• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.307-310
• /
• 1998

In this paper, $Al_2$O$_3$/MgO belayer was prepared with Electron-beam evaporation and the properties of the film was investigated in order to improve the property of MgO film, which is used for the protection layer in PDP(Plasma Display Panel). $Al_2$O$_3$/MgO belayer were improved of roughness and it were condensed by annealing, and the result of XPS analysis for $Al_2$O$_3$/MgO belayer unchanged binding energy. To investigate electric characteristics, discharge properties of $Al_2$O$_3$/MgO belayer were compared with discharge minimum voltage for MgO monolayer through Ar discharge experiments.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1307-1308
• /
• 2008

본 연구에서는 이전에 제안한 stripe형으로 제작된 경사형 대향유지전극구조의 마진 개선과 오방전 감소를 위하여 폐쇄형으로 제작된 경사형 대향유지전극구조를 제안하였다. 제안된 구조는 상판의 유지전극들을 페쇄형으로 패터닝된 유전체층 사이에 Ag 전극을 경사형으로 형성하여 만든 구조이다. 테스트 패널은 250${\mu}m$ 유지전극 간격들을 가지는 제안된 구조와 기존의 유지전극 간격 60${\mu}m$의 ITO 구조를 reference로 하여 제작하였다. 폐쇄형 구조를 reference를 기준으로 이전의 stripe형과 비교했을때 전류가 50${\sim}$64% 증가하여 효율이 18% 감소하였지만 마진이 25V 증가하였고 휘도가 최대 44% 증가하였다. 패쇄형 구조가 stripe형 구조에 비해 효율이 감소하였지만 기존의 면방전형 구조에 비해 최대 146%의 효율 증가를 보였으며 동일전압에서 stripe 구조에 비해 높은 휘도와 넓어진 마진을 가졌다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.5
• /
• pp.239-244
• /
• 2006

To drive the high-image quality plasma displays of XGA and/or full-HD, we must effectively improve the driving waveform, which get the reset period for the stabilized control of wall charges, the address period to select discharge or non-discharge, and sustain period for luminance in 1 TV-frame, and also the display quality. To accomplish them, the development of the technology for the fast address discharge is required. In this paper, the correlation between the sustain-electrode gap and address discharge characteristics for the high-speed addressing was analyzed using the measurements of dynamic voltage margins. Results showed that the narrower the gap between the sustain electrodes, the narrower the with of the scan pulse became and a dynamic margin of data voltage of 29.2 V was obtained at scan pulse width of $1.0{\mu}s\;and\;V_{ramp}$ of 240 V for driving 4-inch test penal, which the gap between sustain electrodes was $65{\mu}m$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.9
• /
• pp.436-442
• /
• 2002

Recently color AC PDP(plasma display panel) technology is rapidly improved. However, the luminous efficiency improvement is a key issue for making plasma display into a large-area flat display. In this paper, we suggest a new concentration of Xe in He-Ne-Xe gas mixture in order to achieve a high luminous efficiency of color AC PDPs. We calculated the densities of 25 species as a function of the time zero dimensional simulation using CVODE solver and we compared the results of zero dimensional simulation with a measurement of photo wave brightness and luminous efficiency, in order to find the optimum mixing condition of He-Ne-Xe gas in color plasma display panel. We obtained a high discharge speed under Xe mixing ratio of 1% by simulation and confirmed that through measuring photo wave.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.31-43
• /
• 2008

The functional dyes, which has various optical characteristics that can be applicable to field of electronic, photo electronic, such as sensor or electrode, were synthesized. Physical property and optical stability was studied with preparation of conductive type film as a kind of optical filter of plasma display panel, by adapting neon cut off dye, which can selectively absorbing between 580 and 610nm wavelength. The filter was prepared with PSA resin, which has functional group of - COOH and - OH, as binder. And the characters such as spectroscopy, heat-proof / wet-proof, thermal stability and commerciality, which must be held by functional dyes, were examined. Conductive type film is the kind of film includes only neon cut off dyes. For the neon cut off dyes, cyanine dyes can be applied. And it is observed that spectrum of before and after the durability test are not changed due to stability of dyes, as the result of coating on the mesh film with PSA binder.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.1-5
• /
• 2000

Recently alternating-current Plasma Display Panel(AC-PDP) is in the spotlight as a digital television and high definition television. The panel structure widely adapted in commercial AC-PDP is three electrodes surface discharge type. At present time, the luminous efficiency is around 1lm/W, it should be a key factor for the commercialization. For the high luminous efficiency, the development of panel structure is necessary. At a given panel structure, a driving method should be optimized to get a sufficient luminous efficiency. The display image of AC-PDP could be realized by the repeated light emission from the discharge. Because most of discharge power is consumed in the sustaining period, the optimization of sustaining waveform is very important for the high luminous efficiency. ADS (Address and Display period Separated) driving method is commonly used. The average driving frequency of ADS driving method is ranged by several tens kilo of [kHz], however the actual frequency of sustaining period is in range of 100[kHz] to 200[kHz]. Based on this study, when the phosphor emits the visible light, it has a decay time of few milliseconds due to the material transfer to the phosphor to emit the visible light. Consequently the luminous efficiency decreases in proportion to the driving frequency. It is found that the luminous efficiency could be significantly improved by the low frequency sustaining driving method.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.839-842
• /
• 2008

본 연구는 LCD 패널에서 시청모드별 사용자의 피로도 차이에 대한 연구이다 LCD 사용에 따른 사용자 피로도에 미치는 영향이 보고되고 있는 것을 감안하여 감성 공학적 방법을 이용하여 시청모드에 따른 사용자 피로도 차이를 분석하였다. 실험은 34명의 대학생을 두 그룹으로 나누어서 같은 동영상 조건에서 각각 영화모드와 표준모드를 60분간 시청하게 하였다. 시청 시의 피로도를 알아보기 위해 생리신호 반응(GSR, PPG, SKT), 눈 움직임(동공의 확대 축소속도, 눈 깜박임률) 및 주관적 피로도(긴장도, 쾌적도, 피로도)를 측정하였다. 그 결과 주관적인 평가와 생리 반응에서 영화모드가 표준모드보다 더 피로감을 유발시키는 것을 확인 할 수 있었다. 눈 움직임 반응에서는 통계적으로 유의한 결과를 얻지 못하였다.

• Journal of the Korea Furniture Society
• /
• v.19 no.1
• /
• pp.22-32
• /
• 2008

Revolution of software and hardware technology changed TV from cathode-ray tube to a LCD or PDP. And this change calls for change of TV decoration cabinet. The flat panel TV stands market is very a world-wide enormous size with the function which is various and breed and design is forming. Nonetheless, Our flat panel TV stands production method and technique is to a phase which imitates the product of the foreign nation which precedes. Currently our country TV / AV decoration cabinet is staying to only the acceptance function which is simple. Consequently, the development of the new flat panel TV stands that matches in the house culture which is modernized with applies the visual effect which is various, effective design and function is necessary. The fact that it develops the product which equips the function characteristic which is new and convenient is objective of sample planning.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1721-1723
• /
• 1997

In AC Plasma Display Panel(PDP), serious problems are low radiation brightness and very high discharge voltage. To solve these problems, it is necessary to obtain optimal frequency of drive waveform and optimal gas mixing ratio. This paper presents firing voltage and sustain voltage as frequency of waveform and gas mixing ratio, and proposes optimal frequency of drive waveform and optimal gas mixing ratio.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.198-201
• /
• 2006

To produce fine structure with uniform surface of barrier ribs in PDP, acid etching process has been used in manufacture process. It is necessary to understand the mechanism of etching, particularly on the interface of ceramic fillers and matrix glass. We investigated the effect of ceramic fillers (ZnO, $Al_{2}O_3$) on the microstructure of borate glass system to find an etching mechanism of barrier ribs. The harrier ribs was etched with a several steps, dissolving a small amount of residual glass, taking out alumina fillers, and removing a cluster type of ZnO fillers and glass matrix.