• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.9-14
• /
• 2005

The angular dependence(profile) of backward radiated ultrasound was measured for glass specimens with random surface roughness using ultrasonic goniometer that ran changes the incident angle continuously. It was concluded that the roughened region had greater acoustic impedance than the unperturbed region. The comparison of backward radiations showed that the amplitude of peak and the area of radiation profile were increased with surface roughness. It was suggested from the sensitive dependence of the profile area that the profile of backward radiation could be applied to in the nondestructive evaluation of sulfate region. Inclined C-scan technique with the transducer inclined at Rayleigh angle showed the reverse of luminosity and the high signal to noise ratio so that it provided high resolution.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.193-198
• /
• 1983

This experiment has been carried out for the purpose of investigating the effect of $V_2O_5$ and $H_3BO_3$ additives on sintering of magnesium oxide over the temperature range of 1300-150$0^{\circ}C$ MgO powder has been obtained by calcin-ing extra reagent grade magnesium carbonate(basic) at 90$0^{\circ}C$ for 30 minutes. The specimens were prepared by compression with pressure of 700Kg/cm2 then fired at 1300-150$0^{\circ}C$ for 0-5hrs. Sintering behaviour and microstructure of fired specimens were examined. Densification rates obeyed the equation D=K 1n t+C. The ratio of density in case of addition of $V_2O_5$ to theoretical density of pure periclase was 95-99% Activation energy of densification in case of $V_2O_5$ addition was 30.15 Kcal/mole. The range of average grain size in case of addition of $V_2O_5$ was 40-50$\mu\textrm{m}$. $H_3BO_3$ addtivie had not an effect on densification of MgO.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1603-1605
• /
• 1997

$LiNiO_2$ is prepared by heating LiOH $H_2O$ and $Ni(OH)_2$ (mole ratio 1:1). In this study, we investigated X-ray diffraction, and charge/discharge property heat treatment condition and conductive agent sort and volume of $LiNiO_2$ prepared at various temperature and time. All $LiNiO_2$ prepared at this study showed hexagonal structure. In charge/discharge capacities, heated at $O_2$ than air and $750^{\circ}C$ than $700^{\circ}C$, specific capacity is higher. Therefore, when preliminary heat at $650^{\circ}C$ $O_2$ and heat at $750^{\circ}C$ carried out, charge/discharge property is best.

• Journal of Surface Science and Engineering
• /
• v.50 no.6
• /
• pp.523-530
• /
• 2017

In this study, we developed the h-BN interphase for ceramic matrix composites (CMCs) through a wet chemical coating method, which has excellent price competitiveness and is a simple process as a departure from the existing high cost chemical vapor deposition method. The optimum condition for nitriding an h-BN interphase using boric acid and urea as precursors were derived, and the h-BN interphase coating through a wet method on a carbon preform of 2.5 D was conducted to apply the optimum conditions to the CMCs. In order to control the coating property via the wet coating method, four parameters were investigated such as dipping time of the specimen in the precursor solution, the ratio of boric acid and urea in the precursor, the concentration of solution where the precursor was dissolved, and the cycle of dipping and dry process. The CMCs was fabricated through polymer impregnation and pyrolysis (PIP) processes and a three-point flexural strength test was conducted to verify the role of the coated h-BN interphase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.248-251
• /
• 2003

In this paper, it was experimented about thermal and mechanical insulation properties of a elastic epoxy specimen. We made elastic epoxy specimen adding a ratio of 0[phr], 20[phr], 35[phr] and 53[phr] with modifier to existing epoxy. Each specimen was absorbed by 25h, 196h, 361h 484h with water. In water-absorption state, it was experimented a change of heat flows by temperature of elastic epoxy and changes of thermal expansion coefficient. Also, a hardness-change of each specimen was experimented by change of water-absorption time. In this experiment DSC (Differential Scanning Calorimetry) and TMA (Thermomechanical Analysis) were used. A temperature range of DSC was changed from -0[$^{\circ}C$] to 200[$^{\circ}C$], TMA was changed from -0[$^{\circ}C$] to 350[$^{\circ}C$]. In addition, we investigated structural analysis of water absorbed specimen using SEM (Scanning electron microscope).

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.449-458
• /
• 2007

The aims of this study were to investigate the intercalation of polymer chains with organoclays and improve the thermo-mechanical properties of poly(butylene terephthalate) (PBT) hybrids by comparing PBT hybrids synthesized using two different organoclays. The organoclays; dodecyltriphenylphosphonium-montmorillonite ($C_{12}PPh-MMT$) and dodecyltriphenylphosphonium-mica ($C_{12}PPh-Mica$), were used to fabricate the PBT hybrid fibers. Variations in the properties of the hybrid fibers with the organoclays within the polymer matrix, as well as the draw ratio (DR), are discussed. The thermo-mechanical properties and morphologies of the PBT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffraction, electron microscopy and mechanical tensile properties analysis. The nanostructures of the hybrid fibers were determined using both scanning and transmission electron microscopies, which showed some of the clay layers to be well dispersed within the matrix polymer, although some clustered or agglomerated particles were also detected. The thermal properties of the hybrid fibers were found to be better than those of the pure PBT fibers at a DR = 1. The tensile mechanical properties of the $C_{12}PPh-MMT$ hybrid fibers were found to worsen with increasing DR. However, the initial moduli of the $C_{12}PPh-Mica$ hybrid fibers were found to slightly increase on increasing the DR from 1 to 18.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.12
• /
• pp.1633-1639
• /
• 2009

This study investigated the effect of maternal undernutrition during late pregnancy on the growth and development of ovine fetal visceral organs. One hundred Mongolian ewes were mated at a synchronized oestrus and divided into three groups and offered 0.175 MJ ME $kgw^{-0.75}\;d^{-1}$ (Restricted Group1; RG1), 0.33 MJ ME $kgw^{-0.75}\;d^{-1}$ (Restricted Group2; RG2) and ad libitum access to feed (Control Group; CG) during late pregnancy (90 days). Selected animals in each group were slaughtered immediately at d 90 of pregnancy and after parturition (neonatal lambs), and major visceral organs were removed and weighed separately. The results indicated that the weights of lung (p<0.01), spleen (p<0.01), heart (p<0.05), liver (p<0.05) and abomasum (p<0.01) in RG1 were significantly lighter than those of CG. For RG2, only the weights of the lung (p<0.05) and spleen (p<0.01) were significantly lighter than those of CG; when expressed as a percentage of body weight, significance was retained in the spleen (p<0.01) for both restricted groups, but the percentage of brain in RG1 was significantly higher than that in CG (p<0.01). For lung and spleen, the amount of DNA was significantly lower (p<0.01) in both groups of restricted neonatal lambs compared to CG; however, there was a significant difference only between RG1 and CG for protein: DNA ratio (p<0.01). The DNA content of kidney, abomasum and jejunum were decreased (p<0.05) in RG1 neonatal lambs, but protein: DNA ratio in the liver was decreased compared with that of CG (p<0.05). The plane of maternal undernutrition during late pregnancy had a significant effect on the growth and development of fetal visceral organs, which altered ontogeny of fetal organ growth and development. These perturbations in fetal visceral development may have significant implications on postnatal growth and adult health.

• Journal of the Korean Society of Tobacco Science
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2011

This experiment was conducted as a part of Asia collaborative study on purpose of verifying the difference between CM6 and CM7 including 3R4F for reference. It carried out using various analytical categories for example, main stream, sidestream and Av. smoke. Additional analysis such as physical properties, blending ratio, combustibility and general leaf component analysis also implemented in order to investigate the difference. We complied with ISO standard and CORESTA recommended method during analytical operating procedures. In this study, we described that comparative analytical result for CM6 and CM7 known as reference or monitoring cigarettes including 3R4F for reference. All sample cigarettes were conditioned at $22^{\circ}C$, 60% relative humidity for 48 hours. Av. Smoke, MS and SS smoke analysis were performed over five times with two smoking condition, ISO and Health Canada with the exception of Av. smoke analysis. We complied with ISO standard method during analytical operating procedures. And, we conducted additional analysis, such as physical properties, blending ratio, combustibility and leaf component analysis also in order to investigate the difference. In conclusion, we found out some differences between CORESTA monitoring cigarette No. 6 and No 7. The smoke components such as total particulate matters, NFDPM, nicotine and carbon monoxide contents of CM7 were a little lower than CM6. And, these phenomena were the same as not only main stream smoke but also side stream smoke and Av. smoke. This tendency was consistent with ISO and Health Canada smoking condition. Besides, leaf constituents' color of CM7 was darker than CM6. In case of combustibility, it showed short combustion time approximately 30 seconds.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.758-766
• /
• 2007

High peak-to-average power ratio(PAPR) is one of serious problems in the orthogonal frequency division multiplexing(OFDM) systems. This paper proposes a PAPR reduction technique for limited feedback multiple input multiple output(MIMO) OFDM systems. The proposed method is based on the null space of the MIMO channel where a dummy signal is made in the channel's null space and then, subtracted from the original signal to reduce the PAPR. First, we show that a problem occurs when the existing method is directly applied to limited feedback MIMO case. Then, a weight function for the dummy signal is proposed to mitigate the degradation of the receiver performance while still reducing PAPR significantly. The weight function is derived from a constrained nonlinear optimization problem to minimize the mean square error between the received signal and its ideal signal. Simulation results shows that the proposed technique provides about 2.5dB PAPR reduction with 0.2dB bit-error probability loss.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2006

A breeding programme was initiated during 2001 utilizing two polyvoltine silkworm breeds viz. $BL_{69}$, an evolved breed tolerant to high temperature and MAR, comparatively resistant to Bombyx mori nuclear polyhedrosis virus (BmNPV) with the objective to develop robust polyvoltine breeds and hybrids. The breed $NP_1$ was developed by exposing the fifth instar larvae to high temperature $(36{\pm}1^{\circ}C)$, high Relative Humidity ($85{\pm}5%$ R.H.) and inoculating third instar larvae with BmNPV inoculum. At $F_{12}$, the breed was tested for hybrid forming ability utilizing six bivoltine silkworm breeds viz. $CSR_2,\;CSR_4,\;CSR_{17},\;CSR_{18},\;CSR_{19}\;and\;NB_4D_2$. The hybrid $'NP_1{\times}CSR_{17}'$ exhibited its superiority by recording 97.2% survival, 1.892 g cocoon weight, 0.406 g cocoon shell weight, 21.5% cocoon shell ratio, 16.6% raw silk percentage and 890 m filament length whereas the control $(PM{\times}CSR_2)$ has recorded 90.2% survival, 1.599 g cocoon weight, 0.304 g cocoon shell weight, 18.9% cocoon shell ratio, 13.1 % raw silk percentage and 768 m filament length. Commercial exploitation of the new $polyvoltine{\times}bivoltine$ hybrid in sericulture industry has been discussed.