• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.327-330
• /
• 2008

본 논문은 도형 요구사항(Requirement Diagram)을 기반으로 MC/DC를 만족하는 테스트 케이스를 생성하는 방법을 기술한다. MC/DC는 테스트 케이스의 여러 커버리지 중 테스트 케이스의 질 측면과 효율성 측면에서 우수하다. 하지만 MC/DC는 구조적 커버리지(Structural Coverage)로써 이를 바로 도형 요구사항에 대해 적용시킬 수 없다. 그러므로 MC/DC를 기반으로 도형 요구사항에 적용하는 방법을 제시한다.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.488-495
• /
• 2009

Pork cutlet is a favorite deep fat fried food item among Korean children, and an excellent protein-containing food, and as well as a simple and economical cuisine. However, the frying process adds a significant amount of calories. We added MC (Methylcellulose) and HPMC (Hydroxypropyl Methylcellulose) to the batter in an effort to reduce oil uptake in prepared pork cutlets. After additions of MC and HPMC at concentrations of 0.5, 1, and 1.5% respectively, we assessed the viscosity of batter, color after frying, the increases in moisture retention and oil uptake, and sensory characteristics, comparing each quality. The viscosity of batter with 0.5% HPMC added (w/w) was similar to that of the controls, but the viscosity of all the batter with added MC was so much higher that it was difficult to use the batter for coating at the same temperature, leading to a failure even to prepare a sample. After frying, the batter with added HPMC provided significantly less oil uptake and more moisture retention than the batter to which MC was added. Additionally, with regard to color and sensory characteristics, the pork cutlet with 0.5% added HPMC was superior to the other samples. According to these results, we concluded that when cellulose derivatives are added in order to reduce oil uptake and to raise the moisture retention of the batter of pork cutlet, HPMC is more useful in this regard than MC. Additionally, the batter with 0.5% HPMC added appears to be the best of the tested choices, for three reasons: first, the viscosity of the batter is similar to that of the controls; second, the taste is not greasy after frying as the result of the reduced oil uptake and higher moisture retention; and third, the sensory characteristics of this sample, such as, color, crispiness, and hardness were the best among samples.

• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.25-30
• /
• 2006

• Journal of the Chungcheong Mathematical Society
• /
• v.14 no.1
• /
• pp.41-48
• /
• 2001

In this paper, we study the sap-Perron and ap-McShane integrals. In particular, we show that the sap-Perron integral is equivalent to the ap-McShane integral.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.73-80
• /
• 2003

In this paper, we propose a ETD-turbo code(Enhanced Time Diversity turbo code) which is a novel turbo code configuration to increase the time diversity effect and analyze the performance of ETD-turbo coded MC-CDMA system. The ETD-turbo code, which is added another interleaver to the conventional turbo code structure, is consisted. Time diversity effect of the ETD-turbo code is improved by every parity bits converted into interleaver pattern. In order to the performance of the ETD-turbo code, we conduct a computer simulation about interleaver type. And we make comparison between the performance of ETD-turbo coded MC-CDMA system and the conventional turbo coded MC-CDMA system. By the simulation results, ETD-turbo code has less BER than the conventional turbo code and time delay is decreased by reducing iteration numbers. Therefore, it is defined that the performance of ETD-turbo coded MC-CDMA system is improved than the conventional turbo coded MC-CDMA system.

• Environmental Mutagens and Carcinogens
• /
• v.24 no.1
• /
• pp.19-24
• /
• 2004

In order to understand the mechanism of the regulation of drug metabolizing enzyme gene expression, we have studied the induction of CYP1A1 and $GST\alpha,$ $\mu,$ $\pi$ enzymes in Japanese monkey and rhesus monkey after the treatment with 3-methylcholanthrene (3MC) and di-n-butyl phthalate (DBP) and bisphenol A (BPA). The levels of mRNA were measured by RT-PCR in brain, intestine and liver. In the case of adult monkey, treatment with 3MC induced CYP1A1 mRNA in intestine by 11-fold. The treatment with DBP induced CYP1A1 mRNA. Effects of 3MC and DBP on GST mRNA expression was not clear. But $GST\mu$ was slightly inhibited by the treatment with 3MC and DBP. $GST\alpha$ was induced in intestine by 1.5-fold. $GST\pi$ was slightly induced by the treatment with 3MC and DBP in intestine. In the case of fetus monkey, the basal levels of fetus CYP1A1 mRNA and GSTs mRNA were relatively low compared to adult monkey. As the age of monkey increased, the basal levels of CYP1A1 mRNA were also increased. 3MC induced the expression of CYP1A1 mRNA didn't significantly induce CYP1A1 mRNA in intestine. The levels of $GST\mu$ and $GST\pi$ were not changed by the treatment with 3MC and DBP. $GST\pi$ was slightly induced by the treatment with 3MC and DBP.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.56-56
• /
• 2003

For the treatment of superficial tumors like squamous cell carcinoma of the head and neck, 6 MV photon beam is not appropriate and a spoiler is widely used to increase dose in the buildup region, while preserving the skin sparing effect. However, commercially available treatment planning systems assume a normal unspoiled beam, thereby cannot predict the buildup dose with spoiler accurately. We aimed to implement a Monte Carlo (MC) based planning system to apply it to the radiation treatment of head and neck. Lucite with thickness of 10-mm was used for the beam spoiler with Siemens Primus 6 MV photon beam. BEAM/DOSXYZ MC system was employed to model the linac and the spoiler. To verify the calculation accuracy of MC simulations, the percent depth doses (PDDs) and profiles with and without spoiler were measured using a parallel-plate chamber. For the MC based planning, we adopted a hybrid interface system between Pinnacle (Philips, USA) and BEAM/DOSXYZ to support treatment parameters of Siemens linac and the spoiler. The measurements of PDDs and profiles agreed with the corresponding MC simulations within 2% (lSD), which demonstrate the reliability of our MC simulations. The spoiler generated electrons make a contribution to the absorbed dose up to depth of 2cm, which shows that the dominant source of increased dose from spoiler system is the contaminating electrons created by the spoiler. The whole procedures necessary for MC based treatment planning were performed seamlessly between Pinnacle and BEAM/DOSXYZ system. This ability helps to increase the clinical efficiency of the spoiler technique. In conclusion, we implemented a MC based treatment planning system for a 6 MV photon beam with a spoiler. We demonstrate sophisticated MC technique makes it possible to predict dose distributions around buildup region accurately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1355-1363
• /
• 2017

Recently, distributed compressed video sensing (DCVS) has been actively studied in order to achieve a low complexity video encoder by integrating both compressed sensing and distributed video coding characteristics. Conventionally, a motion compensated block compressed sensing with smoothed projected Landweber (MC-BCS-SPL) has been considered as an effective scheme of DCVS with all compressed sensing frames pursuing the simplest sampling. In this scheme, video frames are separately classified into key frames and WZ frames. However, when reconstructing WZ frame with conventional MC-BCS-SPL scheme at the decoder side, the visual qualities are poor for temporally active video sequences. In this paper, to overcome the drawbacks of the conventional scheme, an enhanced MC-BCS-SPL algorithm is proposed, which corrects the initial image with reference to the key frame using a high correlation between adjacent key frames. The proposed scheme is analyzed with respect to GOP (Group of Pictures) structuring method. Experimental results show that the proposed method performs better than conventional MC-BCS-SPL in rate-distortion.

• Advances in materials Research
• /
• v.4 no.3
• /
• pp.133-144
• /
• 2015

The aim of this investigation is to prepare geopolymer resin by alkali activation of ceramic waste (AACW) with different sodium hydroxide (NaOH) and liquid sodium silicate (LSS) concentrations. In order to prepare geopolymer cement, AACW was replaced by 10 and 30 % by weight (wt.,) of concrete waste (CoW) as well as 10 and 30 wt., % ground granulated blast-furnace slag (GGBFS). The results showed that, the compressive strength of AACW increases with the increase of activator content up to 15:15 wt., % NaOH: LSS. All AACW hardened specimens activated by 3:3 (MC6), 6:6 (MC12), 12:12 (MC24) and 15:15 wt., % (MC30) NaOH: LSS destroyed when cured in water for 24h. The MC18 mix showed higher resistivity to water curing. The results also showed that, the replacement of AACW containing 9:9 wt., % NaOH: LSS (MC18) by 10 (MCCo10) and 30 (MCCo30) wt., % CoWdecreased the compressive strength at all ages of curing. In contrast, the MCCo10 mix showed the lower chemically combined water content compared to MC18 mix. The MCCo30 mix showed the higher chemically combined water content compared to MC18 and MCCo10 mixes. The compressive strength and chemically combined water of all AACWmixes containing GGBFS (MCS10 and MCS30) were higher than those of AACWwith no GGBFS (MC18). As the amount of GGBFS content increases the chemically combined water increases. The x-ray diffraction (XRD) proved that as the amount of CoWcontent increases, the degree of crystallinity increases. Conversely, the replacement of AACW by GGBFS leads to increase the amorphiticity character. The infrared spectroscopy (FTIR) confirms the higher reactivity of GGBFS compared to CoW as a result of successive hydration products formation, enhancing the compaction of microstructure as observed in scanning electron microscopy (SEM).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.331-336
• /
• 2011

Purpose: McNamara and Delaire analyses are two commonly used analytic methods, yet, they differ in their theoretic concepts and different reference lines are used for ideal surgical prediction. Therefore, the use of different analytic methods may result in different surgical plans. The purpose of this study was to compare the anterior and posterior relationship of the maxilla and mandible by using McNamara and Delaire analysis. Methods: 30 Korean patients (15 male and 15 female) who had visited the Department of Oral and Maxillofacial Surgery, College of Dentistry, Yonsei University, for dentofacial evaluation were studied by using McNamara's and Delaire's analyses. Results: On the maxillary analysis, 26 out of 30 patients (86.7%) were in accordance. On the mandibular analysis, 20 out of 30 patients (66.7%) were in accordance. On the maxillary analysis, McNamara's analysis showed an average of 0.36 mm greater amount of prognathism compared to Delaire's analysis, and this was not statistically significant. On the mandibular analysis, McNamara's analysis showed an average of 6.03 mm greater amount of prognathism compared to Delaire's analysis, and this was statistically significant. On the mandibular analysis, 26 out of 30 patients (86.7%) showed a greater amount of prognathism on McNamara's analysis compared to that of Delaire's analysis. The remaining 4 patients (13.3%) showed the same amount of prognathism on both analyses. Conclusion: These results may serve as a reference for surgeons when determining which analytic method is to be used for optimal surgical results.