• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1212-1221
• /
• 2010

A theoretical equation was proposed to consider the effect of fill and ponding for the excess pore water pressure in agricultural reservoir on soft clay ground. For the purpose of verification of the proposed equation, laboratory model tests and field tests were performed and excess pore water pressure was compared to those predicted with the Terzaghi's method. The degree of consolidation according to ponding predicted by applying the proposed equation was close to the observed degree of consolidation on the double drainage condition(at DP-3) but it was less than the observed degree of consolidation on the single drainage condition(at DP-5). The predicted excess pore water pressure according to fill and ponding was very applicable to practice because it was close to the observed data.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.569-574
• /
• 2005

The steel retaining wall(s.r.w) are not constructed broadly all over the world. So the method of the analysis and the estimation for the behavior of the s.r.w. the interactive behavior of the frame and the fill material. In this study, the numerical analysis using F.E.M. was made to analize the mutural relation of the frame and the fill material in prior to the s.r.w. model test.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.4
• /
• pp.1-4
• /
• 2002

As the application of semiconductor chips into electronics increases, it requires more complete integration, which results in higher performance. And it needs minimization in device design for cost saving of manufacture. Therefore oxide gap fill has become one of the major issues in sub-micron devices. Currently HDP (High-Density Plasma) CVD system is widely used in IMD (Inter Metal Dielectric) to fill narrower space between metal lines. However, HDP-CVD system has some potential problems such as plasma charging damage, metal damage and etc. Therefore, we will introduce about one of via resistance failure by metal damage and a preventive method in this paper.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.235-235
• /
• 2013

We reported on the characteristics of organic solar cells (OSCs) fabricated on $HNO_3$-treated multilayer graphene (MLG) transparent electrodes. MLG electrodes were prepared using a chemical vapor deposition and a multi-transfer process. Compared to organic solar cells (OSCs) on the ITO electrodes had a fill factor of 65.97%, and a power conversion efficiency (PCE) of 3.364%, OSCs on the MLG (three-layer graphene) electrodes with sheet resistance of $274{\pm}1{\Omega}$/square and transparency of 92.1% had a fill factor of 43.46%, and a power conversion efficiency (PCE) of 2.019%. However, OSCs on the HNO3-treated MLG electrodes with lower sheet resistance of $119{\pm}1{\Omega}$/square had a fill factor of 57.54%, and a PCE of 2.861%. The results would provide a promising method to improve the performance of large-area OSCs based on MLG electrodes.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.61-67
• /
• 2003

A new precess which consists of pre-dewatering device, post composting for solid phase and post sequencing batch reactor(SBR) for liquid phase was designed. Nitrogen in supernatants of dewatering device was removed by sequencing batch reactor. Experiments were carried out to investigate the SBR operation modes such as fill ratio, SRT, and operation cycle. The optimum fill ratio, SRT and aeration/non-aeration time were 1/12, 15days, and 2hr aeration / 1hr non aeraion, respectively. Methanol as an external carbon source increased denitrification when step feeding method was applied, not single feeding method.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.46-50
• /
• 2016

Beverage industry is the largest in the domestic packaging market. Usually, beverage is packed in palstic, glass, can and paper bags. However, the cost of these packaging methods are very high and the recycling are not easy to handle. Pouch packaging method is one of the packaging method to solve the drawbacks of former beverage containers. The pouch packaging methods are difficult to control, it requires a number of processes. A vertical form-fill-seal machine which is self-developed is the capable of processing in a single apparatus. In this paper, in order to develop a pouch equipment, the structure analysis was carried out for the main unit. The stress and deformation of feed unit which removes the air inside the pouch while feeding down has been analyzed. It receives the greatest impact from the rolling part. And also, the sealing unit has been analyzed. The analysis result shows that the stress and the deformation was slight to be applicable to the actual system.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.113-120
• /
• 2008

It is difficult to acquire good-quality fill material for levee in field and it is the most important factor of levee construction technology to use the bed sediment for the safe and economic construction. So, it is necessary to evaluate geotechnical characteristics of bed sediment, design and construction method through field application tests. In this study geotechnical characteristics of Hyunpoong bed sediment (SP) in Daegu were analyzed, and laboratory/field compaction test for mixing granite weathered soil (SW) was performed. And field mixing method was suggested.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.15-25
• /
• 2010

The main objective of this study was to offer informations about long-term seepage behavioral characteristics and to find a leakage safety management method for Juam Dam and Imha Dam, a central cored rockfill dams in Korea by the evaluating the automatically monitored leakage data. In the water leakage monitoring of fill dam, the generation of abnormal water leakage is difficult to directly detect due to the effect of outside factors such as the component of rainfall inherent in the observation value. Therefore, conventionally estimation methods of water leakage quantity were applied by multiple regression analysis considering reservoir water level, rainfall, etc.. However, the estimated error of rainfall component is relatively big in these method. This paper identifies the seepage characteristic of each dams which is not directly affected by rainfall through the hydrograph separation analysis and 3 dimensional analytical method, and thinks a leakage management method. It was noticed that two dams had site specific seepage behaviour features and were in stable state with the decreasing leakage quantity. It was also found that hydrograph separation method might be applicable to leakage safety management method.

• Geotechnical Engineering
• /
• v.15 no.2
• /
• pp.11-17
• /
• 1999

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.5
• /
• pp.1-9
• /
• 2009

In this study, the properties of shear wave velocity of coarse gravel in filldams are analyzed. Shear wave velocity is derived using the surface wave analysis method, which can be used nondestructively on the surface of filldams. These values are acquired through the tests for the rock zone of six filldams by SASW and HWAW methods. These analytical results are compared with results obtained through the frequently-used empirical method of Sawada and Takahashi.