• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.326-331
• /
• 2001

In this study. CT specimens were prepared from ASME SA5l6 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -10$0^{\circ}C$ and -12$0^{\circ}C$ in the range of stress ratio of 0.1 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔKsub/th/ in the early stage of fatigue crack growth ( Region I) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da.dN -ΔK in RegionII, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.1 s.33
• /
• pp.44-54
• /
• 1990

The purpose of this study was to investigate the effects of thickness of the sleeping pad on the physiological responses and the microclimate in the heating ondol room during sleeping time. The measuring points were skin temp., weight loss and body movement as physiological responses and the compression ratio, the temp. on/under the sleeping pad, the inside limp. of the sleeping quilts and subjective sence while 7 hours sleeping. Thickness of sleeping pads was 27.2 mm(A), 34.8 mm (B), 47.9 mm(C) used for 90 days and no used pad 60.7 mm(D). The floor surface temp. was keeping $29{\pm}1^{\circ}C$ while the environmental conditions was at $23{\pm}1^{\circ}C$ ($50{\pm}5\%$ R.H.) The results were as followings; 1) The mean compression ratio after using the sleeping pads for 45 days was about $70\%$ , and it wasn't increased any more thereafter 2) After 2 hours sleeping the temp. under the sleeping pads was shown that C and D were higher than A and B, and the temp. on the sleeping pads was shown that A and C pads were higher than B and D. But after 3-4 hours sleeping the skin temp. of legs was shown that B and D pads were higher than A and C. 3) Weight loss for C pad was significantly higher than others. Body movement and side position in tying was higher in A and C pads than B and D. 4) The inside temp. of quilt for A and C pads were higher in the early part of sleeping period than those of B and C pads and relative humidity was lower in C than others. 5) D pad was softer than others and fatigue degree was turned out to be lowest in D, the highest in A. From this point of view, we concluded that thickness of the sleeping Pad in the heating ondol room had different characteristic from that in no heating ondol room. And 35 mm used pad was turned out to be proper.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.967-972
• /
• 2017

Objective: Two experiments were conducted to determine the effects of forage-to-concentrate (F:C) ratio on the nutrient digestibility and enteric methane ($CH_4$) emission in growing goats and Sika deer. Methods: Three male growing goats (body weight $[BW]=19.0{\pm}0.7kg$) and three male growing deer ($BW=19.3{\pm}1.2kg$) were respectively allotted to a $3{\times}3$ Latin square design with an adaptation period of 7 d and a data collection period of 3 d. Respiration-metabolism chambers were used for measuring the enteric $CH_4$ emission. Treatments of low (25:75), moderate (50:50), and high (73:27) F:C ratios were given to both goats and Sika deer. Results: Dry matter (DM) and organic matter (OM) digestibility decreased linearly with increasing F:C ratio in both goats and Sika deer. In both goats and Sika deer, the $CH_4$ emissions expressed as g/d, g/kg $BW^{0.75}$, % of gross energy intake, g/kg DM intake (DMI), and g/kg OM intake (OMI) decreased linearly as the F:C ratio increased, however, the $CH_4$ emissions expressed as g/kg digested DMI and OMI were not affected by the F:C ratio. Eight equations were derived for predicting the enteric $CH_4$ emission from goats and Sika deer. For goat, equation 1 was found to be of the highest accuracy: $CH_4(g/d)=3.36+4.71{\times}DMI(kg/d)-0.0036{\times}neutral$ detergent fiber concentrate (NDFC,g/kg)+$0.01563{\times}dry$ matter digestibility (DMD,g/kg)-$0.0108{\times}neutral$ detergent fiber digestibility (NDFD, g/kg). For Sika deer, equation 5 was found to be of the highest accuracy: $CH_4(g/d)=66.3+27.7{\times}DMI(kg/d)-5.91{\times}NDFC(g/kg)-7.11{\times}DMD(g/kg)+0.0809{\times}NDFD(g/kg)$. Conclusion: Digested nutrient intake could be considered when determining the $CH_4$ generation factor in goats and Sika deer. Finally, the enteric $CH_4$ prediction model for goats and Sika deer were estimated.

• 한국해양학회지
• /
• v.29 no.3
• /
• pp.258-268
• /
• 1994

Nitrogenous new production and regenerated production were measured in the southern part of the Yellow Sea (Hwanghae) using a stable isotope /SUP 15/N nitrate and ammonia between April 25∼30, 1993. Nitrogen production varied between 155 and 688 mg N m/SUP -2/ d/SUP -1/, which belongs to meso to eutrophic area values. This is equivalent to 881∼3909 mg C m/SUP -2/ d/SUP -1/, assuming the Redfield ratio for C:N of 5.7:1 (by weight). the f0ratio which is the fraction of new production from primary production, varied between 0.12 and 0.26, indicating that 74 to 88% of primary production was supported by the regeneration of nutrients within the euphoric zone. This low f0ratio is the characteristics of the oligo- to mesotrophic area. Contrary to the expected, the ambient nutrient concentration was not an important factor for controlling productivity in this area during the study period. The difference in productivity among stations was mainly due to the variations in phytoplankton biomass in different water masses.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.793-796
• /
• 2005

A structure and a design of device were developed to fabricate large-scale active matrix organic light-emitting diode (AMOLED) display with good color purity and high aperture ratio. With these technologies, we developed a full color 14.1 inch WXGA AMOLED display. For the integration of OLED on an active matrix a-Si TFT backplane, an efficient top emission OLED is essential since the TFT circuitry covers a large position of the pixel aperture. These technologies will enable up the OLED applications to larger size displays such as desktop monitors and TVs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1564-1568
• /
• 2005

The objective of the study was to evaluate the use of n-alkanes to estimate DM intake and digestibility by beef cattle. Six steers were blocked (3 blocks, 2 animals/block) according to the body weight (279${\pm}$19 kg) and randomly allotted within blocks to two diets (3 steers/diet). A second trial was conducted with the same animals (321${\pm}$18 kg) after 36 days (d), using a switch back design. The diets consisted of two types of chopped sun-cured hay, alfalfa (Medicago sativa L) hay, or fescue (Festuca arundinacea Schreb) and alfalfa mixture, which were fed in equal amounts to steers. Animals were dosed with $C_{32}$ and $C_{36}$ alkanes, employing an intra-ruminal controlled-release device at the beginning of each trial. Hay intake per animal was measured from d 6 to 12 and sub samples were taken for chemical analysis. Rectal samples of feces were taken from each animal once/daily from d 8 to 14, freeze dried, and ground prior to alkane analysis. Alkanes were extracted from ground hay and feces. Feed intake was calculated from the dose rate of $C_{32}$ alkane and, the herbage and fecal concentrations of adjacent odd ($C_{33}$ or $C_{31}$) and even ($C_{32}$) chain length alkanes. Crude Protein, NDF, ADF, ash concentrations and In vitro dry matter digestibility (IVDMD) were 17.7, 42.2, 28.4, 7.9 and 71.7 for alfalfa, and 12.4, 56.5, 30.4, 6.9 and 69.1% for fescue/alfalfa mixture, respectively. For both diets, intake estimated from $C_{33}$:$C_{32}$ ratio was not different from the measured intake, but intake estimated from $C_{31}$:$C_{32}$ ratio was lower (p<0.05), than the measured intake for both diets. The average estimated forage intake from $C_{33}$:$C_{32}$ ratio was 4.86 and 0.69% below than the measured intake for alfalfa and, fescue/alfalfa mixed diets, respectively. The respective estimates with $C_{31}$:$C_{32}$ ratio were 9.59 and 11.33% below than the measured intake. According to these results, alkane $C_{33}$:$C_{32}$ ratio is better than alkane $C_{31}$:$C_{32}$ ratio for the estimation of intake by beef steers.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1493-1494
• /
• 1998

We have investigated the influence of Ti/Ba mole ratio in the characteristics of the modified $BaTiO_3$ systems with Ca addition. The specimens were fabricated with variations in Ti/Ba mole ratio between 0.995 and 1.01, and sintered in the temperature range between $1325^{\circ}C$ and $1375^{\circ}C$. When Ti/Ba mole ratio was 1.005 and sintering temperature was $1350^{\circ}C$, the breakdown voltage shows 260[V /mm].

• Korean Journal of Biological Psychiatry
• /
• v.17 no.3
• /
• pp.136-144
• /
• 2010

Objectives : The $2^{nd}$ to $4^{th}$ digit length(2D : 4D) ratio reflects the amount of exposure and sensitivity to the prenatal sex hormone and it is considered to be the most convenient and useful way to understand the influence of sex hormone in the determination of human behavioral traits. This study was carried out to find the correlation between the 2D : 4D ratio and characteristics of temperament and character in Korean university students. We assumed that 2D : 4D ratio would show a strong correlation with temperament which is defined to be an inclination of an automatical emotional response to a stimulus. Methods : Participants were 104 university students who completed 2 self-report measures : Temperament and Character Inventory(TCI), Temperament Test. We examined the 2D : 4D ratio of each subject by measuring the lengths of the $2^{nd}$ and $4^{th}$ fingers using a photocopy measurement. We performed statistical analyses using correlation test and t-test to examine the relationship between 2D : 4D ratio and psychological characteristics. Results : We found out the typical sex difference in 2D : 4D ratio. Women had significantly higher 2D : 4D ratio than men. TCI-Character factor(TCI-C) didn't show any significant correlation with the 2D : 4D ratio. TCI-Tempterament factor(TCI-T) and the item of Temperament Test showed a significant correlation with the 2D : 4D ratio. In correlation analysis of the total group including all women and men, the 2D : 4D ratio showed a significant positive correlation in a subscale(shyness with stranger) of harm avoidance scales in TCI-T. In correlation analysis of women's group, the 2D : 4D ratio showed a significant positive correlation in two subscales( fear of uncertainty) and[shyness to stranger] of harm avoidance scales in TCI-T. In correlation analysis of men's group, the 2D : 4D ratio showed a significant negative correlation with a sanguine temperament item of the Temperament Test. Conclusion : The results suggest that the amount of exposure to sex hormone in the prenatal period seems to have an impact on the determination of temperament and characteristics.

• Journal of Power System Engineering
• /
• v.4 no.1
• /
• pp.81-87
• /
• 2000

In this study, CT specimens were prepared from ASTM SA516 Gr. 70 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C,\;-60^{\circ}C,\;-80^{\circ}C\;and\;-100^{\circ}C$ and in the range of stress ratio of 0.05 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\Delta}K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm $d{\alpha}/dN\;-{\Delta}K$ in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate $d{\alpha}/dN$ is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.666-670
• /
• 2004

VLSI 소자에서 design rule(D/R)이 작아져 각 단위 Pattern의 size가 작아짐에 따라 aspect ratio가 커지게 되었다. 산화막 contact etch를 하는데 있어 산화막 측벽을 보호하는데, 이러한 보호막은 주로 fluoro-carbon 계열의 polymer precursor들이 사용된다. Aspect ratio(A/R)가 5 이하일 때에는 측벽의 보호막에 의한 바닥 변형이 문제가 되지 않으나, 10 이상의 A/R를 가진 contact에서는 크기가 줄고, 모양이 불균형하게 변하는 바닥 변형을 쉴게 관찰할 수 있다. 이러한 바닥 변형이 커지면 contact 저항이 높아지는 것은 물론이고, 심하게는 하부 pattern과 overlap 불량을 유발할 수 있다. 본 논문에서는 바닥변형을 일으키는 원인을 분석하고 fluoro-carbon 계열의 polymer precursor의 종류$(C_4_F6\;vs.\;C_3F_8)$에 따른 polymer증착 상태 확인 및 pattern비대칭에 따른 바닥 변형의 고찰과 plasma etching 시 H/W 변형을 통해 바닥 변형이 거의 없는 조건을 찾아낼 수 있었다.