• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.681-689
• /
• 2005

This paper presents an ultra wide band(UWB) mixer using anti-parallel diode pair(APDP) with simulation and measurement results. The proposed mixer adopts the even-harmonic direct conversion mixing, which consists of a couple of filter, in-phase wilkinson power divider, wideband $45^{\circ}$ power divider, and APDP. The m mixer is operating over 3.1 to 4.8 GHz and producing quadrature(I/Q) outputs with a conversion loss of 18 dB and input third order intercept point($IIP_3$) of 15 dBm. I/Q outputs also have difference of about 0.5 dB and phase difference of ${\times}3^{\circ}$ and $P_{1dB}$ of 2 dBm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.864-870
• /
• 2017

This paper describes a Dual Buck Converter with mode control using variable Frequency to Voltage for portable devices requiring wide load current. The inherent problems of PLL compensation and efficiency degradation in light load current that the conventional hysteretic buck converter has faced have been resolved by using the proposed Dual buck converter which include improved PFM Mode not to require compensation. The proposed mode controller can also improve the difficulty of detecting the load change of the mode controller, which is the main circuit of the conventional dual mode buck converter, and the slow mode switching speed. the proposed mode controller has mode switching time of at least 1.5us. The proposed DC-DC buck converter was implemented by using $0.18{\mu}m$ CMOS process and die size was $1.38mm{\times}1.37mm$. The post simulation results with inductor and capacitor including parasitic elements showed that the proposed circuit received the input of 2.7~3.3V and generated output of 1.2V with the output ripple voltage had the PFM mode of 65mV and 16mV at the fixed switching frequency of 2MHz in hysteretic mode under load currents of 1~500mA. The maximum efficiency of the proposed dual-mode buck converter is 95% at 80mA and is more than 85% efficient under load currents of 1~500mA.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.400-409
• /
• 2004

In this paper. a voice personality transformation method is proposed. which makes one person's voice sound like another person's voice. To transform the voice personality. vocal tract transfer function is used as a transformation parameter. Comparing with previous methods. the proposed method makes transformed speech closer to target speaker's voice in both subjective and objective points of view. Conversion between vocal tract transfer functions is implemented by classification of entire vector space followed by linear transformation for each cluster. LPC cepstrum is used as a feature parameter. A joint classification and transformation method is proposed, where optimum clusters and transformation matrices are simultaneously estimated in the sense of a minimum mean square error criterion. To evaluate the performance of the proposed method. transformation rules are generated from 150 sentences uttered by three male and on female speakers. These rules are then applied to another 150 sentences uttered by the same speakers. and objective evaluation and subjective listening tests are performed.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.31-40
• /
• 2015

The purpose of this paper is to propose a data transformation method for visualizing the statistical information based on the grid system which has regular shape and size. Grid is better solution than administrator boundary or census block to check the distribution of the statistical information and be able to use as a spatial unit on the map flexibly. On the other hand, we need the additional process to convert the various statistical information to grid if we use the current method which is areal interpolation. Therefore, this paper proposes the 3 steps to convert the various statistical information to grid. 1)Geocoding the statistical information, 2)Converting the spatial information through the defining the spatial relationship, 3)Attribute transformation considering the data scale measurement. This method applies to the population density of Seoul to convert to the grid. Especially, spatial autocorrelation is performed to check the consistency of grid display if the reference data is different for same statistic information. As a result, both distribution of grid are similar to each other when the population density data which is represented by census block and building is converted to grid. Through the result of implementation, it is demonstrated to be able to perform the consistent data conversion based on the proposed method.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.3-5
• /
• 2010

본 논문은 연료전지를 이용한 가정용 발전시스템의 계통 연계를 위한 3kW급 전력변환 시스템의 개발에 관한 것이다. 저전압 대전류 출력특성을 갖는 연료전지의 전류리플 최소화를 위해 멀티페이즈 컨버터를 적용한 DC/DC 승압 컨버터를 제안하고자 한다. 특히 고밀도 전력변환 시스템의 스위칭 손실 극소화를 위해 고효율 ZVS Soft-Switching 동작을 구현하였다. 또한 본 연구에서는 높은 승압비로 변환된 전압을 통해 계통운전 동작을 수행하기 위한 DC/AC 단상 인버터와 고효율 무결점 기능을 갖는 디지털 방식의 DSP를 적용한 제어기 개발도 병행하여 수행되었다. 제안하는 3kW급 멀티페이즈 컨버터 및 계통연계형 인버터의 Proto-Type을 제작하고 실험을 통해 본 방식의 타당성을 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.187-191
• /
• 2007

This paper describes a 3.3V 10 bit CMOS digital-to-analog converter with a divided architecture of a 7 MSB and a 3 LSB, which uses an optimal Thermal-to-Binary Decoding method with monotonicity, glitch energy. The output stage utilizes here implements a return-to-zero circuit to obtain the dynamic performance. Most of D/A converters in decoding circuit is complicated, occupies a large chip area. For these problems, this paper describes a D/A converter using an optimal Thermal-to-Binary Decoding method. the designed D/A converter using the CMOS n-well $0.35{\mu}m$ process0. The experimental data shows that the rise/fall time, settling time, and INL/DNL are 1.90ns/2.0ns, 12.79ns, and a less than ${\pm}2.5/{\pm}0.7$ LSB, respectively. The power dissipation of the D/A converter with a single power supply of 3.3V is about 250mW.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.151-154
• /
• 2002

반도체 소자의 기판 재료로 사용되고 있는 실리콘 웨이퍼는 그 정밀도가 매우 중요하다. 본 연구에서는 균일한 Dopant 농도 분포를 얻을 수 있는 중성자 변환 Doping을 이용하여 실리콘에 인(P)을 Doping하는 연구를 수행하였다. 중성자 변환 Doping, 즉 NTD(Neutron Transmutation Doping)란 원자번호 30인 실리콘 동위원소에 중성자가 조사되면 원자번호 31인 실리콘으로 변환되고, 2.6시간의 반감기를 갖고 decay 되면서 인(P)으로 변하게 되어 실리콘 웨이퍼에 n-type 전도를 갖게 하는 것을 말한다. 본 연구에서는 하나로 원자로를 이용하여 고저항(1000-2000Ωcm) FZ 실리콘 웨이퍼 에 두 개의 조사공에서 중성자 조사하여 저항의 변화를 관찰하였고, 중성자 조사시 발생하는 점결함을 분석하여 점결함이 저항 변화에 미치는 영향을 알아보았다. 중성자 조사 전 이론적 계산에 의해 HTS조사공은 5Ωcm, 20.1Ωcm 이고 IP3조사공은 5Ωcm, 26.5Ωcm, 32.5Ωcm 이었고, 중성자 조사 후 SRP로 측정한 결과 실제 저항값은 HTS-1 2.10Ωcm, HTS-2 7.21Ωcm 이었고, IP-1은 1.79Ωcm, IP-2는 6.83Ωcm, 마지막으로 IP-3는 9.23Ωcm 이었다. DLTS 측정 결과 IP조사공에서 새로운 피의 결을 발견할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1235-1239
• /
• 2010

In this work, a wideband technique has been proposed that improves the IF bandwidth of mixers and a 24-GHz down-conversion mixer employing the proposed technique has been designed and fabricated based on 0.13-${\mu}m$ RFCMOS technology. The mixer showed the conversion gain of $2.7{\pm}1.5$ dB from DC to 5.25 GHz IF for a fixed LO frequency of 24 GHz. Measured P-1dB and LO-RF isolation was -8.7 dBm and 21 dB, respectively. The mixer draws DC current of 10.6 mA from 1.3 V supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1120-1128
• /
• 2004

In this paper, we has designed and implemented Up-converter for K-band with high IMD3 performance using balanced power amplifier. It is consisted of PA module and, Local Oscillator module with reject Filter, mixer module and If block, and Up-converter has a local loop path to decide whether it operate or not and has the sensing port to inspect output power level. According to the power budget of designed Up-converter, K-band balanced power amplifier was fabricated by commercial MMIC. Measurement results of up-converter show about 40dB Gain, PldB of 29dBm and OIP3 was 38.25dBm, that is good performance compared to power budgets. We has adjusted gate voltage of MMIC to control more than 30 dB gain. This up-converter was used in transceiver for PTP and PTMP, and applied to digital communication system that use QAM and QPSK modulation.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.559-564
• /
• 2004

최근들어 광범위한 지역의 삼차원 국토정보 취득을 위한 고해상도 위성영상의 센서모형화 기법에 관한 연구가 활발히 진행되고 있다. IKONOS나 SPOT 5호와 같은 고해상도 위성영상의 모형화에 앞서 본 연구에서는 각종 응용분야에서 광범위하게 활용되고 있는 SPOT 3호 위성영상을 대상으로 지상기준점을 이용하여 경사촬영(off-nadir viewing)각을 추정하는 기법을 개발하였다. 추정된 경사촬영각은 영상좌표를 보정하는데 사용되었으며 2차원 부등각사상변환을 이용하여 기존의 모형화 방법 보다 간결하고 정확도가 향상된 모형화 기법을 제안하였다. 또한, 기존의 엄밀 센서 모형화 방법을 대체하고 있는 위성영상의 센서모형화를 위한 다양한 방법들이 제안되고 있기 때문에, 2차원 부등각사상변환, 직접선형변환(DLT), 자체검정-DLT(SDLT)등의 추상화된 모형화 방법을 SPOT 위성영상에 대해 기준점 수의 변화에 따라 검사점을 이용하여 수평성분, 수직성분으로 나누어 정확도를 비교 분석하였다.