG를 주입하였다. CT를 이용한 투과촬영 후 2분 30초/bed의 방출영상을 3차원 (3D) 모드로 획득하였다. 열소와 배후방사능 부위에 각각 관심영역을 설정하고 최대 표준섭취계수(Standard Uptake Value maximum, $SUV_{max}$)를 얻은 후 해당 위치에서의 신호대 잡음비(Signal to Noise Ratio, SNR)를 비교 분석하였다. 임상실험은 2009년 11월부터 2010년 8월까지 내원한 환자를 대상으로 PET/CT 검사를 시행한 환자영상에서 간병변이 없는 97명의 환자를 선별하여 간(liver)과 대퇴부(thigh) 영역에 관심영역을 설정하고 $SUV_{max}$를 측정하여 투여량에 따른 영상의 차이를 비교 분석하였다. 모형 실험에서 단위 질량 당 주입된 방사능 농도는 1, 3, 5, 7, 9 MBq/kg으로 $SUV_{max}$는 23.1, 24.1, 24.3, 22.8, 23.6, SNR은 0.48, 0.54, 0.56, 0.55, 0.55로 나타났다. 5 MBq/kg 이하의 방사능 농도에서는 투여량의 증가에 따라 $SUV_{max}$와 SNR이 증가하지만 7 MBq/kg 이상에서는 감소하였다. 임상 실험의 경우는 단위 질량 당 주입된 방사능 농도가 4.72, 5.34, 6.16, 7.41, 8.68 MBq/kg으로 증가할수록 $SUV_{max}$는 2.68, 2.67, 2.26, 1.88, 1.95, SNR이 0.52, 0.53, 0.46, 0.46, 0.44로 5 MBq/kg의 투여량을 초과할 경우 모형 실험에서와 같은 감소양상을 보였다. 환자의 체중을 고려한 $^{18}F$-FDG 투여량의 증가는 일정 범위 내에서 영상의 질을 향상시키지만 그 범위를 초과할 경우 우발동시계수 및 산란계수의 증가로 인하여 오히려 영상의 질이 저하된다. 실험 결과로부터 3D PET/CT 검사 시 단위질량 당 주입된 방사능 농도 5 MBq/kg이 최적의 주입선량이라는 것을 알 수 있다.

  • PDF

세파클러 375 mg서방정의 생물학적 동등성 (Bioequivalence of Cefaclor 375 mg SR Tablet)

  • 이신화;윤민혁;최경업;권광일
    • 한국임상약학회지
    • /
    • 제13권1호
    • /
    • pp.13-17
    • /
    • 2003
  • This study was carried out to compare the bioavailability of $Ceclex^{(R)}$ SR TAB (test drug, cefaclor 375 mg/Tablet) with that of Ceclor $MR^{(R)}$ SR IAB (reference drug) and to estimate the pharmacokinetic parameters of cefaclor in healthy Korean volunteers. The bioavailability was examined on 24 healthy volunteers who received a single dose (375 mg) of each drug in the fasting state in a randomized balanced 2-way crossover design. After dosing, blood samples were collected for a period of 7 hours. Plasma concentrations of cefaclor were determined using HPLC with UV detection. The pharmacokinetic parameters $(AUC_{0-7h},\;C_{max},\;T_{max},\;AUC_{inf},\;K_e,\;t_{1/2},\;V_d/F,\;and\;CL/F)$ were calculated with non-compartmental pharmacokinetic analysis. The ANOVA test was utilized for the statistical analysis of the $T_{max}$, log-transformed $AUC_{0-7h$}$, log-transformed $C_{max},\;t_{1/2},\;V_d/F$, and $CL/F$. The ratios of geometric means of $AUC_{0-7h}\;and\;C_{max}$ between test drug End reference drug were $95.67\%\;(8.55\;vs\;8.18{\mu}g{\cdot}hr/ml)\;and\;103.86\%\;(2.85\;vs\;2.96{\mu}g/ml)$, respectively. The $T_{max}$ of test drug and reference drug was $2.56\pm0.15\;and\;2.23\pm0.13\;hrs,\;respectively.\;The\;90\%$ confidence intervals of mean difference of logarithmic transformed $AUC_{0-7h}\;and\;C_{max}$ were log0.90-log1.04 and log0.91-log1.13, respectively. It shows that the bioavailability of test drug is equivalent with that of reference drug.

  • PDF

지진동모델 파라미터 동시역산을 이용한 지진관측소 분류 (Classification of Seismic Stations Based on the Simultaneous Inversion Result of the Ground-motion Model Parameters)

  • 연관희;서정희
    • 지구물리와물리탐사
    • /
    • 제10권3호
    • /
    • pp.183-190
    • /
    • 2007
  • 지진기록의 수평성분 S파 푸리에스펙트럼을 이용한 추계학적 지진동모델(stochastic point-source ground-motion model; Boore, 2003) 파라미터 역산결과를 기반으로 지진공학적으로 활용될 수 있는 지진관측소 분류를 시도하였다. 추계학적 지진동모델에서 부지효과는 고주파감쇠상수인 $K_0$ (Anderson and Hough, 1984)와 지층의 탄성임피던스의 차이에 의해 발생하는 부지증폭함수(A(f))의 조합으로 표현된다. 본 연구에서는 A(f)를 지진파 스펙트럼의 수평/수직성분비(H/V)와, 이를 초기값으로 하여 얻어진 역산결과에 의한 관측소별 로그오차평균을 합산하여 계산하였다. 지진관측소는 $1{\sim}10$ Hz 범위의 부지증폭함수의 상용로그 최대값($logA_{1-10}^{max}$(f))에 의해 다섯 등급(A: $logA_{1-10}^{max}$(f) < 0.2, B: 0.2 $\leq$ $logA_{1-10}^{max}$(f) < 0.4, C: 0.4 $\leq$ $logA_{1-10}^{max}$(f) < 0.6, D: 0.6 $\leq$ log < 0.8, E: 0.8 $\leq$ $logA_{1-10}^{max}$(f))으로 분류하였다. 분류된 진관측소의 평균적인 부지증폭함수는 A에서 E 등급으로 변함에 따라 지반의 고유진동수가 저주파로 이동하는 의미 있는 결과를 나타내었으며, 최근에 설치장소를 이전한 기상청 일부 관측소에 대해 이설 전후의 등급변화 및 최근 발생한 중규모 지진관측자료와 지진동 거리감쇠식과의 비교분석을 통해 관측소 분류결과의 타당성을 입증할 수 있었다.

게이트 리세스 식각 방법에 따른 PHEMT 특성 변화 (Analysis of characteristics of PHEMT's with gate recess etching method)

  • 이한신;임병옥;김성찬;신동훈;전영훈;이진구
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
    • /
    • pp.249-252
    • /
    • 2002
  • we have studied the characteristics of PHEMT's with gate recess etching method. The DC characterization of PHTMT fabricated with the wide single recess methods is a maximum drain current density of 319.4 ㎃/mm and a peak transconductance of 336.7 ㎳/mm. The RF measurements were obtained in the frequency range of 1~50GHz. At 50GHz, 3.69dB of 521 gain were obtained and a current gain cut-off frequency(f$_{T}$) of 113 CH and a maximum frequency of oscillation(f$_{max}$) of 172 Ghz were achieved from this device. On the other hand, a maximum drain current of 367 mA/mm, a peak transconduclancc of 504.6 mS/mm, S$_{21}$ gain of 2.94 dB, a current gain cut-off frequency(f$_{T}$) of 101 CH and a maximum frequency of oscillation(f$_{max}$) of 113 fa were achieved from the PHEMT's fabricated by the .narrow single recess methods.methods.

  • PDF