• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.343-348
• /
• 2012

Developmental period, mummification, pupal mortality, and sex ratio of Korean strain of Aphelinus varipes F$\ddot{o}$rster parasitizing the green peach aphid, Myzus persicae were studied at 20, 25, 30, and $35^{\circ}C$ in controlled climate cabinets. The plastic container with a leaf disc of sweet pepper (Capsicum annuum L.) was used as experimental units. Green peach aphids at different developmental stages were reared in four different temperatures and presented to A. varipes for 12 hours. A female adult of A. varipes was allowed to parasitize for 12 hours in each plastic petri dish. The periods from egg to adult of A. varipes were 18.3 days, 14.7 days, 10.4 days, and 9.3 days at $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$, respectively. The pupal mortalities of A. varipes were 0%, 1.5%, 2.8%, and 10.2% at $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$, respectively. The mummifications of A. varipes were significantly different in all developmental stages of the aphid. The mummification of A. varipes parasitizing green peach aphid was the highest at 1st and 2nd in $20^{\circ}C$ and $25^{\circ}C$, but the highest at 3rd (84.4-85.0%) in $30^{\circ}C$ and $35^{\circ}C$. The host feedings of A. varipes were $20^{\circ}C$ (12.5%), $25^{\circ}C$ (17.3%), $30^{\circ}C$ (16%), and $35^{\circ}C$ (10.9%), respectively. The sex ratios of A. varipes female were $20^{\circ}C$ (49%), $25^{\circ}C$ (46%), $30^{\circ}C$ (69%), and $35^{\circ}C$ (60%), respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.274-274
• /
• 2008

This paper describes on the fabrication and characteristics of a 3C-SiC (Silicon Carbide) micro pressure sensor for harsh environment applications. The implemented micro pressure sensor used 3C-SiC thin-films heteroepitaxially grown on SOI (Si-on-insulator) structures. This sensor takes advantages of the good mechanical properties of Si as diaphragms fabricated by D-RIE technology and temperature properties of 3C-SiC piezoresistors. The fabricated pressure sensors were tasted at temperature up to $250^{\circ}C$ and indicated a sensitivity of 0.46 mV/V*bar at room temperature and 0.28 mV/V*bar at $250^{\circ}C$. The fabricated 3C-SiC/SOI pressure sensor presents a high-sensitivity and excellent temperature stability.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.18-35
• /
• 1999

Phase equilibria in the system Si3N4-TiC-TiCxN1-x-C-N were determined by thermodynamic calculations (CALPHAD-method). The reaction peaction paths for Si3N4-TiC and SiC-TiC composites in the Ti-Si-C-n system were simulated at I bar N2-pressure and varying terpreatures. At a temperature of 1923 K two tie-triangles (TiC0.34N0.66+SiC+C and TiC0.13N0.87+SiC+Si3N4) and two 2-phase fieds (TiCxN1-x+SiC; 0.13

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.45-45
• /
• 2009

This paper describes the formation of porous 3C-SiC by anodization. 3C-SiC thin films were deposited on p-type Si(100) substrates by APCVD using HMDS (Hexamethyildisilane: $Si_2(CH_3)_6$). UV-LED(380 nm) was used as a light source. The surface morphology was observed by SEM and the pore size was increased with increase of current density. Pore diameter of 70 ~ 90 nm was achieved at 7.1 $mA/cm^2$ current density and 90 sec anodization time. FT-IR was conducted for chemical bonding of thin film and porous 3C-SiC. The Si-H bonding was observed in porous 3C-SiC around wavenumber 2100 $cm^{-1}$. PL shows the band gap enegry of thin film (2.5 eV) and porous 3C-SiC (2.7 eV).

• Journal of Korean Society for Quality Management
• /
• v.26 no.1
• /
• pp.48-60
• /
• 1998

This paper proposes a fourth generation index $C_{psk}$, constructed from $C_{psk}$, by introducing the factor｜$\mu$-T｜ in the numerator as an extra penalty for the departure of the process mean from the preassigned target value T. The motivation behind the introduction of $C_{psk}$ is that when $T\neqM$ process shifts away from target are evaluated without respect to direction. All indices that are now in use assume normally distributed data, and any use of the indices on non-normal data results in inaccurate capability measurements. In this paper, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the six indices, $C_{p}$, $C_{pk}$, $C_{pm}$, ${C^*}_{psk}$, $C_{pmk}$, $C_{psk}$in terms of sensitivity to departure of the process median from the target value from the most sensitive one up to the least sensitive are $C_{psk}$, $C_{pmk}$, ${C^*}_{psk}$,$C_{pm}$, $C_{pk}$, $C_{p}$.

• Composites Research
• /
• v.32 no.3
• /
• pp.148-157
• /
• 2019

In this study, $C_f/SiC$, $SiC_f/SiC$ and $C_f-SiC_f/SiC$ ceramic composites reinforcing carbon fiber, SiC fiber and hybrid fiber were fabricated by hybrid TGCVI and PIP process. After the thermal shock cycle, 3-point bending and Oxy-Acetylene torch test, their mechanical behavior, oxidation and erosion resistance were evaluated. The $C_f/SiC$ composite showed a decrease in mechanical property along with increasing temperature, a pseudo-ductile fracture mode and a large quantity of erosion. The $SiC_f/SiC$ composite exhibited stronger mechanical property and lower erosion rate compared to the $C_f/SiC$, but brittle fracture mode. On the other hand, hybrid type of $C_f-SiC_f/SiC$ composite gave the best mechanical property, more ductile failure mode than the $SiC_f/SiC$, and lower erosion rate than the $C_f/SiC$. During the Oxy-Acetylene torch test, the $SiO_2$ formed by reaction of the SiC matrix with oxygen prevented further oxidation or erosion of the fibers for $C_f-SiC_f/SiC$ and $SiC_f/SiC$ composites particularly. In conclusion, if a hybrid composite with low porosity is prepared, this material is expected to have high applicability as a high temperature thermo-structural composite under high temperature oxidation atmosphere by improving low mechanical property due to the oxidation of $C_f/SiC$ and brittle fracture mode of $SiC_f/SiC$ composite.

• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.70-76
• /
• 1987

The effect of C12A7 and OH group on the synthesis of C3A by the sol-gel process using aluminum-sec-butoxide and calcium nitrate was studied. C3A by sol-gel method was compared with C3A obtained by the conventional method with respect to their reactivity of formation and crystal size. The sol-gel process for initial formation of C12A7 and C3A at lower temperature (1100, 1200$^{\circ}C$) was superior, but that for complete crystallization of C3A at higher temperature (1300, 1400$^{\circ}C$) was inferior to oxide mixture process. When heat treated under the atmosphere oxygen-free dried nitrogen eliminate the influence of OH group in C12A7, the reactivity of C3A from sol-gel sample incorporated OH group were poor, whereas that from oxide mixture sample showed remarkable effect. The poor crystallization of C3A at higher temperature is presumed to be due to the fact that incorporated OH group in C12A7 formed at lowr temperature might interrupt the diffusion of CaO to C12A7 to from C3A. The crystal size and the hydration characteristics of both C3A obtained by different processes exhibited almost the same results.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.61-76
• /
• 1997

Triacylglycerols of the seeds of Ginkgo biloba have been resolved by high-performace liquid chromatography(HPLC} in the silver-ion and reverse-phase modes. The fatty acids were identified by a combination of capillary gas chromatography and gas-chromatography /mass spectrometry as the methyl and /or picolinyl ester. The main components are $C_{18:2{\omega}6}$(39.0mol%), $C_{18:1{\omega}7}$(asclepic acid 21.5mol%), and $C_{18:1{\omega}9}$(oleic acid, 13.8mol%). Considerable amounts of unusual acid such as $C_{20:3{\Delta}^{5,11,14}$ (5.7mol%), $C_{18:2{\Delta}^{5,9}$(2.8mol%), and $C_{18:3}{\Delta}^{5,9,12}$(1.6mol%), were checked. In addition, an anteiso-branched fatty acid, 14-methylhexadecanoic acid, was also present as a minor component(0.9 mol%). The triacylglycerols were separated into 17 fractions by reverse-phase HPLC, and the fractionation was achieved according to the partition numnber(PN) in which a ${\Delta}^5$-non methylene interrupted double bond($^5$-NMDB) showed different behaviour from a methylene interrupted double bond in a molecule with a given cahinlength. Silver-ion HPLC exhibited excellent resolution in which fractions(23 fractions) were resolved on the basis of the number and configuration of double bonds. In this instance, the strength of interaction of a ${\Delta}^5$-NMDB system with silver ions seemed to be weaker than a methylene interrupted double bond system. The principal triacylglycerol species are as follows ; $(C_{18:2{\omega}6)2}/C_{18:1{\omega}7}$, $C_{18:1{\omega}9}/C_{18:1{\omega}7}/C_{18:2{\omega}6}$, $(C_{18:1{\omega}7)2}/C_{18:2{\omega}6}$, $C_{16:1{\omega}7}/C_{18:1{\omega}9}/C_{20:3}{\Delta}^{5,11,14}$, $C_{16:1{\omega}7}/C_{18:1{\omega}7}/C_{20:3}{\Delta}^{5,11,14}$, $C_{18:1{\omega}9}/C_{18:1{\omega}7}/C_{18:2{\omega}6}$, $C_{18:1{\omega}9}/C_{18:2}{\Delta}^{5,5}/C_{20:3}{\Delta}^{5,11,14}$, $(C_{18:1{\omega}7)2}/C_{18:2{\omega}6}$ and $(C_{18:1{\omega}9)2}/C_{18:2{\omega}6}$, while simple triacylglycerols without $C_{18:2{\omega}6})_3$ were not present. Stereospecific analysis showed that fatty acids with ${\Delta}^5$-NMDB system and saturated chains were predominantly located at the site of sn-3 carbon of glycerol backbones. It is evident that there is asymmetry in the distribution of fatty acids in the TG molecules of Ginkgo nut oils.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.487-490
• /
• 2010

This paper describes the elecrtical and optical characteristics of $N_2$ doped porous 3C-SiC films. Polycrystalline 3C-SiC thin films are anodized by $HF+C_2H_5OH$ solution with UV-LED exposure. The growth of in-situ doped 3C-SiC thin films on p-type Si (100) wafers is carried out by using APCVD (atmospheric pressure chemical vapor deposition) with a single-precursor of HMDS (hexamethyildisilane: $Si_2(CH_3)_6)$. 0 ~ 40 sccm $N_2$ was used for doping. After the growth of doped 3C-SiC, porous 3C-SiC is formed by anodization with $7.1\;mA/cm^2$ current density for anodization time of 60 sec. The average pore diameter is about 30 nm, and etched area is increased with $N_2$ doping rate. These results are attributed to the decrease of crystallinity by $N_2$ doping. Mobility is dramatically decreased in porous 3C-SiC. The band gaps of polycrystalline 3C-SiC films and doped porous 3C-SiC are 2.5 eV and 2.7 eV, respectively.

• Journal of Korea Game Society
• /
• v.15 no.4
• /
• pp.199-206
• /
• 2015

This paper introduces a serious game called freCman developed for C programming language beginners. Since key words, syntax, and programming structure of C programming language are unfamiliar for them, they feel uneasy and have many difficulties to study. We developed three games such as shooting star C, finding hidden errors, unscrambling C codes through which C beginners can study C language easily. Also we developed CTS(Code to Speech) which speeches C source codes like English statements so that C beginners can be familiar with C key words and statements. To prove effectiveness of the freCman, some experiments have been conducted with C language beginners. Experiment results show that the freCman helps beginners studying C programming language much.