• Journal of Korean Society of Steel Construction
• /
• v.14 no.4
• /
• pp.471-479
• /
• 2002

In this paper, 18 square CFT columns filled with high-strength concrete were tested under concentric or eccentric axial loading. Two parameters of the experimental program included the buckling length-section depth ratio ($L_K$/D) and the eccentricity of the appled compressive load (e). In additon, mechanical properties such as the compressive concrete strength and compressive and tensile steel strength were measured and incorporated into the material models for the stress-strain relationships of concrete and steel. This model was used in an elasto-plastic analysis in order to predict the behavior of the slender CFT columns. Observtions of the failure mode during the tests under axial loadig were also presented. The strengths obtained from the analysis. Recommendations for Design, and Constructions of CFT structures were presented, as verified by the experimental results.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.532-535
• /
• 2009

본 논문은 초고압 전력케이블의 접속재 개발을 위한 연구결과로써, 접속시스템의 핵심기술인 고절연 고무슬리브 및 현장에서 접속 작업의 용이성을 위한 Carrier Pipe의 구조해석과 전기적 절연설계에 의한 주요부의 전기적 특성과 전계의 집중을 완화하기 위해 Simulation Tool을 이용한 수치해석 등을 실시하여 최적화된 제품을 제작하였다. 절연설계 및 전계완화 해석에서는 고절연 고무슬리브 구조에서 전계가 집중될 수 있는 중요 포인트를 벡터로 선정하였고 이를 기초로 전계해석을 진행하여 선정된 포인트들에서 전계가 집중됨을 검증하였다. 접속재의 수축거동 해석에 의하면, Carrier Pipe의 구조적 안전성을 확보하기 위하여 고절연 고무슬리브로부터의 압력을 구하여 계산한 결과 최소한 9mm이상의 Carrier Pipe 두께가 필요한 것으로 파악 되었다. 이것은 충분한 강도뿐만 아니라 Carrier Pipe의 변형발생으로 인한 현장에서의 설치문제까지 고려하게 된 값이다. 고절연 고무슬리브 제품설계 에서는 고절연 고무슬리브의 특성조건을 설정하였고 고절연 고무슬리브 제품 및 Carrier Pipe의 Interface 설계 기준을 파악하기 위하여 기존의 고절연 고무슬리브를 활용하여 Carrier Pipe와의 장착 Test를 진행하였다. 그 결과, 확장비율 110%로 적용하였을 경우는 30시간 후에는 완전 붕괴가 되었고, 붕괴가 시작되는 지점이 고절연 고무슬리브의 중앙매립전극 경계면으로써, Simulation Tool을 활용한 접속재 수축 거동 해석 결과와도 일치함을 검증 할 수 있었다.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.43-54
• /
• 2008

In this paper, we implement an automatic entity information management system for smart refrigerator using RFID technology in which objects containing electronic tags are automatically identified using radio wave. Unlike current "smart" refrigerators, the system presented in this paper implements smart tag information acquisition mechanism and real-time information management system to provide various information on entities in refrigerators to local and remote users. As the first step, this paper analyzes the requirements for smart refrigerator system based on the RFID and suggests design considerations. Based on the analysis, we propose and implement an efficient tag location tracking method based on antenna transfer method and an intelligent tag information management system based on embedded database and web server. We also provide a wide range of experimental results on the number of tags identified at a time and the tag recognition ratio according to the RFID antenna transfer speed and the angle between tag reader and tags.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.287-297
• /
• 2012

To develop 80MPa-high strength concrete with ternary cement used in OPC, blast-furnance slag, and fly ash, mixing ratio of blast-furnace slag and fly ash was evaluated in material characteristics before and after hardening of the high strength concrete. According to the evaluated results of material characteristics before and after hardening of the high strength concrete, the flowability and long-term compressive strength increase up to 30% mixing ratio of blast-furnace slag and fly ash. Also, it is superior to characteristics of length change and neutralization due to the use of mineral admixture when compared in test sample mixed with OPC. The evaluated results show that material characteristics of the high strength concrete was the most outstanding performance at blast-furnace slag of 25% and fly ash of 15%. The result of this study will be useful for the development of high strength concrete as a substitute of costly silica fume in the near future.

• Environmental Analysis Health and Toxicology
• /
• v.20 no.1
• /
• pp.39-45
• /
• 2005

Renin-angiotensin system (RAS)은 혈압 조절에 중요한 역할을 수행하는 생리적 조절계로써, 이 system 을 구성하는 유전자들의 이상은 본태성 고혈압의 발병과 유의하게 관련된 것으로 알려졌다. RAS의 주요한 구성 성분인 angiotensin II는 2종류의 수용체인 angiotensin II type I receptor(AT₁R)와 angiotensin II type I receptor(AT₂R)에 의해 그 효과가 매개되기 때문에, 이 수용체를 암호하는 유전자는 본태성 고혈압의 유력한 후보 유전자라고 볼 수 있다. 현재가지의 연구에 의하면, AT₁R 유전자에 존재하는 유전적 변이와 본태성 고혈압과의 관련성에 관해서는 많은 보고들이 있었지만, AT₂R 유전자에 존재하는 유전적 변이 가 본태성 고혈압에 유의한 효과를 나타내는 지에 관해서는 이렇다할 연구 성과가 별로 없는 실정이다. 이에 본 연구에서는 한국인 집단을 대상으로 하여, AT₂R 유전자에 존재하는 C3123A 다형성이 한국인 집단에서 본태성 고혈압과 유의한 관련성이 있는 지를 분석하였다. 이 유전자는 인간의 X 염색체에 존재하기 때문에, 여성인 경우에는 CC, CA및 AA로 이루어진 3유전자형이 존재하지만, 남성인 경우에는 C와 A로 이루어진 2종류의 대립 유전자로 구성되어 있기 때문에, 본 연구에서는 남성과 여성을 개별적으로 나누어서 분석하였다. 연구 결과, AT₂R 유전자에 존재하는 C3123A 다형성은 남녀 모두에서 본태성 고혈압과 유의한 관련성을 나타내지 않았다(P>0.05). 그렇지만, 이 다형성에 대한 대립 유전자 빈도를 서양인 집단과 비교했을 경우에는, 한국인을 대상으로 한 본 연구에서 A 대립 유전자 빈도가 0.33인 반면에 서양인 집단은 그 빈도가 0.43～0.48로 한국인 집단보다 높은 값을 나타내었다. 따라서, AT₂R 유전자에 존재하는 C3123A 다형성과 본태성 고혈압과의 관련성에 대해서는 한국인과 유전적 배경이 다른 서양인 집단을 대상으로 한 추시가 필요할 것으로 사료된다.

• Journal of The Korean Association of Information Education
• /
• v.22 no.5
• /
• pp.545-556
• /
• 2018

The purpose of this study is to suggest the knowledge elements for HPC education in computational science. For this purpose, the survey for HPC experts was conducted to verify the content validity and reliability, and the 20 candidate knowledge elements was extracted. And the second survey for HPC users was conducted to apply the t test, Borich requirement, and The Locus for Focus model. And 10 knowledge elements for HPC education were derived. As a result, the first group was 'Parallelism Fundamentals', 'Parallelism', 'Parallel communication and coordination', 'Parallel Decomposition', 'Parallel Algorithms, Analysis, and Programming' and 'Introduction to Modeling and Simulation', 'Fundamental Programming Concepts', 'Fundamental Data Structures', 'Memory Management', 'Algorithms and Design' were second group for HPC education.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.401-404
• /
• 2008

This study exploited the design of mixture proportion for the high strength concrete to establish the method of the quality control and high strength ready-mixed concrete for the application to the construction filed systematically how to output the estimated formula which could forecast mixture proportion for the high strength concrete classed 40${\sim}$60MPa through a experiment. It might contribute for systematic establishment of the method of the quality control and high strength ready-mixed concrete because it was possessed of the function of common data though a server, preservation and output of data, and estimation for the design of mixture proportion for the high strength concrete due to the experimental result, and Visual Basic, MS-SQL were used. Simply, it was produced corresponding to the condition of a laboratory, so it could be fundamental data for the design of mixture proportion for the high strength concrete. If upgrade is enforced with mixture proportion data of the each factory after then, it may contribute to the stability on quality and manufacture of high strength ready-mixed concrete to agree with the properties of each factory.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.151-159
• /
• 2011

The geology of the Gonaengisool-oreum, Bonggae-dong, Jeju consists of Yeongpyeong-dong basalt, Shinan-dong basalt, Bonggae-dong basalt and cinder in ascending order. Yeongpyeong-dong and Shinan-dong basalt is situated at the mid-mountain slope in southern part of the Gonaengisool-oreum, and Bonggae-dong basalt is located at the Gonaengisool-oreum area and nortgbern low foot of the mountain. Bonggae-dong basalt is aa lava flows with thick clinker. The Gonaengisool-oreum is isolated small volcano, that is, a lava shield having wide crater in the summit with several small pit craters. The average basal elevation of the Gonaengisool-oreum cone is 297.5 m(highest 300 m and lowest 295 m), and the highest summit is 304.5 m, average cone basal width is 597.5 m and cone height is 7.9 m, and mean slope of $1.5^{\circ}$ for the flank of the shield cone.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.255-265
• /
• 2013

The purpose of this study was to identify the variation factors of hypertension medication rate between regions and to use them as a basic data for establishment of hypertension management business plan which is customized by region. The data were collected from community health survey, National Statistics Office and National Health Insurance Corporation, and were analyzed using the geographically weighted regression. As the result of analysis, the factors that influenced the hypertension medication rate between regions were subjective recognition rate of health level, the rate of medical aid client and the number of health facility per one hundred thousand of population. According to the geographically weighted regression, the total of 230 regional regression models composed of major variables which affected the hypertension medication rate were calculated. However, this study has several limitations that the explanatory power of model is not high and others. Therefore, a follow-up study which is based on the actual data of compliance with hypertension medication will be necessary.

• Clean Technology
• /
• v.20 no.2
• /
• pp.97-102
• /
• 2014

Currently various studies are underway for dispensing high-viscosity phosphor. These studies have reported limitations and challenges in the dispensing process. The discharged amount of phosphor was approximately the same each time which is important for the implementation of high-efficiency white LED technology. This paper present high-viscosity phosphor dispensing process for white LED implementation by using electrostatic printing technology. The voltage controlled DOD (Drop-On-Demand) discharge experiment was studied to determine angle of drop meniscus at nozzle and dot diameter. With increase in Discharge voltage, the discharge angle of meniscus increased while dot diameter decreased. Therefore it can be concluded that we can control the discharge rate by controling the discharge angle of meniscus.