• Journal of Microbiology and Biotechnology
• /
• v.1 no.1
• /
• pp.75-78
• /
• 1991

The carotenoid biosynthesis of a red oleaginous yeast, Rhodotorula glutinis was significantly changed when the yeast was grown on different carbon substrates. The highest carotenoid production was obtained on culture medium containing glucose when the carbon to nitrogen ratio (C/N ratio) was adjusted to 25.7. Galactose stimulated the biosynthetic rate of torularhodin, a xanthophyll component of the yeast. With decreasing C/N ratio of the medium, significant changes of $\gamma$-carotene and torularhodin were observed such that increase in the torularhodin concentration was nearly equal to the decrease in $\gamma$-carotene. It was speculated that the nature of carbon substrate affected the metabolic rate of the cell, and accompanied by the different pattern of carotenoid accumulation in the cell.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.6
• /
• pp.708-716
• /
• 1988

Local heat transfer coefficients were measured on semi-cylinders on which a circular water jet impinged in crossflow. The ratio of the semi-cylinder's diameter and the nozzle outlet diameter were varied parametrically, as were the Reynolds number and the supplementary water heights. The measurements showed that the circumferential distribution of the heat transfer coefficient peaked at the stagnation point. For a fixed supplementary water height, the peak heat transfer coefficient was not depend on the curvature of test specimen(d/D). Optimum height of supplementary water which brought about the augmentation of heat transfer at the stagnation point was S/D=1. The Nusselt number decreased as the circumferential distance or angle increased. The circumferential distribution of dimensionless heat transfer (Nu/Nus) was independent of d/D ($d/D{\geq}8.33$), but for the d/D<8.33, it was depended on d/D. At a fixed angle of specimen, dimensionless heat transfer (Nu/Nus) decreased as the ratio d/D increased. The extent of the decrease between d/D=6.67 and 8.33 was markedly greater than that between d/D=8.33 and 10, or d/D=10 and 11.67.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.13-18
• /
• 2003

Heat pipes with binary mixture fabricated and tested for applications where condenser temperature is in a range of $10^{\circ}C$ to $130^{\circ}C$. The pipe materials 8.0 mm O.D. cupper tube and the working fluids are ethanol-water mixtures. The total length of test of the heat pipe was 1710mm in which evaporator section was 1570mm, adiabatic section was 50mm and condenser section was 90mm. Mixing ratios of ethanol and water could be variable in mole fraction. Temperature of condenser section was $10^{\circ}C$, $80^{\circ}C$ and $130^{\circ}C$. Heat pipe performance experimental study was accomplished with change of mixing ratio in these temperatures. The fill charge ratio was 20% of the heat pipe volume. Wick structure was woven-wire and method of experimental work was that thermal load was increased 20W step until the heat pipe wall temperature reached at $150^{\circ}C$. Results were following: At coolant $10^{\circ}C$ and $130^{\circ}C$, mixing ratio that have beat thermal performance was 0.8M+ and at coolant $80^{\circ}C$, was 0.3 ${\sim}$ 0.5 M+.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.5
• /
• pp.267-274
• /
• 2009

Titanium Chromium Nitrided (TiCrN) coatings were deposited on stainless steel 316 L and Si (100) wafer by inductively coupled plasma assisted D.C. magnetron sputtering at the various sputtering power on Cr target and $N_2/Ar$ gas ratio. Increasing the sputtering power of Cr target, XRD patterns were changed from TiCrN to nitride $Cr_2Ti$. The maximum hardness was $Hk_{3g}$ 3900 at $0.3\;N_2/Ar$ gas ratio. The thickness of the TiCrN films increased as the Cr target power increased, and it showed over $Hk_{5g}3100$ hardness at 100 W, 150 W. TiCrN films were deposited by the ICP assisted DC magnetron sputtering shown good wear resistance as the $N_2/Ar$ gas ratio was 0.1, 0.3.

• Journal of Biosystems Engineering
• /
• v.36 no.4
• /
• pp.267-272
• /
• 2011

The latent heat of vaporization in rough rice, brown rice, white rice and rice hull was calculated by Clausius-Clapeyron equation, which does not require complex constraints as in Othmer method. Equilibrium relative humidity and ratio of the latent heat of vaporization with ln$P_{\upsilon}$ and ln$P_S$ were estimated with moisture contents ranging from 10% (d.b.) to 36% (d.b.) with 2% (d.b.) increment and temperatures ranging from $10^{\circ}C$ to $50^{\circ}C$ with $2.5^{\circ}C$ increment. An empirical equation for calculating the latent heat of vaporization in rice was developed as a function of moisture content and temperature. The equation agreed well with the calculated results. The ratio for latent heat of vaporization were the greatest for white rice while they were similar among rough rice, brown rice and rice hull.

• Agribusiness and Information Management
• /
• v.7 no.1
• /
• pp.1-9
• /
• 2015

The purpose of this study is to develop a growth prediction model that can predict growth and development information influencing the production of citrus fruits: the growth model algorithm that can predict floral leaf ratio, number of fruit sets, fruit width, and overweight depending on the main period of growth and development with consideration of the applied weather factors. Every year, large scale of manpower was mobilized to investigate the production of outdoor-grown citrus fruits, but it was limited to recycling the data without an observation supporting system to systemize the database. This study intends to create a systematical database based on the basic data obtained through the observation supporting system in application of an algorithm according to the accumulated long term data and prepare a base for its continuous improvement and development. The importance of the observed data is increasingly recognized every year, and the citrus fruit observation supporting system is important for utilizing an effective policy and decision making according to various applications and analysis results through an interconnection and an integration of the investigated statistical data. The citrus fruit is a representative crop having a great ripple effect in Jeju agriculture. An early prediction of the growth and development information influencing the production of citrus fruits may be helpful for decision making in supply and demand control of agricultural products.

• Steel and Composite Structures
• /
• v.44 no.6
• /
• pp.883-898
• /
• 2022

A hollow-core partially-encased composite beam, named HPEC beam, is investigated in this paper. HPEC beam comprises I-beam, longitudinal reinforcement, stirrup, foam formwork, and cementitious grout. The foam formwork is located on both sides of the web, and cementitious grout is cast within the steel flange. To investigate the shear performance of HPEC beams, static loading tests of six HPEC beams and three control beams were conducted. The shear span ratio and the number of studs on the shear behavior of the HPECspecimens were studied. The failure mechanism was studied by analyzing the curves of shear force versus both deflection and strain. Based on the shear span ratio (𝜆), two typical shear failure modes were observed: shear compression failure when 1.6 ≤ 𝜆 ≤ 2; and diagonal compression failure when 𝜆 ≤ 1.15. Shear studs welded on the flange can significantly increase the shear capacity and integrity of HPEC beams. Flange welded shear studs are suggested. Based on the deformation coordination theory and superposition method, combined with the simplified modified compression field model and the Truss-arch model, Modified Deformation Coordination Truss-arch (M.D.C.T.) model was proposed. Compared with the shear capacity from YB9038-2006 and JGJ138-2016, the calculation results from M.D.C.T. model could provide reasonable predictions.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.1
• /
• pp.84-91
• /
• 2020

The PtBi/C and PtBiPd/C electrocatalysts were synthesized via the irreversible adsorption of Pd and Bi ions precursors on commercial Pt/C catalysts. XRD and XPS revealed the formation of an alloy structure among Pt, Bi, and Pd atoms. The current of direct formic acid oxidation (I_d) increased ~ 8 and 16 times for the PtBi/C and PtBiPd/C catalysts, respectively, than that of commercial Pt/C because of the electronic, geometric, and third body effects. In addition, the increased ratio between the current of direct formic acid oxidation (I_d) and the current of indirect formic acid oxidation (I_ind) for the PtBi/C and PtBiPd/C catalysts suggest that the dehydrogenation pathway is dominant with less CO formation on these catalysts.

• Journal of Environmental Health Sciences
• /
• v.10 no.1
• /
• pp.99-106
• /
• 1984

The diets used to this experiment were composed only of stock diet for group A, a mixture of stock diet and 2% cholesterol for group B, and 5%, 10% perilia powder for group C, D and 5%, 10% pine nut for group E, F in addition to group B diet respectively. All groups fed with these experimental diets for 3 weeks were fasted for 15 hours at the end of the experiment, and then they were decapitated to take serum. The serum was used to measure the level of glucose, total cholesterol, triglyceride, HDL-cholesterol and lipoprotein composition. The results were summarized as follows. 1. Perilla and pine nut diets have no influence on body weight and food intake in cholesterolfed male rats 2. The blood glucose level was not changed significantly at groups C-F. 3. Total cholesterol level was significantly decreased by 21.6% ~ 29.7% at group C-F than at group B. 4. HDL-cholesterol level was increased by 51.3% ~ 86.1% at group C-F than at Group B. 5. The $\alpha/\beta$ ratio which is 0.51 at the group A was risen to 0.99 at the group B. However, this ratio was decreased to 0.5 0 - 0.51 at group C, D and to 0.68 - 0.69 at group E.F.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.272-275
• /
• 2004

A balanced single side-band (SSB) mixer employing a sub-harmonic configuration is designed for up and down conversions in K-band. The designed mixer uses anti-parallel diode (APD) pairs to effectively eliminate even harmonics of the local oscillator (LO) spurious signal. To reduce the odd harmonics of LO at the RF port, we employ a balanced configuration for LO. The fabricated chip shows 12$\pm$2dB of conversion loss and image-rejection ratio of about 20dB for down conversion at RF frequencies of 24-27.5GHz. As an up-conversion mode, the designed chip shows 12dB of conversion loss and image-rejection ratio of 20 ～ 25 dB at RF frequencies of 25 to 27GHz. The odd harmonics of the LO are measured below -37dBc.