• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.413-420
• /
• 2011

This paper proposes a new adaptive algorithm to cancel the acoustic feedback and noise signals in the binaural hearing aids. The convergence performances of the proposed algorithm are improved by updating coefficients of the feedback canceller after the speech signal is cancelled from the residual signal with dual microphones. The feedback canceller firstly cancels the feedback signal from the microphone signal, and then the noise canceller reduces the noise by the beamforming method. To assure that binaural hearing aids converge stably, the left-sided hearing aid only is converged firstly, next the right-sided hearing aid only is converged. To verify performances of the proposed algorithm, simulations were carried out for a speech. As the results of simulations, it was proved that we can advance 14.43dB SFR(Signal to Feedback Ratio) on the average for the feedback canceller, 10.19dB SNR(Signal to Noise Ratio) improvement on the average for the noise canceller, in case that this algorithm is used.

• Journal of ILASS-Korea
• /
• v.7 no.1
• /
• pp.14-20
• /
• 2002

It is well known that the flow and spray characteristics is critical factor on the performance and emission of a direct injection diesel engine. So this study aims to investigate the interaction of flow and spray characteristics. At first, in cylinder flow distributions in swirl adaptor for 4-valve cylinder head of DI Diesel engine were investigated under steady conditions for different SCV angles mounted on the cylinder head with steady rig test and 2-D LDV. And the in-cylinder flow was quantified in terms of mean flow coefficient and swirl ratio/tumble ratio. It was found that the swirl ratio is controlled between 2.3 and 3.8. Then spray characteristics of the intermittent injection were investigated. PDA system was utilized for measurement of a droplet size and velocity. The analyses of the PDA results are carried out with Time Dividing Method. It was found that there is a correlation between the swirl flow and SMD. The droplet size and the velocity were nearly constant value with each SCV angle. And the swirl ratio is higher, SMD smaller. The swirl ratio was helpful factor to the atomization of droplet.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.46-49
• /
• 2002

Recent trends of low-temperature polycrystalline Si (LTPS) TFT technologies are presented. Characteristics of LTPS TFT processes are compared with those of a-Si TFT's. In order to compete with well-established a-Si TFT-LCD technology, LTPS process has to be as simple as possible. One of the most critical processes, recrystallization of a-Si thin films, could be the process for the differentiation of LTPS technology. Along with these technical reviews, a recent development of the 5.0-inch LTPS TFT-LCD is presented. In order to achieve high-performance display characteristics and save the power consumption, the transflective mode is adopted. The 5.0-inch display with 186 pixel-per-inch, high-resolution LCD was measured to be 10% for the reflectance and 70:1 for the contrast ratio. This display is designed for a high information content hand-held PC (HHPC) application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.693-696
• /
• 2001

The (Ba$_{0.3}$Bi$_{0.3}$Sr$_{0.4}$)TiO$_3$[BBST] ceramics were prepared by conventional mixed oxide method. The structural properties of the BBST ceramics with sintering temperature were investigated by XRD, SEM, EDS. In the case of BBST ceramics sintered at 1150~135$0^{\circ}C$, the $Ba_{0.5}$Sr$_{0.5}$TiO$_3$and SrBi$_4$Ti$_4$O$_{15}$ phase were coexisted. The 2$\theta$ value of the BST (110) peaks were shifted to the lower degree at the sintering temperature of 130$0^{\circ}C$ and 135$0^{\circ}C$. The grains of the BBST ceramics sintered at 130$0^{\circ}C$ and 135$0^{\circ}C$ were not appeared. Increasing the sintering temperature, the densities of the BBST ceramics were increased. In the BBST ceramics sintered at 130$0^{\circ}C$ and 135$0^{\circ}C$, the mole ratio of Bi was decreased.d.ed.d.d.d.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.261-269
• /
• 2012

The cyclic dimers of enkephalin were isolated as minor components during the solution synthesis of the corresponding cyclic monomers. The ratio of cyclic dimer to monomer was approximately 1:4 from the percent of yields. In the receptor binding assay of two cyclic dimmers, ($Tyr_2-C[D-Glu-Phe-gPhe]_2$ 6, $Tyr_2-C[D-Asp-Phe-gPhe-rLeu]_2$ 8), both analogs exhibited the high preference for ${\delta}$ receptor compared to monocyclic counterparts. In the nociceptive activity, both showed about 5 times less potent than the cyclic monomers. The repeated synthesis of 14-membered cyclic analog, Tyr-C[D-Glu-Phe-gPhe-D-rLeu] 14, which was known as having three distinct cis-trans isomers, gave rise to apparently different conformational analog arousing only trans isomer. In the receptor binding assay, it showed tremendously high selectivity toward ${\mu}$ receptor $({\delta}/{\mu}=160)$.

• Korean Journal of Poultry Science
• /
• v.40 no.4
• /
• pp.291-297
• /
• 2013

This study was conducted to evaluate the productivity of Korean native chicken (KNC) 2 strains crossbred. The number of chicks analyzed in this study was 300. Crossbreds used in this studywere A) KNC R strains ${\times}$ KNC meat type S strains, B) KNC egg-meat D strains ${\times}$ KNC meat type H strains, C) KNC egg-meat D strains ${\times}$ KNC meat type S strains, D) KNC egg-meat C strains ${\times}$ KNC native Y strains, and E) KNC native Y strains ${\times}$ KNC meat type H strains. The crossbreds C had the highest performance on body weight gains at 7~10 weeks but crossbreds D showed the lowest (p<0.05). The feed conversion ratio of crossbreds D was the highest value at every weeks (p<0.05). But the carcass weight and carcass ratio of crossbreds D was the lowest value at every weeks (p<0.05). For the percentage of cutted meat, the ranges of mean were 30.60~33.75% in breast, 21.48~24.72% in leg, 11.95~14.33% in wing, 21.91~25.83% in back and of 7.38~8.72% in neck. The percentage of cutted meat for leg was the highest value at every weeks (p<0.05). These results suggested that the development of new crossbreds should be necessary for better performance.

• YAKHAK HOEJI
• /
• v.30 no.6
• /
• pp.352-355
• /
• 1986

Methyl-6-deoxy-$\beta$-L-idopyranoside was prepared in good yield by treatment of methyl 2,3,4-tri-O-benzyl-6-deoxy-$\alpha$-D-xylo-hex-5-enopyranoside with H$_2$ on pd, followed by reaction of Na/NH$_3$ at $-50^{\circ}C$. The ratio of L-idopyranoside and D-glucopyranoside was 7 to 1 in 80.7%. It was confirmed that L-idopyranoside was 1C conformation as being expected.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.888-892
• /
• 2014

This paper evaluates $C_{50}$ in elementary school classrooms and considers utilization of $C_{50}$ as an assessment indicator of acoustic performance. $C_{50}$ is early-to-late arriving sound ratio, recent study reported that $C_{50}$ is more appropriate as a measure of clarity and speech intelligibility than D50 because it is linearly related to subjective responses. The average of $C_{50}$ in elementary school classrooms appeared to be about +2 dB ~ +3 dB throughout 500 Hz ~ 4 kHz. However, absolute evaluation is difficult because there is no suitable reference or standard yet. As deviation of $C_{50}$ according to location is larger than reverberation time, it is expected that $C_{50}$ will be more sensitive when someone assesses acoustic performance of classrooms. Correlation between $C_{50}$ and reverberation time is very high. From logarithmic regression equation, we can estimate appropriate range of $C_{50}$ in elementary school classrooms indirectly, using standard of reverberation time in ANSI.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.543-546
• /
• 2008

In the present study, the effect of cold reduction ratio on the spherodization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $800^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ for 5 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure. Cold rolling was conducted on the sheets of fine pearlite by reduction ratios of 20, 30, and 40 % and heat treatment for spheroidization was carried out at $720^{\circ}C$ for the various time intervals from 0.1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.55-57
• /
• 2002

In industry, A pallet truck is drived mainly by d.c motor, because it use to battery for input power. However, d.c motor has a brush, this is the disadvantage of the d.c motor for a pallet truck. Though a brushless d.c motor has a permanent magnet, it is for low torque. Switched reluctance motors(SRM) have the advantage a high torque/weight ratio, as the large reluctance torque is made by salient poles of both start and rotor, and a high reliability, this paper design the shape of the switched reluctance motor that will replace a d.c motor for A pallet truck. First of all, designed parameter of SRM, outer diameter, diameter of rotor and stock length, from the outputr equation considering electric loading and magnetic loading. Next, design diameter of stator and rotor, depth of slot pole width, air gap as inner size of motor. The design of SRM certify the torque, the efficiency and the output power by a simulation.