• 제목/요약/키워드: $x^2$ Distribution

검색결과 1,640건 처리시간 0.021초

ON CHARACTERIZATIONS OF THE WEIBULL DISTRIBUTION BY THE UPPER RECORD VALUES

  • Chang, Se-Kyung;Lee, Min-Young;Park, Young-Seo
    • Journal of applied mathematics & informatics
    • /
    • 제26권1_2호
    • /
    • pp.437-443
    • /
    • 2008
  • In this paper, we establish detailed characterizations of the Weibull distribution by the independence of the upper record values. We prove that X $\in$ W EI($\alpha$), if and only if $\frac{X_{U(n)}}{X_{U(n+1)}+X_{U(n)}}$ and $X_{U(n+1)}$ are independent for n $\geq$ 1. And we show that X $\in$ W EI($\alpha$), if and only if $\frac{X_{U(n+1)}-X_{U(n)}}{X_{U(n+1)}+X_{U(n)}}$ and $X_{U(n+1)}$ are independent for n $\geq$ 1.

  • PDF

Evaluation of Dowel Bearing Strength of Structural Composite Lumber(SCL) on the Effect of Moisture Content

  • Oh, Sei Chang
    • Journal of the Korean Wood Science and Technology
    • /
    • 제31권3호
    • /
    • pp.61-69
    • /
    • 2003
  • This study investigated the effect of moisture content and loading direction on dowel bearing strength of two types of SCL. Dowel bearing tests of LVL and PSL were conducted with two different MC level, 7.5% and 19%, and two different oriention, L-direction(loading parallel to grain) and X-direction(loading perpendicular to grain). Most of specimens showed typical load-deformation curves and intersected 5% offset line. Failure modes were classified into two categories; spliting(for L-direction specimens) and peeling(for X-direction specimens). Dowel bearing strength generally decreased with increasing MC. The decreasing rate was more significant in X-directon. ESG also decreased with increasing MC, and the ratio of ESG of 7.5% versus 19% was about 1.47. Dowel bearing strength of LVL and PSL in L-direction was higher than that of X-direction. This results indicated that MC and loading orientation had a significant effect on dowel bearing strength of SCL. The average dowel bearing strength of LVL were higher than that of PSL in each loading direction. Two types of probability distribution model were chosen to quantify strength distribution, normal and 2-parameter weibull distribution. The two models showed good agreement with the data, especially in lower tail of the cumulative distribution. Normal and 2-parameter weibull distribution seemed to proper model of the dowel bearing strength for each MC levels.

Formation Condition and Ferroelectric Properties of Niobate Tetragonal Tungsten Bronze (TTB) Type Ferroelectrics

  • Naoki Wakiya;Wang, Ju-Kai;Kazuo Shinozaki;Nobuyasu Mizutani
    • The Korean Journal of Ceramics
    • /
    • 제6권4호
    • /
    • pp.380-384
    • /
    • 2000
  • Crystal structure of $Ba_5-5X$Y$_10/3$Nb$_10$O$_30$ was tried to determine by Rietveld analysis using powder X-ray diffraction data. This compound has tetragonal tungsten bronze (TTB) structure with general formula, (Al)$_2$(A2)$_4$(B1)$_2$(B2)$_8$(O1)$_8$(O2)$_8$(O3)$_4$(O4)$_2$(O5)$_4$(O6)$_4$. However, it was difficult to determine the distribution of Ba and Y in Al and A2 sites by the analysis only. Combination of Rietveld analysis and site potentials calculation as well as lattice energy calculations helped to determine the distribution. As the result, it was clarified that $Ba^2+$ cations occupy A2 (pentagonal tunnel site) and $Y^3+$ cations occupy Al (cubic site). The distribution of cations at each site coincides with the distribution estimated by the difference of ionic radii. This supports the formation condition of TTB which was proposed in our previous report. $Ba_5-5X$Y$_10X/3$Nb$_10$O$_30$ shows ferroelectric characteristics. In this compound, remanent polarization decreases slightly with the composition X. On the other hand, the result of crystal structure determination reveals that atomic positions along c-axis for A1, A2, B1 and B2 cations are also decreased with the composition X. This would suggest that the dependence of remanent polarization on composition X is derived by the dependence of atomic coordinates on composition X.

  • PDF

Nickel Substitution Effects on Nano-sized Co, Mn and MnZn Ferrites Synthesized by Sol-gel Method

  • Choi, Won-Ok;Kwon, Woo Hyun;Chae, Kwang Pyo;Lee, Young Bae
    • Journal of Magnetics
    • /
    • 제21권1호
    • /
    • pp.40-45
    • /
    • 2016
  • Nickel substituted nano-sized ferrite powders, $Co_{1-x}Ni_xFe_2O_4$, $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$), were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently compared. The lattice constants decreased as quantity of nickel substitution increased, while the particle size decreased in $Co_{1-x}Ni_xFe_2O_4$ ferrite but increased for the $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites. For the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$) ferrite powders, the $M{\ddot{o}}ssbauer$ spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of $Mn_{0.8}Zn_{0.1}Ni_{0.1}Fe_2O_4$ consisted of two Zeeman sextets and one single quadrupole doublet due to the ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explain the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. The saturation magnetization decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. The coercivity decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. These variations could thus be explained by using the site distribution equations, particle sizes and spin magnetic moments of the substituted ions.

ON CHARACTERIZATIONS OF PARETO AND WEIBULL DISTRIBUTIONS BY CONSIDERING CONDITIONAL EXPECTATIONS OF UPPER RECORD VALUES

  • Jin, Hyun-Woo;Lee, Min-Young
    • 충청수학회지
    • /
    • 제27권2호
    • /
    • pp.243-247
    • /
    • 2014
  • Let {$X_n$, $n{\geq}1$} be a sequence of i.i.d. random variables with absolutely continuous cumulative distribution function(cdf) F(x) and the corresponding probability density function(pdf) f(x). In this paper, we give characterizations of Pareto and Weibull distribution by considering conditional expectations of record values.

THE AVERAGING VALUE OF A SAMPLING OF THE RIEMANN ZETA FUNCTION ON THE CRITICAL LINE USING POISSON DISTRIBUTION

  • Jo, Sihun
    • East Asian mathematical journal
    • /
    • 제34권3호
    • /
    • pp.287-293
    • /
    • 2018
  • We investigate the averaging value of a random sampling ${\zeta}(1/2+iX_t)$ of the Riemann zeta function on the critical line. Our result is that if $X_t$ is an increasing random sampling with Poisson distribution, then $${\mathbb{E}}{\zeta}(1/2+iX_t)=O({\sqrt{\;log\;t}}$$, for all sufficiently large t in ${\mathbb{R}}$.

비정질 ${Tb_{45.7}}{Fe_{54.3-x}}{Co_x}$${Tb_{50.2}}{Fe_{49.8-x}}{Co_x}$ (0$\leqq$x$\leqq$9.6) 합금박막의 자기변형 및 자기적 특성 (Magnetostrictive and Magnetic Properties of Amorphous ${Tb_{45.7}}{Fe_{54.3-x}}{Co_x}$${Tb_{50.2}}{Fe_{49.8-x}}{Co_x}$ (0$\leqq$x$\leqq$9.6) Alloy Thin Films)

  • 최용석;조성수;윤기갑;이완수;이영;김종오
    • 한국재료학회지
    • /
    • 제11권8호
    • /
    • pp.713-717
    • /
    • 2001
  • 비정질 $Tb_{45.7}$ $Fe_{54.3-x}$ /$Co_{x}$$Tb_{50.2}$ /$_{Fe}$ 49.8-x/$Co_{x}$ (0$\leq$$x\leq$9.6) 합금박막의 자기적 특성 및 자기변형특성에 대하여 체계적으로 조사하였다. 박막제조는 Fe 타게트에 Tb, Co 소편으로 구성된 복합타겟 방식의 rf 마그네트론 스퍼터링법에 의해 제조하였다. XRD 조사에의 한 박막의 미세구조는 잘 발달된 비정질 구조를 나타내었다. $Tb_{45.7}$ $Fe_{54.3-x}$ $Co_{x}$ (x=2~4)에서 우수한 고유자기변형특성 및 저자기장자기변형특성을 얻었다. 즉, 100 Oe의 저자장에서 130ppm의 자기변형을 나타내었으며 고유자기변형 (인가 자기장, 5 kOe)은 330ppm에서 400ppm으로 증가하였다.

  • PDF

딸기 전조재배 온실의 인공광 설치실태 및 조도분포 조사분석 (Current Status of Lighting System and Illumination Distribution in the Greenhouse for Light Culture of Strawberries)

  • 김태한;장익주;이경진
    • Journal of Biosystems Engineering
    • /
    • 제24권1호
    • /
    • pp.19-24
    • /
    • 1999
  • Motivated by the need for developing the more efficient lighting system for light culture of strawberries in the greenhouse, this paper aims at acquiring and suggesting more concrete and scientific foundation of illuminating position, numbers of light source by investigating the types of lighting system and illumination distribution in the greenhouse for light culture of strawberries. The results of investigation and experiment are summarized as following below: 1. The types of lighting system used in the greenhouse producing strawberries were classified as 1 line and 2 lines lighting system. 2. As for the arranging types of artificial light, 2 lines lighting system, were classified as Z-type, N-type and W-type. (Refer Fig. 3) 3. The results of illumination distribution for Z-type, N-type and W-type of 2 lines illuminating system in the greenhouse with a small size tunnel measured at the height of 1.5m from the ground with 220V, 100W lamp in 6m light gap showed that maximum illuminance are 961x, 1211x, 1251x, minimum illuminance are 4.41x, 4.71x, average illuminance are 33.71x, 43.11x, 44.51x and standard deviations are 28.31x, 35.41x, 38.31x at each types. 4. Proportion of the area below optimal illuminance to floor area at the two lines illuminating system of Z-, N-, and W-type in greenhouse were appeared as 39.4%, 26.0% and 26.3%, respectively. Also proportion of the area over optimal illuminance to floor area at the two lines illuminating system of Z-, N-, W-type in greenhouse were appeared as 16.8%, 14% and 14.7%, respectively. Thus N-type was superior to the others from the view points of optimal illumination distribution and energy saving.

  • PDF

Tutorial: Dimension reduction in regression with a notion of sufficiency

  • Yoo, Jae Keun
    • Communications for Statistical Applications and Methods
    • /
    • 제23권2호
    • /
    • pp.93-103
    • /
    • 2016
  • In the paper, we discuss dimension reduction of predictors ${\mathbf{X}}{\in}{{\mathbb{R}}^p}$ in a regression of $Y{\mid}{\mathbf{X}}$ with a notion of sufficiency that is called sufficient dimension reduction. In sufficient dimension reduction, the original predictors ${\mathbf{X}}$ are replaced by its lower-dimensional linear projection without loss of information on selected aspects of the conditional distribution. Depending on the aspects, the central subspace, the central mean subspace and the central $k^{th}$-moment subspace are defined and investigated as primary interests. Then the relationships among the three subspaces and the changes in the three subspaces for non-singular transformation of ${\mathbf{X}}$ are studied. We discuss the two conditions to guarantee the existence of the three subspaces that constrain the marginal distribution of ${\mathbf{X}}$ and the conditional distribution of $Y{\mid}{\mathbf{X}}$. A general approach to estimate them is also introduced along with an explanation for conditions commonly assumed in most sufficient dimension reduction methodologies.