• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.336-340
• /
• 2015

Three different types of polycarbonate (PC)/graphene oxide (GO) composites using diphenyl carbonate as a monomer were fabricated by melt polymerization. Those were the PC/GO composite (PC/GO) using a twin extruder, in-situ PC/GO composite (PC/GO-cat.) using a catalyst, and in-situ PC/GO composite (PC/GO-COCl) using a GO-COCl treated by -COCl, Chemical structures of the composites were confirmed by C-H and C=O stretching peak at $3000cm^{-1}$ and $1750cm^{-1}$, respectively. The slope for the storage (G') versus loss (G") modulus plot decreased with an increase in the heterogeneous property of polymer melts. So we can check the GO dispersion of the PC/GO composites using by the slop for G'-G" plot. According to the G'- G" slopes for three different types of PC/GO composites, GO was well dispersed within PC matrix in case of PC/GO and PC/GO-cat.. It was also confirmed by atomic force microscope (AFM) photos. One of the reasons for the poor GO dispersion of PC/GO-COCl is branching and crosslinking processes occurred during polymerization, which was further confirmed by a plot for the complex modulus versus phase difference.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.361-362
• /
• 2011

본 연구는 사건관련전위를 이용하여 정신병질자들이 정서인식에 따른 반응억제의 어려움이 있는지를 알아보기 위해 수행되었다. 교도소에 수용 중인 수형자들을 대상으로 PCL-R(Psychopathy Checklist-Revised)의 점수에 따라 6명의 정신병질 수형자집단과 4명의 정상 수형자집단을 선별하고, 얼굴자극을 이용한 시각 Go/NoGo 과제를 실시하였다. 모든 피험자들은 Go 자극에 버튼을 누르고 NoGo 자극에 버튼을 누르지 않도록 지시를 받았으며, 과제를 실시하는 동안 사건관련전위를 측정하였다. 과제 1에서는 공포표정을 NoGo자극으로 사용하고 중성표정을 Go자극으로 사용하였으며, 과제 2에서는 슬픈 표정을 NoGo자극으로 사용하고 중성표정을 Go자극으로 사용하였다. 정신병질 수형자집단은 공포표정의 NoGo P3 진폭이 중성표정의 Go P3 진폭보다 크게 나타난 반면에 정상 수형자집단은 공포표정과 중성표정 간의 P3 요인의 진폭이 유사하거나 공포표정의 NoGo P3 진폭보다 중성표정의 Go P3 진폭이 더 크게 나타났다. P3 잠재기를 분석한 결과, 정신병질 수형자집단은 슬픔 표정자극의 NoGo조건에서 중성표정자극의 Go조건보다 느린 P3 잠재기를 나타낸 반면, 정상 수형자집단은 NoGo조건에서 Go조건보다 빠른 P3 잠재기를 나타냈다. 정서인식검사결과, 정신병질 수형자집단은 정상 수형자 집단보다 유의미하게 낮은 정확도를 나타냈다. 이러한 결과는 정신병질자들이 공포, 슬픔과 같은 부정적인 정서를 인식한 후에 반응을 억제하는데 인지적인 어려움을 겪는다는 것을 보여준다.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.180-184
• /
• 2015

PP-grafted GO was prepared by the reaction of graphene oxide (GO) containing 2-bromoisobuyryl groups and polypropylene (PP) having hydroxyl groups (PP-OH) via a "grafting-to" method. GO-Br was synthesized by the reaction of GO and 2-bromoisobutyryl bromide under a basic condition. PP-MAH was reacted with ethanolamine to produce PP-OH. The melting temperature of PP-grafted GO was shifted to the higher temperature than that of PP-OH. Also, the thermal stability of PP-grafted GO was increased as compared to PP-OH and GO. These results demonstrated that the grafted coating polymer PP was effective for enhancing the thermal stability of GO. The higher surface roughness of PP-grafted GO was resulted from the chemical attachment of PP on the surface of GO. The characterization of PP-grafted GO was conducted from Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscope (SEM).

• Composites Research
• /
• v.36 no.3
• /
• pp.167-172
• /
• 2023

The manufacturing technology of composite material is applicable with filler characteristics maintaining low cost, flexibility, and easy process to develope the various functional composite materials. To realize functional composites, various researches on the high performance of composite materials using graphene as a filler is being actively conducted. In this study, physical and chemical properties were investigated using graphene to improve high functional properties. Graphene oxide (GO) was prepared using graphane nanoplatelet (GNP), and reduced graphene oxide (R-GO) was formed by reducing GO. The physical properties of GO and R-GO were analyzed, and the reliability of the manufactured method was reviewed by comparing that of GNP results. As a result of analysis by Raman spectroscopy, in the case of R-GO, it was confirmed that the intensity of D-peak and G-peak decreased compared to GO, and an increase of 0.08 was observed through the ratio of ID/IG. For the FTIR results, GO and RGO has a repeating C-C and C=C connection structure unlike GNP. GO and R-GO show clear peaks for C-O bond, C=C bond, C=O bond, and O-H bonding. As a result of X-ray diffraction analysis, GNP showed a wide diffraction peak at 25.86° of (002) plane characteristics, whereas GO and R-GO showed peaks corresponding to (001) and (100) planes. It was also found that the interlayer distance of GO increased by about 2.6 times compared to GNP.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.357-365
• /
• 2012

There are orthodontic treatment which involves tooth movements and orthopedic treatment which involves skeletal movement. In childhood and adolescence, especially for the treatment of orthopedic treatment, the evaluation of bone maturity and growth potential is very important. The purpose of this study is to assess the developmental stage and to compare the amount of mandibular growth with cephalometric radiographs and hand-wrist radiograph in 6 to 13-year-old children with normal occlusion. The results are as follows : SMI and CVM showed a significant correlation (p < 0.05). Ar-Go, Co-Go, N-Go, S-Gn, N-Me, Co-Gn, Go-Me, Go-Gn increased with increasing maturity of hand-wrist and Ar-Go, Co-Go, N-Go, S-Gn, N-Me, Co-Gn, Go-Me, Go-Gn increased with increasing maturity of cervical vertebrae maturation. Also Ar-Go, Co-Go, N-Go, S-Gn, N-Me, Co-Gn, Go-Me, Go-Gn showed a significant correlation with each of the cervical vertebrae maturation stages and hand-wrist maturation stages (p < 0.05). These results suggested that mandibular growth had a significant correlation with cervical vertebrae maturation stages and hand-wrist maturation stages.

• Membrane Journal
• /
• v.31 no.6
• /
• pp.404-416
• /
• 2021

In this study, a mixed matrix membrane was prepared by varying the contents of GO and PEI-GO synthesized in PEBAX2533, and the permeation characteristics of N₂ and CO₂ were studied. The N₂ and CO₂ permeability of the PEBAX/GO mixed membrane decreased as the GO content increased, and showed the highest CO₂/N₂ selectivity of 58.9 at GO 0.3 wt%. For the PEBAX/PEI-GO mixed membrane, the N₂ permeability decreased as the PEI-GO content increased, and the CO₂ permeability showed a different trend according to the PEI-GO content. Overall, the CO₂/N₂ selectivity was higher than that of the PEBAX/GO mixed membrane. In particular, PEI-GO 0.3 wt% showed the highest CO₂/N₂ selectivity of 73.5 among the mixed membranes, and a positive result was obtained as it was located above the Robeson upper bound. This is believed to be due to the molecular sieving channel effect resulting from the original GO structure, the functional groups present in the structure of GO having affinity for CO₂, and the effect of amine bound to PEI by modifying GO into PEI.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.431-441
• /
• 2021

In this study, PEBAX/GO-PEI and PEBAX/ZIF-8@GO-PEI composite membranes were prepared by varying the contents of GO and ZIF-8@GO in PEBAX, and also the gas permeation characteristics of N₂ and CO₂ was studied. Overall, the N₂ and CO₂ permeability of the PEBAX/GO-PEI composite membrane decreased as the GO content increased, and the CO₂/N₂ selectivity slightly increased. In the case of PEBAX/ZIF-8@GO-PEI composite membrane, the permeability of N₂ decreased, but CO₂ increased to 1 wt% of ZIF-8@GO and then decreased in the content thereafter. The CO₂/N₂ selectivity at 1 wt% of ZIF-8@GO was 92.3, showing the highest selectivity. This is thought to be due to the greatest effect of GO and ZIF-8 with good affinity for CO₂ alongside the effect of porosity ZIF-8 while improving compatibility with PEBAX and dispersing evenly. In addition, PEBAX/ZIF-8@GO-PEI composite membrane improved both CO₂ permeability and CO₂/N₂ selectivity than those of the PEBAX-PEI and PEBAX/GO-PEI membranes, except for ZIF-8@GO 5 wt%. The result was close to the Robeson upper bound.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.22-28
• /
• 2012

Functionalized graphene/epoxy composites were prepared to miprove thermal conductivities of epoxy composites and to maintain electrical insulating property. Graphene oxide (GO) was prepared using Hummers method, and then GO was reacted with aluminum isopropoxide to functionalize $Al(OH)_3$ layer onto GO surface by a simple sol-gel method (Al-GO). GO and Al-GO were characterized by X-ray photoelectron spectroscopy, field emission scanning electron microscopy and transmission electron microscopy. The analyses confirm that GO was coated with a large and dense coverage of $Al(OH)_3$. GO and Al-GO (1 and 3 wt%) were embedded in bisphenol A (DGEBA) to investigate the effects of electrical insulating property. Electrical resistivity showed that Al-GO had better insulating property than GO. Further, the thermal conductivity of GO and Al-GO/epoxy composites was higher than that of neat epoxy resins. In particular, the thermal conductivity of Al-GO/bisphenol F (DGEBF) improved by 23.3% and Al-GO/DGEBA enhanced by 21.8% compared with pure epoxy resins.

• The Journal of Korean Association of Computer Education
• /
• v.20 no.1
• /
• pp.49-62
• /
• 2017

This paper aims to deeply investigate the interactive patterns between a robot teacher and a participating gifted student who assembled GoGo Bumper car and controlled it with GoGo Monitor commands. Two days of classroom activities for the GoGo Bumper car project were videotaped between July 29 and 30 in 2013. Extra video-based recall interviews were also conducted three times between Nov 2013 and Jan 2014. The qualitative analysis of video data, GoGo Monitor codes and interview data revealed several unfolding patterns of computational thinking. The participating student while interacting with a robot teacher often contemplated and coded on his own ways as he worked with GoGo board testing and assembling a GoGo Bumper car. The overall process of coding and testing his own ideas by finding out relevant commands and arranging them attuned to his computational strategies seems to be cyclic.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.53-58
• /
• 2015

Polycarbonate (PC)/graphene oxide (GO) composites with 3 phr of GO were prepared by using a twin screw extruder at 240, 260, and $280^{\circ}C$ after mixing the solution with chloroform. It was confirmed by DSC and TGA that the glass transition temperature ($T_g$) of PC/GO composites were not changed and the thermal stability was the best in case of the extrusion temperature at $260^{\circ}C$. Thermo mechanical properties of PC/GO composites according to extrusion temperatures were measured by dynamic mechanical analysis (DMA). Storage moduli of PC/GO composites were higher than that of pure PC and there was no detectable changes at varying the extrusion temperature. Based on these results, the extrusion temperature of PC/GO composites was fixed at $260^{\circ}C$. The degree of the chemical reaction of PC/GO composites with respect to the GO reduction time was confirmed by the C-H stretching peak at $3000cm^{-1}$ and the degree of the chemical reaction was similar to that of GO when the reduction time was 1 h. A decrease in the complex viscosity as a function of the GO reduction time was detected by dynamic rheometer, which may be originated from the enhancement of GO dispersion by PC-GO reaction. The GO dispersion was confirmed by scanning electron microscope (SEM).